Geri Dön

Adyabatik motorlarının performanslarının incelenmesi

Başlık çevirisi mevcut değil.

  1. Tez No: 67764
  2. Yazar: AHMET DAĞDAŞ
  3. Danışmanlar: PROF. DR. ORHAN DENİZ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1997
  8. Dil: Türkçe
  9. Üniversite: Yıldız Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Enerji Makineleri Bilim Dalı
  13. Sayfa Sayısı: 115

Özet

ABSTRACT Recently great expectations were put into the insulation of combustion chamber walls. A considerable reduction m fuel consumption, a marked reduction of the heat flow to the cooling water, and a significant increase of exhaust energy were predicted. In the meantime, there exist an increasing number of publications reporting on significant increase of fuel consumption with total or partial insulation of the combustion chamber walls. In this study, after the information about adiabatic engines were presented and the heat transfer of those engines were researched. Resent experimental results are reported that confirm the effects, including the influence of the heat transfer coefficient which depends on the wall temperature, on the performance of engines. Measurements of instantaneous surface tempeatures and instantaneous heat flux flowing into wall surfaces of pistons of a 4-stroke gasoline engine and a 4-stroke direct injection diesel engine have been made possible by forming ceramic combustion walls and using thin film thermocouples developed by the authors. Thus, effects of heat transfer on engine performance were obtained -V-

Özet (Çeviri)

ABSTRACT Recently great expectations were put into the insulation of combustion chamber walls. A considerable reduction m fuel consumption, a marked reduction of the heat flow to the cooling water, and a significant increase of exhaust energy were predicted. In the meantime, there exist an increasing number of publications reporting on significant increase of fuel consumption with total or partial insulation of the combustion chamber walls. In this study, after the information about adiabatic engines were presented and the heat transfer of those engines were researched. Resent experimental results are reported that confirm the effects, including the influence of the heat transfer coefficient which depends on the wall temperature, on the performance of engines. Measurements of instantaneous surface tempeatures and instantaneous heat flux flowing into wall surfaces of pistons of a 4-stroke gasoline engine and a 4-stroke direct injection diesel engine have been made possible by forming ceramic combustion walls and using thin film thermocouples developed by the authors. Thus, effects of heat transfer on engine performance were obtained -V-

Benzer Tezler

  1. Havayla çalışan bir roket motoruyla taşıt tahriğinin incelenmesi

    The Investigation of an air breathing rocket engine powered vehicle

    MEHMET MERT ARICAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2003

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Otomotiv Ana Bilim Dalı

    PROF. DR. H. ERTUĞRUL ARSLAN

  2. Dönel detonasyon motorlarında eşlenik ısı transferi analizi

    Conjugate heat transfer analysis of rotating detonation combustors

    ÜMİT YELKEN

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Havacılık Mühendisliğiİstanbul Teknik Üniversitesi

    Uçak ve Uzay Mühendisliği Ana Bilim Dalı

    PROF. DR. ONUR TUNÇER

    DR. BAYINDIR HÜSEYİN SARACOĞLU

  3. LPG ve benzinle çalışan otto motorlarının emisyon ve performans bakımından incelenmesi

    Comparison of emissions and performance of otto engines working with LPG and gasoline

    YUSUF YAĞMUR ÇEVİK

    Yüksek Lisans

    Türkçe

    Türkçe

    1999

    Makine MühendisliğiUludağ Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. ALİ SÜRMEN

  4. A mathematical model for prediction of film cooling performance in liquid propellant rocket engines

    Sıvı yakıtlı roket motorlarında film soğutma performansının tahmini için matematiksel bir model

    AKIN SÖZERİ

    Yüksek Lisans

    İngilizce

    İngilizce

    2023

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. SEYHAN ONBAŞIOĞLU

  5. Türboşarj dizel motorlarında adyabatik piston ve performansa etkisinin incelenmesi

    Adiabatic piston and its effects on the turbocharged diesel engine performance

    İSMET ÇELİKTEN

    Yüksek Lisans

    Türkçe

    Türkçe

    1987

    Makine MühendisliğiGazi Üniversitesi

    Makine Eğitimi Ana Bilim Dalı

    YRD. DOÇ. DR. ALİ YÜCEL UYAREL