Numerical study of temperature profile for finned plate with different boundary conditions
Başlık çevirisi mevcut değil.
- Tez No: 665352
- Danışmanlar: DR. RABİA ALTHANİ
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2004
- Dil: İngilizce
- Üniversite: Al Nahrain University
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 89
Özet
Özet yok.
Özet (Çeviri)
Abstract The present study has been carried out to investigate numerical study of temperature profile for finned plate with different boundary conditions. For many practical heat transfer problems it is not possible to obtain a solution by ıneans of analytical techniques. Instead, Solving them requires the use of numerical methods, which in many cases allow such problems to be solved quickly. Often an engineer can easily see the effect of changes in parameter when ınodeling a problem numerically. The numerical techniques used in the present study are based on transient finite difference. An advantage of this method is that it provides a good physical understanding and allows for simple incorporation of modification such as heat source. Explicit method of finite difference is simple and straightforward approach and resulting system of algebraic equations is very easy to sol ve. The transient surface temperature distribution is determined for different types of structures subjected to convection and conduction. The radiation effect is neglected. Taylar series was used to solve the partial differential equation obtained from energy balance. Different types of structures (flat plate, T-element, stiffened structure plate) were taken to find the temperature distribution. The coupling mesh developed in this thesis ın T-element and stiffened structure plate to know the effect of temperature distribution on these structures that may cause a thermal stress and may lead to a fail ure of tbe structure. Computer program (Matlab6. 1) was used to calculate the temperature distribution on these structures. It is found that the variation of thermal conductivity has an effect on the shape of the concaveness of the temperature profile and the global minimum of the curve varied with the increasing of the time increment.
Benzer Tezler
- İğne kanatçıklı-alüminyum köpük birleşik ısı kuyusunun ısıl ve akış davranışının teorik ve deneysel olarak incelenmesi
Theoretical and experimental investigation of the thermal and flow behavior of pin fin-aluminum foam integrated heat sink
YİĞİT SERKAN ŞAHİN
Doktora
Türkçe
2022
EnerjiAtatürk ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. İSMAİL SOLMAZ
- Mini kanallı ısı değiştiricilerinin farklı tasarım parametrelerine göre performansının ve donma probleminin deneysel incelenmesi
Experimental investigation of performance and freezing problems according to different design parameters of mini channel heat exchangers
ENDER GÜL
Yüksek Lisans
Türkçe
2017
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. LÜTFULLAH KUDDUSİ
- Kapalı hacim yalıtımının yüksek sıcaklıklarda ısı geçişi ve enerji tüketimine etkisinin incelenmesi
A study for the effect of enclosure insulation material on heat transfer and energy consumption at high temperatures
EREN DİKEÇ
Yüksek Lisans
Türkçe
2015
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. SEYHAN ONBAŞIOĞLU
- Yamuk kesitli mikro ısı değiştiricilerde nanoakışkanların (Al2O3/water and CuO/SU) akış ve ısı transferinin sayısal analizi
Numerical investigation of flow and heat transfer in trapezoidal cross-sectioned microchannels using (Al2O3/water and CuO/SU) nanofluids
FARAZ KHASTAR
Yüksek Lisans
Türkçe
2016
Makine MühendisliğiGazi ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. OĞUZ TURGUT
- Gemi kargo tanklarında doğal taşınımla olan ısı geçişinin sayısal ve deneysel olarak incelenmesi
Numerical and experimental investigation of natural convection heat transfer in ship cargo tanks
KORAY ŞAHİN
Doktora
Türkçe
2022
Gemi Mühendisliğiİstanbul Teknik ÜniversitesiGemi İnşaatı ve Gemi Makineleri Mühendisliği Ana Bilim Dalı
PROF. DR. SELMA ERGİN