Yeşil sentez yöntemiyle çinko nanopartiküllerin mikrosistemlerde üretimi ve karakterizasyonu
Production and characterization of zinc nanoparticles inmicrosystems by green synthesis method
- Tez No: 635429
- Danışmanlar: DR. ÖĞR. ÜYESİ ŞEREF AKAY
- Tez Türü: Yüksek Lisans
- Konular: Biyomühendislik, Bioengineering
- Anahtar Kelimeler: Çinko, Kırmızı lahana, Nanopartikül, Nanoteknoloji, Yeşil sentez, Zing, Red cabbage, Nano particle, Nano tecnology, Green synthesis
- Yıl: 2020
- Dil: Türkçe
- Üniversite: Gümüşhane Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Biyoteknoloji Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 77
Özet
Nanoteknoloji son zamanlarda hızla gelişen bir araştırma alanıdır ve nanopartiküllerin üretimi için biyolojik malzemelerin kullanımını sağlayan yeni bir yöntem olarak görülmektedir. Birçok farklı alan ve amaç için üretilebilen nanopartiküller (NP); nanometreden milimetrenin binde biri kadar değişen boyutlara sahiptirler. Bu küçük partiküller, temas halinde olduğu herhangi bir malzemenin performansını küçük boyutu, yönü, fiziksel özellikleri nedeniyle değiştirebilmektedir. Bu partiküller farklı kimyasal, fiziksel ve biyolojik yaklaşımlarla kolayca hazırlanabilir. Ancak yöntemler arasında biyolojik yaklaşım, basit olması ve çevre dostu koşulları nedeniyle en umut verici yaklaşımdır. Biyolojik yaklaşım ile nanoparçacık üretimi, yüksek sıcaklık, asidik / bazik koşullar ve tehlikeli kimyasallar gerektirmez. Bu nedenle, bu yöntemler“yeşil sentez”olarak adlandırılmaktadır. Bu çalışmada temel amaç mikrosistemler ve yeşil sentez yöntemlerini birleştirilerek metal nanopartiküllerin üretimi ve karakterizasyonu gerçekleştirmektir. Bu amaçla ilk adımda mikrosistemlerin tasarımı ve fabrikasyonu 3B yazıcı destekli soft litografi teknikleri kullanılmıştır. İkinci adımda kırmızı lahana (Brassica oleracea var.capitata f. rubra) ekstrelerinde bulunan flavonoidler ve terpenoidler gibi moleküllerin indirgeyici özellikleri ile çinko nanopartikülleri sentezi gerçekleştirilmiştir. Bitki ekstraktı, Çinko oranı, Çinko çözeltisi derişimi, mikroplatform akış hızları ve akış hızları oranı ve sıcaklık gibi farklı parametreler denenerek en uygun üretim koşulları belirlenmiştir. Elde edilen nanopartiküllerin boyutsal karakterizasyonu sonunda dağıtma fazı olarak Çinko nitratın kullanıldığı ve akış hızları oranın 1:2 olduğu koşullarda en düşük (718 nm) boyutlu ve nispeten homojen partiküller üretilmiştir. Bu koşullar altında üretilen nanopartiküllerin aynı zamanda antimikrobiyal aktivitesine bakılmıştır. Sonuçlar, bitkisel kara lahana bileşenlerin metal nanopartiküllerin yeşil sentez yoluyla üretilebileceğini göstermiştir.
