Farklı oranlardaki titanyum dioksit nanotüplerin bulk fill kompozitin mekanik ve antibakteriyel özellikleri üzerine etkisi
Effect of different ratios of titanium dioxide nanotubes on the mechanical and antibacterial properties of the bulk fill composite
- Tez No: 687138
- Danışmanlar: PROF. DR. EVRİM DALKILIÇ
- Tez Türü: Diş Hekimliği Uzmanlık
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: nanotüp, akışkan bulk fill kompozit rezin, antibakteriyel ajan, S.mutans, L.casei, üç nokta eğme dayanımı, mikrosertlik, yüzey pürüzlülüğü, Antienfektif ajanlar, Dental materyaller, Dental stres analizi, Kompozit malzemeler, Kompozit reçineler, Mekanik davranış, Streptococcus mutans, Titanyum dioksit, nanotube, flowable bulk fill composite resin, antibacterial agent, S.mutans, L.casei, three point bending strength, microhardness, surface roughness, Anti infective agents, Dental materials, Dental stress analysis, Composite materials, Composite resins, Mechanical behavior, Streptococcus mutans, Titanium dioxide
- Yıl: 2020
- Dil: Türkçe
- Üniversite: Bezm-İ Alem Vakıf Üniversitesi
- Enstitü: Diş Hekimliği Fakültesi
- Ana Bilim Dalı: Restoratif Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Restoratif Diş Tedavisi Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
Amaç: Bu tez çalışmasının amacı; farklı oranlarda titanyum dioksit nanotüp eklenmesinin akışkan bulk fill kompozit rezinin, mekanik ve antibakteriyel özellikleri üzerine etkisinin in vitro laboratuvar şartları altında değerlendirilmesidir. Gereç ve Yöntem: Titanyum dioksit nanotüpler, laboratuvar koşullarında hidrotermal yöntemle sentezlendi. Nanotüplerin karakterizasyonu; SEM (Taramalı Elektron Mikroskobu), FTIR (Fourier Dönüşümlü Kızılötesi Spektroskopisi) ve Raman Spektroskopisi kullanılarak değerlendirildi. Akışkan bir bulk fill rezin olan Estelite Bulk Fill Flow'un içerisine; farklı oranlarda (%0,1, %0,5, %1) TiO2 nanotüp eklendi. Kontrol grubuna TiO2 nanotüp eklenmeyerek dört farklı grup oluşturuldu. Akışkan bulk fill kompozitin mekanik özelliklerini değerlendirmek amacıyla; Vicker's mikrosertliği, yüzey pürüzlülüğü, eğme dayanımı gibi testler uygulandı. Eğme dayanımı değerlendirilmesinde, kompozit rezinin kırılan yüzeyleri SEM ile incelendi. Ayrıca nanotüp ilavesinin S.mutans ve L.casei bakterilerine antibakteriyel etkinliğinin değerlendirilmesi, direkt kontakt test uygulanarak yapıldı. Çalışmada elde edilen bulgular değerlendirilirken, istatistiksel analizler için IBM SPSS Statistics 22 (IBM SPSS, Türkiye) programı kullanıldı. Ayrıca Mann Whitney U Testi, Shapiro Wilks, Kruskal Wallis testi, Dunn's testi, Friedman Testi ve Wilcoxon işaret testi kullanıldı ve anlamlılık p<0.05 düzeyinde değerlendirildi. Bulgular: Mekanik testlerin sonuçları değerlendirildiğinde; TiO2 nanotüp eklenmesinin kompozitlerin yüzeyinde hem polisaj öncesi hem de polisaj sonrasında pürüzlülükte değişim yaratmadığı, hem polisaj öncesi hem de polisaj sonrasında kompozit rezin içine %0.5 ve %1 TiO2 nanotüp eklemenin kompozitin mikrosertlik değerlerini arttırdığı, kompozitin alt yüzeylerinde değişim yaratmadığı (p>0.05), kompozit rezinlere polisaj uygulaması sonucunda, bütün gruplarda hem pürüzlülük hem de mikrosertlik değerlerinde artış gözlendiği (p<0.05), titanyum eklenmesinin eğme dayanımında değişiklik meydana getirmediği gözlendi (p>0.05). Antibakteriyel sonuçlar değerlendirildiğinde ise titanyum dioksit nanotüp eklenmesi, akışkan bulk fill kompozit rezinin S.mutans bakterisine karşı, antibakteriyel etki kazandırmadı (p>0.05). L.casei bakterisi içinse; %0.5 TiO2 nanotüp içeren grupta antibakteriyel etkinlik gözlendi (p<0.05). Sonuçlar: Titanyum dioksit nanotüp eklenmesi, akışkan bulk fill kompozit rezinin mekanik özelliklerinde olumsuz etki yaratmadan, üst yüzey mikrosertlik değerinde artış sağladı. Akışkan bulk fill kompozit rezinin L.casei bakterisine karşı antibakteriyel etkinlik elde edildi.
