Geri Dön

Diş protez kaplama fritlerinin üretimi ve karakterizasyonu

Production and characterization of the dental prostheses coating frits

  1. Tez No: 579182
  2. Yazar: AHMET NAZIM BİBİNOĞLU
  3. Danışmanlar: PROF. DR. RAMAZAN YILMAZ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Biyoteknoloji, Diş Hekimliği, Metalurji Mühendisliği, Biotechnology, Dentistry, Metallurgical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2019
  8. Dil: Türkçe
  9. Üniversite: Sakarya Uygulamalı Bilimler Üniversitesi
  10. Enstitü: Lisansüstü Eğitim Enstitüsü
  11. Ana Bilim Dalı: İmalat Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 108

Özet

Diş protezlerinin gün geçtikçe kullanımı artmaktadır. Diş protezlerinin estetik ve kullanılabilirlik açısından iyileştirme çalışmaları da hız kazanmaktadır. Bu çalışmada ticari olarak kullanılan bazı diş protez kaplama fritlerin karakterizasyonları yapılmış ve özellikleri belirlenmiştir. Bu dental protez kaplama fritlerinin fiziksel özelliklerinin iyileştirilmesi için çalışmalar yapılmış ve insan sağlığı açısından tehdit oluşturabilecek safsızlıkları içermeyen dental protez kaplama fritlerinin üretimi gerçekleştirilmiştir. Geliştirme aşamasında dental protez kaplama frit reçeteleri belirlenirken zararlı safsızlıkların içermemesine, orta sıcaklık pişirim fritleri olarak kullanılabilmesine, hem tam porselen sistemlere hem de metal destekli porselen sistemlere rahatlıkla uyum sağlayabilmesine dikkat edilmiş ve üretimleri yapılmıştır. Üretilen dental protez kaplama fritlerinin termal analizleri, ıslatma açısı analizleri, yüzey renk ve parlaklık analizleri ile mikroyapı karakterizasyon incelemeleri yapılmıştır. Çalışmada ısı mikroskobu, dilatometre, spektrofotometre ve glossmetre teknikleri uygulanmıştır. Mikroyapı çalışmalarında taramalı elektron mikroskobu ve noktasal enerji dağılımlı spektrometre (EDS) element analizleri yapılmıştır. XRF analizi ile yüzde ağırlıkça 0,15> altında kalması gereken safsızlıkların, belirlenen oranların altında olduğu gözlemlenmiştir. Yapılan çalışmalarda doğal diş renk değerlerine, uygulandığı dental porselen altlık ile uyumlu olan ısıl davranışlara ve ıslatma açısı ile belirlenen kir tutma kapasitesine sahip olup en iyi sonuçları veren zirkonyum oksit içeren 4 nolu reçete olduğu gözlenmiştir.

Özet (Çeviri)

The usage of dental prostheses is increasing day by day. Improvement studies in terms of aesthetics and usability of the dental prostheses are gaining speed. In this study, characterization and properties of some commercially used dental prosthesis coating frit were determined. The studies were carried out to improve the physical properties of these dental prosthesis coating frit and production of dental prosthesis coating frit without impurities that could pose a threat to human health was realized. During the development process, formulas of the dental prosthesis coating frits were considered which does not contain harmful impurities, can be used as medium temperature firing frit, both full porcelain systems and metal-supported porcelain systems can be easily adapted. Their productions were made. Thermal analysis, contact angle analysis, surface color and gloss analysis and microstructure characterization of dental prosthesis coating frit were analyzed. In this study, techniques of heat microscope, dilatometer, spectrophotometer and glossmeter were applied. Scanning electron microscopy and energy dispersive X-ray spectroscopy (EDS) element analyzes were analyzed for microstructure studies. By XRF analysis, it was observed that the impurities, which should remain below 0.15% by weight, were below the determined ratios. In the studies, the formula of number 4 within zirconium oxide was observed the best properties according to natural tooth color values, thermal behaviors compatible with the dental porcelain base and the contamination performance of contact angle.

Benzer Tezler

  1. Determination of the effect of viscoelasticity on the bond strength of a dental metal-ceramic system using finite element method

    Viskoelastisitenin dental metal-seramik bağ kuvvetine etkisinin sonlu elemanlar metodu kullanılarak belirlenmesi

    UTKU CEMAL ÜNLÜ

    Yüksek Lisans

    İngilizce

    İngilizce

    2007

    BiyomühendislikBoğaziçi Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. ŞEBNEM ÖZÜPEK

  2. İki farklı tam seramik sistemin kullanıldığı üç üyeli sabit protez mukavemetinin sonlu elemanlar stres analizi ile incelenmesi

    Strength assessment of two all ceramic systems used for posterior fixed dentures by finite element analysis

    CEM KIRCELLİ

    Doktora

    Türkçe

    Türkçe

    2004

    Diş HekimliğiÇukurova Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    DOÇ.DR. HAKAN UYSAL

  3. İmplant üstü sabit protetik restorasyonlarda kullanılan farklı kaplama materyallerinin, stres dağılımına etkisi

    The Effect of stress distribution of the veneering materials on the implant supported fixed prosthetic restorations

    YALÇIN ÇİFTÇİ

    Doktora

    Türkçe

    Türkçe

    1998

    Diş HekimliğiHacettepe Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    DOÇ. DR. ŞENAY CANAY

  4. Üç boyutlu yazıcıyla üretilmiş total protez kaide materyalinde yapılan farklı yüzey işlemlerinin renk stabilitesine etkisi

    The effect of different surface treatments on the color stability of the total denture base material produced with A three-dimensional printer

    YUSUF ŞAMİL DOYMUŞ

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2021

    Diş HekimliğiHacettepe Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. AHMET ATİLA ERTAN

  5. Seramik ve seramik benzeri materyallerin titanyumla adezyonunda rezin simanın ve yüzey işlemlerinin etkisinin incelenmesi

    The effect of surface treatments and resin cement on the adhesion of ceramic and ceramic-like materials to titanium

    BERKCAN TUNCER

    Doktora

    Türkçe

    Türkçe

    2017

    Diş HekimliğiHacettepe Üniversitesi

    Protez Ana Bilim Dalı

    PROF. DR. MEHMET MUHTAROĞULLARI