Dijital görüntü korelasyonu yöntemi ile gerilme ve yer değiştirmelerin belirlenmesi
Determination of stress and displacement with the digital image correlation method
- Tez No: 676342
- Danışmanlar: DR. ÖĞR. ÜYESİ SELÇUK KAÇIN
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2021
- Dil: Türkçe
- Üniversite: İskenderun Teknik Üniversitesi
- Enstitü: Mühendislik ve Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 105
Özet
Gerilme ve yer değiştirme inşaat mühendisliği laboratuvar uygulamalarında en önemli iki parametredir. Bu parametrelerin belirlenmesinde genellikle mekanik temelli ölçüm teknikleri kullanılmaktadır. Teknolojinin her geçen gün biraz daha ilerlemesiyle mevcut ölçüm tekniklerine alternatif olarak yeni ölçüm teknikleri geliştirilmektedir. Bu tez çalışmasında, inşaat mühendisliği laboratuvar uygulamalarında gerilme ve yer değiştirmelerin belirlenmesinde geleneksel ölçüm tekniklerine alternatif olarak optik temelli bir ölçüm tekniği olan dijital görüntü korelasyonu (DIC) yönteminin kullanılabilirliği araştırılmıştır. Bu amaçla iki farklı boyutta 14 adet kiriş numunesi ve 5 adet duvar numunesi olmak üzere toplamda 19 adet numune üzerinde ölçüm yapılmıştır. Kiriş numunelerinden 7 tanesi donatılı betonarme kiriş olarak, diğer 7 tanesi donatışız olarak üretilmiştir. Kirişlerin beton karışımlarında çeşitli oranlarda (%0; %0,2; %0,4; %0,6) makro sentetik fiber lif (MSF) katkısı kullanılmıştır. Duvar numuneleri tek yüzü veya çift yüzü sıvalı ve sıvada plastik kompozit donatı (geogrid) kullanım durumuna göre çeşitli özelliklerde üretilmiştir. Üretilen kirişler üzerinde üç noktalı eğilme deneyi, duvarlar üzerinde ise diyagonal yükleme deneyi uygulanmış ve numunelerde meydana gelen yer değiştirmeler 1 adet geleneksel deformasyon ölçerle (LVDT- Linear variable differential transformer) ve DIC yöntemiyle ölçüm için yüksek çözünürlüklü dijital kamera ile kaydedilmiştir. LVDT ve DIC ölçümleri ile elde edilen bulgular kıyaslanarak inşaat mühendisliği laboratuvar uygulamalarında yer değiştirmelerin ölçümü için DIC yönteminin kullanılabilirliği araştırılmıştır. Ayrıca yükleme deneyleri sırasında numunelerin yüzeyinde meydana gelen gerilme değişimleri DIC yöntemiyle görselleştirilmiştir. Numune yüzeylerinde oluşan çatlakların gelişimi görsel olarak analiz edilmiştir. DIC ve LVDT ölçüm sonuçları değerlendirildiğinde, her iki yöntemle elde edilen yer değiştirme değerlerinin birbiriyle uyum içerisinde olduğu tespit edilmiştir. Numune yüzeylerinde meydana gelen gerilme değişimlerinin görselleştirilmesinde DIC yönteminin kullanılabileceği ortaya koyulmuştur.
Özet (Çeviri)
Stress and displacement are the two most important parameters in civil engineering laboratory applications. Mechanical-based measurement techniques are generally used to determine these parameters. With the advancement of technology every day, new measurement techniques are being developed as an alternative to existing measurement techniques. In this thesis, the use of digital image correlation (DIC) method, which is an optically based measurement technique, as an alternative to traditional measurement techniques in determining stress and displacement in civil engineering laboratory applications was investigated. For this purpose, measurements were made on a total of 19 samples, 14 beam samples in two different sizes and 5 wall samples. 7 of the beam samples were produced as reinforced concrete beams, while the other 7 were produced as unreinforced. Macro synthetic fiber (MSF) additives were used in various proportions (0%; 0.2%; 0.4%; 0.6%) in the concrete mixtures of the beams. The wall samples are plastered on one side or both sides and plastic composite reinforcement (geogrid) in plaster has been produced in various properties according to the usage situation. A three-point bending test was applied on the produced beams and a diagonal loading test on the walls, and the displacements in the samples were recorded with a conventional deformation meter (LVDT-Linear variable differential transformer) and a high resolution digital camera for measurement by DIC method. By comparing the findings obtained with LVDT and DIC measurements, the usability of the DIC method for the measurement of displacements in civil engineering laboratory applications was investigated. In addition, the stress changes occurring on the surface of the samples during the loading tests were visualized by DIC method. The development of cracks on the sample surfaces was analyzed visually. When the DIC and LVDT measurement results were evaluated, it was found that the displacement values obtained by both methods were in harmony with each other. It has been demonstrated that the DIC method can be used to visualize the stress changes occurring on the sample surfaces.
Benzer Tezler
- Understanding failure mechanisms in hybrid fiber reinforced laminates through the combined usage of DIC, AE, thermography and optic based systems
Başlık çevirisi yok
ISA EMAMI TABRIZI
Doktora
İngilizce
2020
Mühendislik BilimleriSabancı ÜniversitesiMalzeme Bilimi ve Nanoteknoloji Ana Bilim Dalı
Prof. Dr. MEHMET YILDIZ
DR. ÖĞR. ÜYESİ ADNAN KEFAL
- Katmanlı kompozit bir plağın üniform basınç yükü altındaki geometrik doğrusal olmayan davranışının deneysel ve sayısal olarak incelenmesi
Experimental and numerical investigation of nonlinear static behaviour of a laminated composite plate subjected to uniform pressure load
KEMAL GÜNDOĞAN
Yüksek Lisans
Türkçe
2013
Uçak Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. ZAHİT MECİTOĞLU
- Yüksek performanslı betonlarda lif oranı ve kesme açısının betonun mod II kesme davranışına etkisi
Effect of volume fraction of fiber and shear plane on the mod II shear behavior of high-performance concrete
YOUSRA ABDULKAREEM MUSTAFA MUSTAFA
Yüksek Lisans
Türkçe
2023
İnşaat MühendisliğiGazi Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. ABDUSSAMET ARSLAN
- Failure investigation of composite materials using multi-instrument experimental techniques and numerical method
Çok aletli deney teknikleri ve nümerik yöntemi kullanılarak kompozit malzemelerin kırılmalarının araştırılması
RAJA MUHAMMAD AWAIS KHAN
Doktora
İngilizce
2021
Mühendislik BilimleriSabancı ÜniversitesiMalzeme Bilimi ve Nanomühendislik Ana Bilim Dalı
Prof. Dr. MEHMET YILDIZ
- Characterisation of failure in composite materials with acoustic emission and correlation with micromechanics
Kompozit malzemelerde hasarın akustik emisyon ile belirlenmesi ve mikromekanik ile ilişkilendirilmesi
FATİH ERTUĞRUL ÖZ
Doktora
İngilizce
2018
Makine MühendisliğiBoğaziçi ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. NURİ BÜLENT ERSOY