Geri Dön

Scissor-Jack-damper energy dissipation system

Başlık çevirisi mevcut değil.

  1. Tez No: 597914
  2. Yazar: ANI NATALI SIGAHER BOYLE
  3. Danışmanlar: PROF. MICHAEL C. CONSTANTINOU
  4. Tez Türü: Doktora
  5. Konular: Deprem Mühendisliği, Earthquake Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2004
  8. Dil: İngilizce
  9. Üniversite: State University of New York at Buffalo
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 248

Özet

Özet yok.

Özet (Çeviri)

Installation of damping devices has been limited to diagonal or chevron brace configurations until the recent development of the toggle-brace configurations. These configurations magnify the effect of damping devices, thus facilitating their use in stiff framing systems. Such systems are not good candidates for supplemental damping when conventional diagonal or chevron brace configurations are used, due to the high cost of the damping system. This report introduces the scissor-jack-damper system that was developed as a variant of the toggle-brace-damper systems. An additional advantage of the scissor-jack-damper to the toggle-brace-damper system is in the compactness of the configuration. A theoretical treatment of the scissor-jack-damper system is presented and the effectiveness is demonstrated through testing of a large-scale steel framed model structure under imposed harmonic displacement on the strong floor, as well as dynamic excitations on the earthquake simulator. Experiments demonstrate that despite the small size of the damping device considered, the scissor-jack system provided a considerably significant amount of damping while also substantially reducing the seismic response of the tested structure. Comparisons of response-history and simplified analyses with the experimental findings produce results that are consistent. Application of the scissor -jackdamper system in a new building structure in Cyprus is described.

Benzer Tezler

  1. Open space damping system theory and experimental validation

    Başlık çevirisi yok

    ERKAN POLAT

    Doktora

    İngilizce

    İngilizce

    2016

    Çevre MühendisliğiState University of New York at Buffalo

    Prof. MICHAEL C. CONSTANTINOU

  2. Tarım traktörü ile çalıştırılan bir meyve hasat platformu tasarımı

    Design of a fruit harvest platform driven by tractor hydraulics

    MUSTAFA ÜÇGÜL

    Yüksek Lisans

    Türkçe

    Türkçe

    2007

    Makine MühendisliğiKahramanmaraş Sütçü İmam Üniversitesi

    Tarım Makineleri Ana Bilim Dalı

    YRD. DOÇ. DR. ALİ AYBEK

  3. Düşük Enerji Bölgesinde 156Gd Çekirdeğinin Teorik ve Deneysel İncelenmesi

    Theoretical and Experimental Investigation of 156Gd Nucleus at Low-Energy Region

    ESRA AÇIKSÖZ

    Doktora

    Türkçe

    Türkçe

    2016

    Fizik ve Fizik MühendisliğiAkdeniz Üniversitesi

    Fizik Ana Bilim Dalı

    DOÇ. DR. ORHAN BAYRAK

  4. Kinematic design of scissor linkages

    Makas mekanizmalarının kinematik tasarımı

    CEVAHİR KARAGÖZ

    Yüksek Lisans

    İngilizce

    İngilizce

    2018

    Makine Mühendisliğiİzmir Yüksek Teknoloji Enstitüsü

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. GÖKHAN KİPER

  5. Makaslı kaldırıcının öntasarımı için bir yazılım ve arayüz geliştirilmesi

    A software and interface development for preliminary design of scissor lift

    SEZGİN ESER

    Yüksek Lisans

    Türkçe

    Türkçe

    2016

    Makine MühendisliğiUludağ Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. SEVDA TELLİ ÇETİN