Özet (Çeviri)
Nanotechnology is a rapidly developing field of research recently and has been seen a new method that enables the use of biological materials for the production of nanoparticles. Nanoparticles (NP), which can be produced for many different fields and purposes; are at the size vary from nanometers to a thousandth of a milimeters. These tiny particles can change the performance of any material which they are contacted because of their small size, direction, and physical properties. These particles can be simply prepared by different approaches such as chemical, physical and biological methods. However, the biological approach is the most promising approach among other methods due to simplicity and environmentally friendly conditions. The production of nanoparticle by means of biological approach does not require any high temperature, asidic/basic conditions and hazardous chemicals. Therefore, this method named as“green synthesis”. The main purpose of this study is to produce and characterize metal nanoparticles by combining microsystems and green synthesis methods. For this purpose, in the first step, 3D printer supported soft lithography techniques were used for the design and fabrification of microsystems. In the second step, zinc nanoparticles synthesis was carried out by the reducing effects of molecules such as flavonoids and terpenoids in red cabbage (Brassica oleracea var.capitata f. Rubra) extracts. The synthesis of nanoparticles achieved by trying different parameters such as; extract, Zinc ratio, Zinc solution concentration, flow rates and flow rates ratio in the microplatform and, temperature. At the end of the particle size characterization of the produced nanoparticles, the lowest (718 nm) sized and relatively homogeneous particles were produced under the conditions where Zinc nitrate was used as the dispersing phase and the flow rate ratio was 1:2. The antimicrobial activity of produced nanoparticles under these conditions was also investigated. The results showed that the herbal red cabbage components can be used for by green synthesis of metal nanoparticles. In this study, it was aimed to synthesize zinc nanoparticles by reducing effects of metabolites such as flavonoids and terpenoids found in the extract of the red cabbage (Brassica oleracea var.capitata f. Rubra), which is an endemic medicinal plant.The synthesis of nanoparticles was carried out by trying different parameters such as extract, Zinc ratio, Zinc solution concentration and flow rates and flow rates ratio in the microplatform and temperature. The most suitable production conditions were determined after the structural characterization of obtained nanoparticles. The antimicrobial activity of nanoparticles which is produced atoptimized conditions was also investigated.
Benzer Tezler
- Urtica diocia subsp. dioca L. (ısırgan) bitkisinin etanolik ekstraklarından sentezlenen çinko oksit nanopartiküllerinin karakterizasyonu, antibakteriyel ve antikanserojen etkilerinin IN VITRO ve IN SILIKO yaklaşımları ile incelenmesi.
Characterization of zinc oxide nanoparticles synthesized from ethanolic extracts of Urtica dioica subsp. dioica L. (nettle) and investigation of their antibacterial and anticancer effects through IN VITRO and IN SILICO approaches
EBRU AYDIN
Yüksek Lisans
Türkçe
2025
BiyomühendislikKafkas ÜniversitesiBiyomühendislik Ana Bilim Dalı
DOÇ. DR. GİRAY BUĞRA AKBABA
- ZnO nanopartiküllerin yeşil sentezi ve ilaç taşıyıcı sistem olarak kullanılabilirliğinin araştırılması
Investigation of the usability of green synthesized ZnO nanoparticles as drug carrier system
KAZIM BATTAL
Yüksek Lisans
Türkçe
2023
Biyoteknolojiİnönü ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ EMİR TOSUN
- Deneysel diyabetik rat modelinde, Lepidium latifolium L sulu ekstresi kullanılarak biyosentezlenmiş çinko oksit nanopartiküllerin anti-hiperglisemik aktivitelerinin değerlendirilmesi
Assessment of anti-hyperglycemic activities of biosynthesized zinc oxide nanoparticles using lepidium latifolium l aqueous extract in experimental diabetic rat model
ZAFER KIZILARSLAN
Yüksek Lisans
Türkçe
2025
Veteriner HekimliğiVan Yüzüncü Yıl ÜniversitesiFarmakoloji ve Toksikoloji Ana Bilim Dalı
DOÇ. DR. YILMAZ KOÇAK
- Structural and biofunctional characterization of plant mediated green synthesized metallic nanoparticles
Bitki aracılı yeşil sentez ile üretilen metalik nanopartiküllerin yapısal ve biyofonksiyonel karakterizasyonu
TUĞBA ÖZGÖREN CAN
Doktora
İngilizce
2025
BiyomühendislikMarmara ÜniversitesiBiyomühendislik Ana Bilim Dalı
PROF. DR. AHU ALTINKUT UNCUOĞLU
PROF. DR. YILDIZ AYDIN
- Yeşil sentez ile bakır oksit nanopartiküllerinin sentezi
Synthesis of copper oxide nanoparticles by green synthesis
CANSU SAZAK
Yüksek Lisans
Türkçe
2023
BiyokimyaYıldız Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. MELDA ALTIKATOĞLU YAPAÖZ
DR. ÖĞR. ÜYESİ GÖKAY VARDAR