C-Peek kompozit malzemenin yorulma davranışının incelenmesi
An Investigation on fatique behaviour of c.peek composite material
- Tez No: 56206
- Danışmanlar: PROF. DR. LEVON ÇAPAN
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: PEEK, C-PEEK, Yorulma, C-Tarama, Kompozit malzemeler, Yorulma dayanımı, Composite materials, Fatigue strength
- Yıl: 1996
- Dil: Türkçe
- Üniversite: Kocaeli Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
C - PEEK KOMPOZTT MALZEMENİN YORULMA DAVRANIŞININ İNCELENMESİ A.Armağan ARICI
Özet (Çeviri)
AN INVESTIGATION ON FATIGUE BEHAVIOUR OF C - PEEK COMPOSITE MATERIAL A.Armağan ARICI KeywordstPEEK, C - PEEK, Fatigue, C - Scan Abstract: In this study, C - PEEK composite samples having two different stacking sequences were fatigued under different cycle number by using PWO-SCHENCK machine. Fatigue failures which appeared as a result of fatigue test were investigated by using Physical Acoustics Corp. / ABD. ULTRAPAC II. Tree point bending tests were done with samples which were prepared from fatigue samples by using Instron 4205 and the difference as a result of tree point bending test was determined. At the end of the test, it is seen that ultrasonic C-Scan is suitable for the non-destructive testing. In [0] composite samples, some damage appeared near comer roundings. At the tree point bending test flexural strength of the composite materials were decreased with increasing the cycle number.
Benzer Tezler
- Peek matrisli polimer kompozit temelli insan omurga implantı geliştirilmesi ve granül ekstrüzyon yöntemi ile eklemeli imalatı
Development of human spine implant based on peek matrix polymer composite and additive manufacturing by granule extrusion method
MERVE BAĞCI BİLGEN
Yüksek Lisans
Türkçe
2023
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ALAEDDİN BURAK İREZ
- Havacılık standartlarına uygun yüksek performanslı peek polimer harmanlarının hazırlanması ve karakterizasyonu
Preparation and characterization of high-performance peek polymer blends in compliance with aerospace standards
SELİN ARICAN
Doktora
Türkçe
2025
Kimya MühendisliğiYıldız Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ İNCİ SALT
- Dijital implant ölçü netliğinin artırılmasına etkili parametrelerin incelenmesi
Evaluation of the parameters effecting the accuracy of digital implant impressions
GÖRKEM GÖKSOY
Doktora
Türkçe
2024
Diş Hekimliğiİstanbul ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. BİLGE GÖKÇEN RÖHLİG
- Alt yapı ve kompozit vener renginin polieter eter keton (PEEK) restorasyonlarının optik özellikleri üzerine etkisi
Effect of core and composite veneer color on optical properties of polyether ether ketone (PEEK) restorations
DENİZ KARAKUŞ
Diş Hekimliği Uzmanlık
Türkçe
2022
Diş HekimliğiÇukurova ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. CEM KURTOĞLU
- Polietereterketon polimer yüzeyine farklı yüzey işlemi uygulamalarının kompozit rezin ve rezin siman bağlantısına etkilerinin değerlendirilmesi
Evaluation of the effect of different surface treatments to polyetereterketone polymer surface on composite resin and resin cement bonding
AYŞEGÜL HAZIR
Doktora
Türkçe
2022
Diş HekimliğiKırıkkale ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. SAADET ATSÜ
PROF. DR. YASEMİN KESKİN