Geri Dön

Influence of thermal damage on physico-mechanical properties of carbonate rocks: Porosity, hardness, UCS and ultrasonic wave evolutions

Karbonatlı kayaçların fiziksel-mekaniksel özellikleri üzerinde termal şok işlemiyle yıpranmanın etkisinin incelenmesi: Porozite, sertlik, tek eksenli basınç dayanımı ve p- dalga ölçümleri

  1. Tez No: 565090
  2. Yazar: ELİF AKGÜL
  3. Danışmanlar: DOÇ. DR. AVNİ GÜNEY
  4. Tez Türü: Yüksek Lisans
  5. Konular: Maden Mühendisliği ve Madencilik, Mining Engineering and Mining
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2019
  8. Dil: İngilizce
  9. Üniversite: Muğla Sıtkı Koçman Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Maden Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 97

Özet

Bu çalışmada, Mugla yöresinde bulunan farklı karbonat kayacı olan mermer türlerinden alınan örnekler üzerinde 100°C'de ısınma-soğuma (termal şok) ve 25, 100, 200, 300, 400 ve 500°C'de yüksek sıcaklığa maruz kalma deneyleri yapılmıştır. Örnekler 2 farklı kategoriye ayrılarak ilk deney setinde 5 farklı mermer örneği üzerinde öncelikle termal şok deneyleri yapılmıştır. Daha sonra, aynı tür mermer örnekleri 25, 100, 200, 300, 400, 500, 600, 700 ve 800°C sıcaklıklara kadar ısıtılmışlardır. İkinci deney setinde 3 farklı mermer örneği kullanılmıştır. Bu örnekler 25, 100, 200, 300, 400 ve 500°C sıcaklığa maruz bırakılmışlardır. Sıcaklık işlemlerinin uygulanmasından sonra, örnekler üzerinde Shore sertliği, P-dalga hızı, gözeneklilik, birim hacim ağırlığı ve tek eksenli basınç (TEB) dayanımı deneyleri yapılmıştır. Termal şok deneyinden sonra yapılan ölçümlerde örneklerin yoğunluk, P-dalga hızı, Shore sertliği ve tek eksenli basınç dayanımlarında azalma gözlenirken, toplam porozite değerlerinde artış gözlenmiştir. 800°C sıcaklığa ısıtılan örneklerin ağırlık, P-dalga ve Shore sertliği değerlerindeki düşüşler ise termal şok deneyinin etkisinden çok daha fazla olmuştur. İkinci deney setinden sonra yapılan ölçümlerde ise örneklerin ağırlık, P-dalga hızı ve Shore sertliği değerlerinde azalma görülürken, toplam porozite değerleri artmıştır. Yapılan deneyler sonucunda yüksek sıcaklığın mermer örneklerinin üzerinde, sadece fiziksel bozunmadan dolayı oluşan etkiler incelenmiş ve değerlendirilmiştir.

Özet (Çeviri)

In this study, heating and cooling (Thermal shock) tests were conducted at temperature of 100°C and thermal damage tests were carried out at temperatures of 25, 100, 200, 300, 400, 500, 600, 700 and 800°C on different carbonate rocks sampled from various marble types quarried in Mugla Region. The samples were divided into 2 different categories: On the first set of experiments, thermal shock tests were performed on 5 different marble types. The samples of same type of marble were then heated to the temperature steps of 25, 100, 200, 300, 400, 500, 600, 700 and 800°C for thermal damage. On the second set of experiments, the samples of three different marble types were tested. The samples were heated to the temperature steps of 25, 100, 200, 300, 400 and 500°C for thermal damage. Shore hardness, P-wave velocity and the weight loss tests were conducted following each temperature step. Porosity, density and uniaxial compressive strength (UCS) tests were implemented following the final temperature step of 500°C. In the end of thermal shock tests, density, P-wave velocity, Shore hardness and uniaxial compressive strength values seemed to decrease and total porosity values tended to increase. In the end of thermal damage tests at temperature of 800°C; the decreases in weight, P-wave and Shore hardness values were seemed to be much higher than that of thermal shock tests. In the end of second set of experiments, P-wave velocity, Shore hardness and the weight were decreased and the total porosity was increased. In the end of experimental works, effects of physical weathering solely on marble samples due to high temperatures were investigated and assessed.

Benzer Tezler

  1. Gözenekli bazı doğal taşların fiziksel bozundurma koşulları altında yapısal ve termal özelliklerindeki değişimlerin incelenmesi

    Analysis of the changes in structural and thermal properties of some porous material stones under physical weathering conditions

    HİLAL ÖZER TOKLU

    Doktora

    İngilizce

    İngilizce

    2018

    Maden Mühendisliği ve MadencilikSüleyman Demirel Üniversitesi

    Maden Mühendisliği Ana Bilim Dalı

    DOÇ. DR. İBRAHİM UĞUR

  2. Bor ve mineral katkılı selülozik yalıtım malzemesi üretimi ve karakterizasyonu

    Production of boron and mineral reinforced cellulosic insulation material and its characterization

    İBRAHİM ETHEM KARAAĞAÇLIOĞLU

    Doktora

    Türkçe

    Türkçe

    2012

    Maden Mühendisliği ve Madencilikİstanbul Teknik Üniversitesi

    Maden Mühendisliği Ana Bilim Dalı

    PROF. DR. MEHMET SABRİ ÇELİK

  3. Ortodontik seramik braketlerin laser ile sökülmesinin incelenmesi

    Investigation of laser debonding of orthodontic ceramic brackets

    LERNA DEMİRCİ

    Yüksek Lisans

    Türkçe

    Türkçe

    2015

    Biyomühendislikİstanbul Teknik Üniversitesi

    Elektronik ve Haberleşme Mühendisliği Ana Bilim Dalı

    PROF. DR. FATMA İNCİ ÇİLESİZ

    PROF. DR. MURAT GÜLSOY

  4. Dişli çarklarda yenme olayının yağlama bakımından incelenmesi

    A Study on the scuffing of gears with respect to lubrication

    GHOLAMHASSAN PAYGANE

    Doktora

    Türkçe

    Türkçe

    1990

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. MUSTAFA AKKURT