Çok katlı çerçeve-perde sistemlerinde optimum çözüm
Optimum solution in multistorey walled-framed systems
- Tez No: 67032
- Danışmanlar: PROF. DR. TUNCAY EMREM
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Eşdeğer Çerçeve, Bilgisayar Programı, KANİ Metodu, Yapı Modeli
- Yıl: 1996
- Dil: Türkçe
- Üniversite: Sakarya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Yapı Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 112
Özet
ÖZET ÇOK KATLI ÇERÇEVE-PERDE SİSTEMLERDE OPTİMUM ÇÖZÜM
Özet (Çeviri)
SUMMARY Key words : Equivalent Frame, Computer Programme, KANİ Methods, Optimum Structural Model Propose of this work is to apply a calculation model for optimum dimensioning of a multi floor building considering the lateral and vertical forces. The first part is the introduction section, where general information is given about the method. In the second part the whole building is evaluated, where the frames are lined one after the other and tied with infinite hinged bars. The first step of the method is to resolve by transforming the complete structure to equivalent half frames and this simplifying the calculations. In order to obtain definite values the ratios which must be present between the column rigidities are calculated. In this calculation equal rigidity of the building in both lateral and vertical axis (x,y) against the earthquake forces are also achieved. Column dimensions are determined according to vertical forces and rigidity ratios. In the third part lateral earthquake force is first treated in the x direction and equivalent frame is resolved by KANI method and with the given computer program and the values obtained are multiplied by the predominated coefficients and so, the moment values of the all beams and columns of the building are achieved. This calculation is also applied for the y direction. IX
Benzer Tezler
- Boşluklu perdeler içeren çok katlı betonarme yapı sistemlerinin lineer olmayan davranışlarının incelenmesi ve süneklik düzeylerinin belirlenmesi
Non-linear behaviour and ductility level of multistory reinforced concrete structures composed of frames and shear walls with openings
M. ANDAÇ KARACAN
Yüksek Lisans
Türkçe
1999
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. ERKAN ÖZER
- Taşıyıcı sistemleri farklı olan betonarme yapılarda döşeme türlerinin davranışa etkisi
The effects of the slab types to the behaviour of a reinforced concrete building with different structural systems
FATMANA GÜLÇEM YAŞOĞLU
Yüksek Lisans
Türkçe
2015
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. TÜLAY AKSU ÖZKUL
- Tüp taşıyıcı sistemlerin yatay yükler etkisindeki davranışı 60 katlı betonarme tüp sistem bir yapının statik ve dinamik analiz, tasarım ve incelenmesi
Behavior of tubular buildings under lateral loads and the static and dynamic analyses, design and evaluation of a 60-story reinforced concrete building
SERHAN GÜNER
Yüksek Lisans
Türkçe
2004
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ.DR. NECMETTİN GÜNDÜZ
- Probabilistic cost-benefit optimization of viscous and tuned mass dampers in seismic retrofitting of buildings
Yapıların sismik etkilere karşı viskoz ve ayarlı kütle sönümleyiciler ile güçlendirilmesinin olasılıksal fayda-maliyet optimizasyonu
HAKAN KESKİN
Yüksek Lisans
İngilizce
2021
Deprem Mühendisliğiİstanbul Teknik ÜniversitesiDeprem Mühendisliği Ana Bilim Dalı
DOÇ. DR. UFUK YAZGAN
- Taşıyıcı sistem bakımından farklı 2 yapının yatay yükler etkisindeki davranışlarının incelenmesi (10 ve 15 kat için)
Başlık çevirisi yok
HASAN ZAFER YAVUZTÜRK
Yüksek Lisans
Türkçe
1998
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Ana Bilim Dalı
PROF. DR. ZEKİ HASGÜR