Geri Dön

Airjet iplik üretim makineleri üretim parametrelerinin deney tasarımı ve moora yöntemi ile belirlenmesi: Bir tekstil işletmesi örneği

Experimental design and determination by the moora method: The case of textile management

  1. Tez No: 620834
  2. Yazar: CANSU BATÇIK
  3. Danışmanlar: DR. ÖĞR. ÜYESİ MEVHİBE OYA ÇETİK
  4. Tez Türü: Yüksek Lisans
  5. Konular: Endüstri ve Endüstri Mühendisliği, Industrial and Industrial Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2020
  8. Dil: Türkçe
  9. Üniversite: Çukurova Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Endüstri Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 103

Özet

Tekstilde en sık kullanılan iplik eğirme yöntemlerinden biri Konvansiyel Ring iplik eğirme sistemleridir. Ancak bu sistemin maliyet ve üretim miktarı gibi diğer sistemlere göre dezavantajları bulunmaktadır. Bu dezavantajlar üretici firmaları farklı iplik eğirme yöntemlerine yöneltmiştir. Ring iplik eğirme sistemine alternatif olarak geliştirilen bazı sistemler bulunmaktadır. Bunlar; kompakt ring ipliği , Sirospun ring ipliği ve Duo spun, açık uç-rotor, friksiyon eğirme ve hava jetli eğirme iplik eğirme sistemleridir. Ele alınan çalışmada maliyetlerinin düşük olması ve üretim hızının yüksek olması ve iplikteki yüzey tüylülüğünün mevcut eğirme teknolojilerine göre düşük olması nedeniyle Vortex iplik eğirme makineleri tercih edilmiştir. Bu sistemin avantajlarının yanında çeşitli dezavantajları da bulunmaktadır. Sistemin en büyük dezavantajı ise mukavemet ve tuşedir. Konu ile ilgili önceki çalışmalar incelendiğinde; tekstilde kalite parametrelerinin uygun kombinasyonlarının belirlenmesinde en çok tercih edilen yöntemlerden biri de TAGUCHI yöntemidir. Bu yöntem diğer yöntemlerin aksine çok daha az deneme ile ürünlerin kalitesini arttırarak, kaliteyi geliştirmede üretici firmalara yol göstermektedir. Bu yöntem ile elde edilen veriler varyans analizi yöntemi ile değerlendirilmiştir. Uygulanan TAGUCHI metodunda anlamsız faktör tespit edildiği için, ilgili faktör ile ilgili faktör seviyesi değişikliği yapılarak ÇKKV yöntemlerinden biri olan MOORA yöntemi ile de problem çözülmüştür. Bu çalışmada, SANKO Gaziantep iplik üretim işletmelerinden alınan veriler kullanılarak en uygun makine parametre kombinasyonu seçilmiştir. 30/1 inceliğindeki %100 viskon iplikler için en uygun makine parametre hızı; her iki yöntemle de, 1.2 mm spindle, eco noozle ve 450 m/dk makine hızı olarak seçilmiştir.

Özet (Çeviri)

One of the most commonly used yarn spinning methods in textiles is Convential Ring spinning systems. However, this system has disadvantages compared to other systems such as cost and quantity of production.These disadvantages have led manufacturers to different spinning methods.There are some systems developed as alternatives to the Ring spinning system. These; compact ring yarn, Sirospun ring yarn and Duo spun, open end-rotor, friction spinning and air-jet spinning. In this study, Vortex spinning machines have been preferred because of their low cost and high production speed and low surface hairiness in yarn compared to existing spinning technologies. In addition to the advantages of this system, there are several disadvantages. The biggest disadvantage of the system is strength and touch. The TAGUCHI method is one of the most preferred methods for optimising quality parameters in textiles. This method, unlike other methods, increases the quality of the products with less trials and guides the manufacturer companies in improving the quality. The data obtained with this method were evaluated with the variance analysis method. Since the meaningless factor was detected in the applied TAGUCHI method, the problem level was solved with the MOORA method, which is one of the Multi-Criteria Decision Making Methods, by changing the factor level related to the related factor. In this study, the most suitable machine parameter combination was selected by using the data obtained from SANKO Gaziantep yarn production enterprises. The optimum machine parameter speed for 30/1 thin 100% viscose yarns; Both methods were chosen as 1.2 mm spindle, eco noozle and 450 m / min machine speed.

Benzer Tezler

  1. Hava-jeti ile tekstüre yapan büküm makinesi: Endüstriyel bir prototipinin tasarımı, imalatı ve denemeleri

    Design, manufacturing and processing of an industrial prototype of air-jet texturing and twisting machine

    MEHMET ALPARSLAN KUTLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2009

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. ADNAN DİKİCİOĞLU

  2. Hava jetli iplik eğirme sistemleri ile üretilmiş ipliklerin performanslarının değerlendirilmesi

    Evaluation of yarns performances produced with air-jet spinning systems

    TUĞBA AKKAYA

    Yüksek Lisans

    Türkçe

    Türkçe

    2015

    Tekstil ve Tekstil MühendisliğiErciyes Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    DOÇ. DR. HÜSEYİN GAZİ TÜRKSOY

  3. Vortex ipliklerinin ring ve open end- rotor iplikleri ile karşılaştırıması

    Comparision of vortex yarns with ring yarns and open end-rotor spun yarns

    NAGİHAN KÜÇÜK

    Yüksek Lisans

    Türkçe

    Türkçe

    2009

    Teknik EğitimMarmara Üniversitesi

    Tekstil Eğitimi Ana Bilim Dalı

    DOÇ. DR. SUAT CANOĞLU

  4. Farklı kalınlık ve materyallere sahip vortex iplikler ve özellikleri

    Properties of vortex yarns with different linear densities and materials

    PINAR KARAGÖL ÇAPRAZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Tekstil ve Tekstil MühendisliğiUşak Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    DOÇ. DR. AYŞE EBRU TAYYAR

  5. Murata vortex iplik eğirme sisteminde iplik eğirme düzesinin özelliklerinin ve konstrüksiyon yapısının iplik parametrelerine etkilerinin araştırılması

    Investigation of the effects of nozzle properties and construction on yarn parameters in murata vortex spinning system

    GİZEM KARAKAN GÜNAYDIN

    Doktora

    Türkçe

    Türkçe

    2012

    Tekstil ve Tekstil MühendisliğiSüleyman Demirel Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    PROF. DR. GABİL ABDULLA