Geri Dön

Poliakrilonitrilin NaOH hidroliz kinetiğinin incelenmesi

Başlık çevirisi mevcut değil.

  1. Tez No: 55658
  2. Yazar: MİNE YENER
  3. Danışmanlar: Y.DOÇ.DR. A. BAHATTİN SOYDAM
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1996
  8. Dil: Türkçe
  9. Üniversite: İstanbul Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 75

Özet

ÖZET Poliakrilonitrilin homopolimeri ve kopolimeri kullanılarak, sodyum hidroksit ile hidrolizi incelenmiştir. Bundan önceki çalışmalarda da poliakrilonitrilin alkali hidroksitlerle hidrolizi incelenmiştir. Kullandıkları yöntem ise, poliakrilonitrilin, dimetilformamit (DMF), dimetillmetakrilat (DMA), dünetüsûlfonat (DMSO), sodyumsülfosiyanür (NaSCN) gibi çözücülerinden herhangi birinde çözerek riflaks edildikten sonra, potasyum hidroksit ilavesi şeklindedir. Bu yöntemde poliakrilonitrilin çok kısa bir zamanda (15-20 dakika) hidroliz olmasına karşılık teknolojik olarak çok zor ve pahali bir yöntemdir. Bu çalışmada ise bu sistemlerden farklı olarak atmosfer ortamında vakum yapmadan hidrolizi incelenmiş olup, deneyler poliakrilonitrilin sodyum hidroksit ve suyun belli oranlarda kanşünlarak, değişik sıcaklıklarda, farklı zaman dilimlerinde hidrolizi basit bir deney düzeneği kurularak yapılmıştır. Elde edilen ürünlerin İR, UV spektrumlan ve potansiyometrik thrasyonlan ile hidroliz için gerekli optimum koşulların sağlanması amaçlanmıştır. vı

Özet (Çeviri)

SUMMARY THE STUDY OF KINETICS ABOUT THE HYDROLYSIS OF POLYACRLYLONITRILE IN SODIUMHYDROXID. Of the vinyl polymers mentioned, only a few have found commercial acceptance, the most important being poly(sodium acrylate), introduced in 1949. It has found widespread application in noncalchim muds such as fresh water, sah water and sodiumsurfactant muds. In combination with other polymers, it has also found application in the newer low-solids mud systems. Although numerous techniques may be employed to prapare poty(sodium acrylate), hydrolysis of polyacrylonitrile is at attractive from a commercial viewpoint. Alkaline hydrolysis of polyacrylonitrile proceeds rapidly at atmospheric pressure to yield a copolymer containing 60-70 mole % sodium carboxylate groups and 30-40 mole % amide groups. The composition of a copolymer of this type is illustrated as below. Chemical composition of a polymer derived by alkaline hydrolysis of polyacrylonitrile further hydrolysis is difficult to achieve due to steric and ionic factors. If polymers having other comonomer ratios are desired, they may be readily prepared by copolymerization of acrylic acid with acrylamide or by simultaneously polymerizing and hydrolyzing acrylamide in an alkaline medium. Because of acrylomtrile high polarity, it is characterized by a high polymerizability. Although the pure monomer is thermally stable (when heated to ISO degrees °C, only a small amount of the cyclic dimer, dicyanocyclobutane, is formed), it is very readily polymerized under the action of x rays, gamma-radiation, ultraviolet radiation, and the like. vuThe polymerization of acryionitrile is easily initiated by compounds acting as free-radical sources, such as peroxides or diazo compounds. In addition to the free-radical polymerization of acryionitrile, ionic polymerization is also known, which takes place at low temperatures under the action of such compounds as bortrifluoride, titaniumtetrachloride, and the like. Homogeneous polymerization is carried out in such a way that both the monomer and polymer are soluble in the reaction medium. Dimethylformamide is an example of a solvent which can be used in this method. Heterogeneous polymerization in bulk, emulsion or suspension is considerably more widely used. Pure acryionitrile does not polymerize readily without initiators or light, but polymerization proceeds rapidly and exothermically in the presence of free radicals or anionic initiators. Oxygen is a very strong inhibitor and forms peroxides. If oxygen is allowed to react to exhoustion, polymerization may then proceed at a very high rate through the thermal decomposition of peroxides, and explosion can ensue. Historically, synthetic fibers consume more than half of the acryionitrile produced throughout the world, and ABS-SAN copolymers are the second largest users. Nitrile elastomers have the longest history of acryionitrile usage. They are copolymers of butadiene with a broad range of acryionitrile content which gives a great variety of useful proporties, such as resistance to oils, greases, solvents, chemicals, heal; aging, and sunlight toughness, and ease of fabrication. The high nitrile-content copolymers are useful meterials for fiber production, having good resistance to stretch, heat, microorganisms, insects and many chemicals. The fibers also show good stability to washing and cleaning, good flex life and recovery from wrinkling, low moisture absorption, warm feel, and good bulking properties. The large-scale use of acryionitrile copolymers in the plastics industry is relatively recent; approximately 15% of the acryionitrile produced is used in this way. Applications in this field are likely to expand as new technology is devoloped to improve these copolymers. The nitril containing plastics have good dielectric proporties, light stability, high softening temperatures, high tensile and impact strengths, and good resistance to solvent and heat. vuiMonomelic acrylic acid, CHr=CHCOOH, was prepared by oxidation of acrolein in 1843. Lineer polymers of acrylic acid may be prepared by the general methods used with other vinyl monomers, nCH2 = CHCOQH Mrtrator»»^, Ofr- CH- Ofr- CH" COOH COOH Polymerization in aqueous solution at concentrations of 25% or less is convenient. Polymarization of more concentrated solutions or of undiluted monomer is not recommended because the high heat of polymerization makes polymerization difficult to control and produces insoluble polymer. Aqueous solutions of acrylic and methacrylic acids can be polymerized in the presence of a peroxydisulfate initiator at 90-100°C. A convenient formulation uses 10 parts of methacrylic acid, 90 parts of water, and 0,2 parts of ammonium peroxydisulfate. Acrylic acid can be polymerized in nonaqueous media, such as benzene, which are solvents for monomer but nonsolvents for polymer. Initiation can be accomplished with initiators soluble in the medium, used, such as benzoyl peroxide on azobissisobutyronitrile, or by the action of light. Poly(acrylic acid) and copolymers have a variety of uses in such diverse fields as mining, textiles, cosmetics, and papermaking. One of the earliest uses of poly(acrylic acid) was as a thickener. For this purpose the poly(acrylic acid) or its copolymer was sold as a concentrated solution of a sodium or ammonium sah, or as a dry polymer, in the acid form, which could be dissolved and then neutralized. During processing, textile fibers are subjected to much mechanical handling. To prevent damage during kinitting and weaving fibers are treated with warp size. Copolymers of acrylic acid and acrylamide are used as drilling-mud additives. During the drilling of an oil well, mud is pumped into drill hole. In certain formations, this mud tends to lose water to the sides of the drill hole and to become dry and caked. IXAcrylic acid can be copolymerized with divinylbenzene to make ion-exchange resins. The aim of this study is, via a simple process, to obtain PAA which is difficult to isolate in known expensive processes and has a wide applications area. The polyacrylicacid (PAA) is obtained by hydrolizing alkaline hydroxide of polyacrylonitrile (PAN) that is produced commercially with a large amount in AKSA, TÜRKİYE. Hydrolysis of polyacrylonitrile in the presence of alkaline hydroxide was done. In this procedure the polymer was dissolved in one of the expensive solvents given below, N,Ndimethylformamide (DMF), dimethyimetaacrylate (DMA) dimethyisülfanate, (DMSO) sodium thiocyanate (NaSCN) and the solution refluxed in on a thermostate with a constant stirring. Potassiumhydrokside solution was added to get the predetermined degree of hydrolysis and stirring was continued. The precipitated products were filtered, washed with hexane and dried under vacuum. The polyacrylonitrile (PAN) is hydrolyzed in a short time, but this is difficult and so expensive from technological point of view. In this study, the polyacrylonitrile (PAN) is hydrolyzed without using expensive solvents. The experiment was done in atmospheric pressure. In the beginnig of the experiment the molecular weights of the reagents (homopolyacrylonitrile and copolyacrylonitrile) are determined by using viscosimetry. For the hydrolysis of homopolyacrylonitrile and copolyacrylonitrile 2,5 g sample (^omopolyacrylonitrile/copolyacrylonitrile), 5 g NaOH and 50 ml water were stirred on a water bath at 40°C and 80°C by performining two paraleli experiment sets at the same time. The experiment is repeated at different time intervals (1-2-3 and 9 hours) The chemical mechanism of the process is illustrated as below. -(oK-pf -MŞt-^pi -fc-Tİ CN COOH CN n=x+yIn the infrared spectra nitrile groups of the species at 2300-2200 cm'1 disappear and stretching frequencies of the carboxyl groups are observed at 1500- 1450 cm'1. The values obtained of the potensiyometric titration data are similar to those of polyacrylicacid (PAA). So it can be concluded that the products may be the polymers which have carboxyl substituents. XI

