Tekstil endüstrisi atıksularının fenton ve foto-fenton prosesleri ile arıtılabilirliğinin incelenmesi
Investigation of the treatability of textile industry wastewaters with fenton and photo-fenton processes
- Tez No: 562843
- Danışmanlar: DOÇ. DR. BÜLENT SARI
- Tez Türü: Yüksek Lisans
- Konular: Çevre Mühendisliği, Environmental Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2019
- Dil: Türkçe
- Üniversite: Çukurova Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Çevre Bilimleri Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 90
Özet
Fenton ve Foto-Fenton proseslerinin, Kimyasal Oksijen İhtiyacı (KOİ), Askıda Katı Madde (AKM) ve Renk gibi atık sulardaki kirlilik yükünü belirleyen parametrelerin ortadan kaldırılmasındaki performansı, Adana'daki bir tekstil fabrikasından alınan atık su numuneleri ile gerçekleştirilmiştir. Fenton proses çalışmalarında pH, Fe+2 ve H2O2 konsantrasyonu gibi parametrelerin fenton süreci üzerindeki etkisi tespit edilmeye çalışılmıştır. Foto-Fenton prosesinde ise fenton prosese ilave UV-A LED foto-sistem kullanılmıştır. Her iki proseste de etkin arıtma verimleri pH 3' te elde edilmiştir. Fenton proseste, 0,70 g Fe+2/L ve 2 mM H2O2 kullanılarak %81 KOİ, %80 AKM ve %93 Renk giderimi elde edilmiştir. Foto-Fenton prosesinde ise 0,278 g Fe+2/L, 0,54 g Fe+3/L ve 2 mM H2O2 kullanılan koşullarda %92 KOİ, %81 AKM ve %94 Renk giderimleri sağlanmıştır.
Özet (Çeviri)
The performance of Fenton and Photo-Fenton processes in the elimination of the parameters determining the pollution load in wastewaters such as Chemical Oxygen Demand (COD), Suspended Solids (AKM) and Color were carried out with wastewater samples taken from a textile factory in Adana. In the Fenton process studies, the effect of parameters such as pH, Fe2+ and H2O2 concentration on the Fenton process was determined. In the Photo-Fenton process, additional UV-A LED photo-system was used in addition to the Fenton process. In both processes, effective treatment efficiencies were obtained at pH 3, Fenton process, 0.70 g Fe2+/L and 2 mM H2O2 using 81% COD, 80% AKM and 93% colour removal were obtained. In the photo-Fenton process, 92% COD, 81% AKM and 94% Color removal were achieved under 0.278 g Fe2+/ L, 0.54 g Fe3+/ L and 2 mM H2O2
Benzer Tezler
- Tekstil endüstrisi atık sularının membran destekli ileri oksidasyon prosesleri ile geri kazanımı
Recovery of textile industry wastewater by membrane-assisted advanced oxidation processes
HANDAN ATALAY EROĞLU
Doktora
Türkçe
2023
Çevre MühendisliğiOndokuz Mayıs ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. FERYAL AKBAL
- Tekstil endüstrisi atıksularının hidrodinamik kavitasyon destekli fotokatalitik ve fotofenton prosesleri ile arıtımının incelenmesi
Investigation of textile industrial wastewater treatment using photocatalytic and photofenton processes enhanced by hydrodynamic cavitation
YASEMİN ÇALIŞKAN
Doktora
Türkçe
2019
Çevre MühendisliğiGebze Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. HÜSEYİN CENGİZ YATMAZ
PROF. DR. NİHAL BEKTAŞ
- Degradation of colored industrial wastewaters by advanced oxidation processes
Renkli endüstriyel atıksuların ileri oksidasyon prosesleriyle arıtımı
FATMA NİHAN DOĞAN
Yüksek Lisans
İngilizce
2012
Çevre MühendisliğiFatih ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
DOÇ. DR. GÖKÇE TEZCANLI GÜYER
YRD. DOÇ. DR. SAMİ GÖREN
- Foto elektro-fenton prosesi ile tekstil atıksularının arıtılması
Treatment of textile waswater using photo electro-fenton process
ÖMER FARUK KONT
Yüksek Lisans
Türkçe
2022
Çevre MühendisliğiSakarya ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ BEYTULLAH EREN
- Tekstil endüstrisi atıksularından fenton prosesi ve biyosorpsiyon yöntemi ile renk giderimi ve örnek tesis modeli
Decolorization of textile industry effluents by the method of fenton process and biosorption example facility model
FATİH GÖZÜKIZIL
Yüksek Lisans
Türkçe
2013
Makine MühendisliğiBilecik Şeyh Edebali ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. NURGÜL ÖZBAY