Serbest düşülü savakların mansabında oluşan yerel oyulmanın deneysel incelenmesi
Experimental investigation of local scour occurring on downstream bed by free overfall weirs
- Tez No: 619673
- Danışmanlar: PROF. DR. MUHAMMET EMİN EMİROĞLU
- Tez Türü: Doktora
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2020
- Dil: İngilizce
- Üniversite: Fırat Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 189
Özet
Oyulma problemi, hidrolik yapıların emniyeti açısından büyük önem taşımaktadır. Serbest düşülü savakların mansabında oluşan yerel oyulma, hidrolik yapının ağır hasar görmesine sebep olabilmektedir. Her savak türünün ve şeklinin akım karakteristikleri birbirinden farklı olmaktadır. Serbest düşen jetin mansap havuzunda oluşturduğu jet genişliği, jet kalınlığı, jet çarpma hızı ve açısı, penetrasyon derinliği, akım içerisine sokulan hava kabarcıkları miktarı, savağın havalandırma performansı ve jet yörüngesi gibi akım karakteristikleri oyulma geometrisi üzerinde önemli etkiye sahiptir. Bu çalışmada; dikdörtgen, üçgen, trapez ve labirent savakların mansap havuzunda oluşturdukları yerel oyulmalar, deneysel olarak araştırılmıştır. Bu kapsamda, hidrolik laboratuvarında iki adet deney düzeneği inşa edilmiştir. Birinci deney düzeneği, ikinci deney düzeneğinin prototipi olacak şekilde tasarlanmış ve model ölçeği 1/2.4 olarak alınmıştır. Deneyler, her iki deney düzeneğinde de eş zamanlı yürütülmüştür. Yerel oyulmanın zamanla değişimi, maksimum oyulma derinliği ve oyulma geometrisi; farklı savak türleri (dört adet), farklı düşü yükseklikleri (dört adet), farklı kuyruksuyu derinlikleri (iki adet), farklı medyan dane çapları (üç adet), farklı birim debi değerleri (dört adet) dikkate alınarak deneyler yapılmıştır. Jet genişliği, jet yörüngesi ve jet çarpma hızı da çalışma kapsamında belirlenmiştir. Her bir savak türü için maksimum oyulma derinliğini veren doğrusal olmayan denklemler elde edilmiştir. Elde edilen denklemlerin prototipte güvenle kullanılabilmesi için model ile prototip arasındaki ilişki belirlenmeye çalışılmıştır. Deney sonuçları literatür ve sayısal sonuçlarla karşılaştırılmıştır. Savak türünün oyulma geometrisi üzerinde çok önemli bir parametre olduğu belirlenmiştir. Üçgen ve labirent savaklardan çıkan jetin mansap havuzunda oluşturduğu maksimum oyulma derinliği, test edilen diğer savak türlerine göre çok daha az olmuştur. Labirent savaklardan düşen serbest jet, diğer savak türlerine göre hidrolik yapıya daha yakın mesafede mansap havuzuna çarptığı ve oyulmanın daha geniş alana yayıldığı belirlenmiştir.
Özet (Çeviri)
The scour problem is of great importance for the safety of hydraulic structures. Local scouring in the downstream of free overfall weirs can cause severe damage to the hydraulic structure. The flow characteristics of each weir type and shape are different from each other. Flow characteristics such as jet expansion, jet thickness, jet impact velocity and angle, penetration depth, the amount of air bubbles entrained into the plunge pool, the aeration performance of the weir, and the jet trajectory have a significant effect on the scour geometry. In this study; the local scour in the downstream pool of rectangular, triangular, trapezoidal and labyrinth weirs were investigated experimentally. In this context, two experimental setups were made in the hydraulic laboratory. The first experimental setup was designed as the prototype of the second experimental setup, and the model scale was taken as 1/2.4. The experiments were carried out simultaneously in both experimental setups. Variation in time of local scour, maximum scour depth and scour geometry; different weir types (four items), different head heights (four items), different tailwater depths (two items), different median grain diameters (three items), different unit discharge values (four items) were taken into consideration. Water jet expansion, jet trajectory and jet impact velocity were also determined in the current study. The non-linear equations giving the maximum scour depth for each wier type were obtained. The relationship between the model and the prototype was determined in order to use the obtained equations safely in the prototype. Experimental results were compared with the literature and numerical results. It is concluded that weir type is a very important parameter on scouring geometry. The maximum scour depth occured by the jet from the triangular and labyrinth weirs was much less than the other weir types tested. It was shown that the free overfall jet from the labyrinth weirs impacts the downstream pool at a closer distance to the hydraulic structure than the tested weirs. Moreover, the scouring geometry in the downstream pool for the labyrinth weirs covers wider area than that of the other weirs tested.
Benzer Tezler
- Serbest düşülü savakların mansabında oluşan yerel oyulmanın sayısal analizi
Numerical analysis of local scour occurring on downstream bed by free overfall weir
ERDİNÇ İKİNCİOĞULLARI
Doktora
Türkçe
2019
Mühendislik BilimleriFırat Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. MUHAMMET EMİN EMİROĞLU
PROF. DR. MEHMET CİHAN AYDIN
- Effect of roughness on flow measurements in sloping rectangular channels with free overfall
Serbest düşülü eğimli dikdörtgen kesitli kanatlarda yüzey pürüzlülüğün akım ölçümlerine etkisi
CAN ERSEN FIRAT
Yüksek Lisans
İngilizce
2004
İnşaat MühendisliğiOrta Doğu Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DR. ŞAHNAZ TİĞREK
- Flow measurements in sloping rectangular channels with free overfall
Serbest düşülü eğimli dikdörtgen kesitli kanallarda akım ölçümleri
ÇAĞRI KUŞCU TURAN
Yüksek Lisans
İngilizce
2002
İnşaat MühendisliğiOrta Doğu Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DR. ŞAHNAZ TİĞREK
PROF. DR. A. METİN GER
- Discharge predictions using ann in sldping rectangular channels with free overfall
Serbest düşülü eğimli dikdörtgen kesitli kanallarda YSA ile debi tahmini
HAYRULLAH UĞRAŞ ÖZTÜRK
Yüksek Lisans
İngilizce
2005
İnşaat MühendisliğiOrta Doğu Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. METİN GER
YRD. DOÇ. DR. ŞAHNAZ TİĞREK
- The behaviour of flow in the immediate vicinity of a sloping rectangular channel with free overfall
Eğimli dikdörtgen bir kanaldaki akımın serbest düşü yakınındaki davranışı
İHSAN KUTLU
Yüksek Lisans
İngilizce
2005
İnşaat MühendisliğiOrta Doğu Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. ŞAHNAZ TİĞREK
PROF. DR. METİN GER