Özet (Çeviri)
Aim: The purpose of this thesis is; evaluation of the effect of adding titanium dioxide nanotubes in different proportions on the mechanical and antibacterial properties of fluid bulk fill composite resin under in vitro laboratory conditions. Material and Method: Titanium dioxide nanotubes were synthesized by the hydrothermal method under laboratory conditions. Characterization of nanotubes; SEM (Scanning Electron Microscopy), FTIR (Fourier Transform Infrared Spectroscopy) and Raman Spectroscopy. In Estelite Bulk Fill Flow, a fluid bulk fill resin; TiO2 nanotube was added in different proportions (0.1%, 0.5%, 1%). Four different groups were formed by not adding TiO2 nanotubes to the control group. In order to evaluate the mechanical properties of fluid bulk fill composite; tests such as Vicker's microhardness, surface roughness, bending strength were applied. In the evaluation of bending strength, the fractured surfaces of the composite resin were examined with SEM. In addition, evaluation of the antibacterial effectiveness of nanotube addition against S.mutans and L.casei bacteria was performed by applying direct contact test. When evaluating the findings obtained in the study, IBM SPSS Statistics 22 (IBM SPSS, Turkey) program is used. In addition, Mann Whitney U Test, Shapiro Wilks, Kruskal Wallis test, Dunn's test, Friedman Test and Wilcoxon sign test and significance was evaluated according to p <0.05. Results: The results of the mechanical tests are evaluated; Addition of TiO2 nanotube does not change the roughness of the surface of composites both before and after polishing, adding 0.5% and 1% TiO2 nanotube to the composite resin both before and after polishing increases the microhardness of the composite, creating creation on the sub-surfaces of the composite (p> 0.05), It was observed that both the roughness and microhardness values increased in all groups with the polishing application on the resins (p <0.05), and the addition of titanium dioxide nanotube did not cause any change in bending strength (p> 0.05). If the antibacterial results were evaluated, the addition of titanium dioxide nanotube did not give the fluid bulk fill composite resin an antibacterial effect against S.mutans bacteria (p> 0.05). For L. casei bacteria; Antibacterial efficacy was observed in the group containing 0.5% TiO2 nanotube (p <0.05). Conclusion: The addition of titanium dioxide nanotubes provided an increase in the upper surface microhardness value without negatively affecting the mechanical properties of the fluid bulk fill composite resin. Antibacterial activity was obtained against L.casei bacteria of the fluid bulk fill composite resin.
Benzer Tezler
- Investigation of the catalytic performance of tin nanowires produced by aluminum anodic oxide template method for electrochemical CO2 reduction
Alüminyum anodik oksit şablon yöntemiyle üretilen kalay nanotellerin elektrokimyasal CO2 redüksiyonuna yönelik katalitik performansinin i̇ncelenmesi
DİLAN ER GÖNÜL
Doktora
İngilizce
2023
Mühendislik Bilimleriİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA KAMİL ÜRGEN
- Nanokompozit yapılı lif tasarımı ve geliştirilmesi
Design and development of nanocomposite fibers
NURAY KIZILDAĞ
Doktora
Türkçe
2017
Tekstil ve Tekstil Mühendisliğiİstanbul Teknik ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
PROF. DR. NURAY UÇAR
- Farklı erime akış indeksine sahip polipropilen esaslı ahşap polimer kompozitlerin özelliklerinin belirlenmesi
Determining the properties of the polypropylene based wood-polymer composites with different melt flow index
VEDAT ÇAVUŞ
Doktora
Türkçe
2017
Ormancılık ve Orman MühendisliğiKahramanmaraş Sütçü İmam ÜniversitesiOrman Endüstri Mühendisliği Ana Bilim Dalı
PROF. DR. FATİH MENGELOĞLU
- Biyodizel-bütanol-dizel karışımlarına hidrojen ve titanyum dioksit ilavesinin performans ve emisyon parametrelerine etkilerinin araştırılması
Investigation of the effects of hydrogen and titanium dioxide addition on the performance and emission parameters of biodiesel-butanol-diesel blends
SELÇUK SARIKOÇ
Doktora
Türkçe
2019
Makine MühendisliğiErciyes ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. SEBAHATTİN ÜNALAN
- Design, characterization,and performance tests of nanofibrous filter for removal of volatile organic compounds (VOCs) by photocatalytic oxidation (PCO) for aircraft cabin air filtration applications
Uçak kabini içerisindeki uçucu organik bileşiklerin fotokatalitik oksidasyon yöntemi ile giderilmesi amacıyla nano fibroz yapılı filtrelerin üretimi, karakterizasyonu ve filtrelerin performans testleri
ARDA KÜÇÜKSARI
Yüksek Lisans
İngilizce
2015
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. HÜLYA CEBECİ
YRD. DOÇ. DR. ALİ KILIÇ