Benzer Tezler

  1. Tez No

    536553

    Klinik analizlere yönelik aptamer tabanlı elektrokimyasal biyosensör tasarımı

    Aptamer based electrochemical biosensor design for clinical analysis

    EZGİ KIVRAK

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    BiyoteknolojiEge Üniversitesi

    Biyomedikal Teknolojiler Ana Bilim Dalı

    PROF. DR. PINAR KARA KADAYIFCILAR

  2. Tez No

    55056

    Poliakrilonitrilin poli (metilmetakrilat metakrilik asit) silfonlanmış polistiren ve iyonomerleri ile karışabilirliği

    Başlık çevirisi yok

    SERPİL SEVİNÇ EKŞİOĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    1996

    KimyaGazi Üniversitesi

    PROF.DR. OYA ŞANLI

  3. Tez No

    292332

    Chicken feather keratin based textile fibers

    Tavuk tüyü keratininden tekstil elyaf eldesi

    ÖZLEM İPEK KALAOĞLU

    Yüksek Lisans

    İngilizce

    İngilizce

    2010

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. OYA GALİOĞLU ATICI

  4. Tez No

    713424

    Preparation of polyacrylonitrile grafted onto nano-clay for removal of aluminum from aqueous solutions

    Poliakrilonitril aşılanmış nano-kil sentezi ve alüminyumun sulu ortamlardan uzaklaştırılmasında kullanılması

    EDA KÜÇÜK

    Yüksek Lisans

    İngilizce

    İngilizce

    2022

    Kimyaİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. BAHİRE FİLİZ ŞENKAL

  5. Tez No

    637545

    Karbon nanotüp, nanofı̇ber ve e-cam takvı̇yelı̇ epoksı̇ nanokompozı̇tlerı̇n yorulmalı korozyon davranışının ı̇ncelenmesı̇

    Investigation of corrosion fatigue behavior of carbon nanotube, nanofiber and e-glass reinforced epoxy nanocomposites

    GÖKSEL SARAÇOĞLU

    Doktora

    Türkçe

    Türkçe

    2020

    Makine Mühendisliğiİskenderun Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. AHMET YAPICI

Geri Dön