Analysis, design, simulation, and measurements of flexible high impedance surfaces
Başlık çevirisi mevcut değil.
- Tez No: 588778
- Danışmanlar: PROF. CONSTANTINE BALANIS
- Tez Türü: Doktora
- Konular: Havacılık ve Uzay Mühendisliği, Mekatronik Mühendisliği, Elektrik ve Elektronik Mühendisliği, Aeronautical Engineering, Mechatronics Engineering, Electrical and Electronics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2013
- Dil: İngilizce
- Üniversite: Arızona State Unıversıty
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
High Impedance Surfaces (HISs), which have been investigated extensively, have proven to be very efficient ground planes for low profile antenna applications due to their unique reflection phase characteristics. Another emerging research field among the microwave and antenna technologies is the design of flexible antennas and microwave circuits to be utilized in conformal applications. The combination of those two research topics gives birth to a third one, namely the design of Conformal or Flexible HISs (FHISs), which is the main subject of this dissertation. The problems associated with the FHISs are twofold: characterization and physical realization. The characterization involves the analysis of scattering properties of FHISs in the presence of plane wave and localized sources. For this purpose, an approximate analytical method is developed to characterize the reflection properties of a cylindrically curved FHIS. The effects of curvature on the reflection phase of the curved FHISs are examined. Furthermore, the effects of different types of currents, specifically the ones inherent to finite sized periodic structures, on the reflection phase characteristics are observed. After the reflection phase characterization of curved HISs, the performance of dipole antennas located in close proximity to a curved HIS are investigated, and the results are compared with the flat case. Different types of resonances that may occur for such a low-profile antenna application are discussed. The effects of curvature on the radiation performance of antennas are examined. Commercially available flexible materials are relatively thin which degrades the bandwidth of HISs. Another practical aspect, which is related to the substrate thickness, is the compactness of the surface. Because of the design limitations of conventional HISs, it is not possible to miniaturize the HIS and increase the bandwidth, simultaneously. To overcome this drawback, a novel HIS is proposed with a periodically perforated ground plane. Copper plated through holes are extremely vulnerable to bending and should be avoided at the bending parts of flexible circuits. Fortunately, if designed properly, the perforations on the ground plane may result in suppression of surface waves. Hence, metallic posts can be eliminated without hindering the surface wave suppression properties of HISs.
Benzer Tezler
- Yapay manyetik iletken (AMC) yapılarının giyilebilir antenlerde özgül emilim oranı (SAR) ve kazanç iyileştirmesine etkisi
Effect of artificial magnetic conductor (AMC) structures on specific absorption rate (SAR) and gain improvement in wearable antennas
BİLAL YÜKSEL
Yüksek Lisans
Türkçe
2025
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesiİletişim Sistemleri Ana Bilim Dalı
PROF. DR. MESUT KARTAL
- Ultra geniş bant uygulamaları için esnek papyon anten tasarımı
Design of flexible bow-tie antenna for ultrawide band applications
AYKUT CAN DEMİRBAŞ
Yüksek Lisans
Türkçe
2026
Elektrik ve Elektronik MühendisliğiSakarya ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ BAHA KANBEROĞLU
- Serigrafik baskı ile LFP lityum-iyon batarya hücreleri: elektrot mürekkep formülasyonu ve performans incelemesi
Serigrafik baskı ile LFP lityum-iyon batarya hücreleri: Elektrot mürekkep formülasyonu ve performans incelemesi
SAMET USTA
Doktora
Türkçe
2026
EnerjiSakarya ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. TUĞRUL ÇETİNKAYA
- Sincap kafesli asenkron makinenin rotor alan yönlendirmeli kontrolü
Rotor field-orientation control of a squirrel cage induction machine
SAFFET ALTAY
Yüksek Lisans
Türkçe
1995
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiPROF.DR. M. EMİN TACER
- Koruge yüzeyli düz esnek metal hortumlarda basınç düşümü ve ısı transferinin araştırılması
Investigation of pressure drop and heat transfer in straight flexible metal hoses with corrugated surface
ZEYNEP MERVE ALPARSLAN
Yüksek Lisans
Türkçe
2023
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. HASAN GÜNEŞ