Geri Dön

Silis dumanı katkılı uçucu kül ile üretilen alkali aktive edilmiş harçların farklı sülfatlar altındaki fiziksel ve mekanik özelliklerinin incelenmesi

İnvestigation of phsical and mechanical properties of alkali aktivated mortars produced with silica fume additive fly ash under the effect of different sulphates

  1. Tez No: 706050
  2. Yazar: HAYDAR KOÇ
  3. Danışmanlar: DR. ÖĞR. ÜYESİ MEHMET KAYA
  4. Tez Türü: Yüksek Lisans
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2021
  8. Dil: Türkçe
  9. Üniversite: Yozgat Bozok Üniversitesi
  10. Enstitü: Lisansüstü Eğitim Enstitüsü
  11. Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 106

Özet

Bu çalışmada sabit oranda potasyum hidroksit (KOH) ve sodyum hidroksit (NaOH) ile 3 farklı oranda silis dumanı katkısıyla üretilen, C sınıfı uçucu küllü geopolimer harçların fiziksel ve mekanik özellikleri araştırılmıştır. Çimento mikserinde karıştırılan harç numuneler 40×40×160 mm boyutlarındaki standart kalıplara yerleştirilmiştir. Daha sonra 100 ºC sıcaklıktaki etüvde 24 saat süreyle bekletilmiştir. Etüvden çıkan numuneler kalıptan söküldükten sonra oda sıcaklığında 28 gün bekletilmiş, daha sonra fiziksel ve mekanik özellikleri incelenmiştir. Numuneler sodyum sülfat (Na2SO4) ve magnezyum sülfat (MgSO4) çözeltisi içerisine konulmuştur. Numunelerin 30 gün, 90 gün ve 180 gün süresince boy ve ağırlık değişimleri ile eğilme ve basınç dayanımları ölçülmüştür. Deneyler sonucunda NaOH ile aktive edilerek üretilmiş numunelerin yüksek oranda dayanım kaybetmedikleri, KOH ile aktive edilerek üretilen ve sülfat etkisindeki numunelerin ise 30. günde basınç dayanımlarının arttığı gözlenmiştir. Na2SO4 etkisindeki numunelerin 30.günde basınç dayanımı 75,14 MPa'a MgSO4 etkisindeki numunelerin ise 64,31 MPa'a ulaştığı belirlenmiştir. Genel olarak üretilen numunelerin sülfat etkisi altında dayanıklı olduğu tespit edilmiştir. Silis dumanı katkısı ile üretilen uçucu kül tabanlı alkali aktive edilmiş harçların prefabrik yapı malzemesi üretiminde kullanılabileceği düşünülmektedir.

Özet (Çeviri)

In this study, the physical and mechanical properties of C class fly ash geopolymer mortars produced with constant potassium hydroxide (KOH) and sodium hydroxide (NaOH) and silica fume additives at 3 different rates were investigated. The mortar samples mixed in the cement mixer were placed in standard molds measuring 40×40×160 mm. Then it was kept in an oven at 100 ºC for 24 hours. After the samples removed from the oven were removed from the mold, they were kept at room temperature for 28 days, and then their physical and mechanical properties were examined. The samples were placed in sodium sulfate (Na2SO4) and magnesium sulfate (MgSO4) solution. Height and weight changes, flexural and compressive strengths of the samples were measured during 30 days, 90 days and 180 days. As a result of the experiments, it was observed that the samples produced by activating with NaOH did not lose excessive strength, while the compressive strength of the samples produced by activating with KOH and under the influence of sulfate increased on the 30th day. It was determined that the compressive strength of the samples under the influence of Na2SO4 reached 75.14 MPa on the 30th day, and the samples under the influence of MgSO4 reached 64.31 MPa. In general, it has been determined that the produced samples are durable under the effect of sulfate. It is thought that fly ash based alkali activated mortars produced with silica fume additive can be used in the production of prefabricated building materials.

Benzer Tezler

  1. Çimento esaslı kompozit plakalarla güçlendirilmiş bölme duvarlarının kayma dayanımının belirlenmesi

    Determination of shear strength of infill walls strengthened by cement based composite plates

    MUSTAFA GÜR

    Yüksek Lisans

    Türkçe

    Türkçe

    2017

    Deprem Mühendisliğiİstanbul Teknik Üniversitesi

    Deprem Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MUSTAFA GENÇOĞLU

  2. Farklı tip agregaların silis dumanı katkılı uçucu kül ile üretilen geopolimer harçlarda yüksek sıcaklık direnci üzerine etkisi

    The effect of different type aggregates on high temperature resistance in fly ash geopolymer mortars produced with silica fume additive

    HALİS KILINÇASLAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    İnşaat MühendisliğiYozgat Bozok Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ MEHMET KAYA

  3. Beton bileşim parametrelerinin geçirimlilik özellikleri ve gömülü çelik donatı korozyonuna etkisi

    Effect of mixing parameters on permeability properties of concrete and corrosion of embedded steel rebar

    ÜNAL ANIL DOĞAN

    Doktora

    Türkçe

    Türkçe

    2008

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. HULUSİ ÖZKUL

  4. Mineral katkılı kendiliğinden yerleşen harçların dayanım özelliklerine kür şartlarının etkisi

    Effect of curing conditions on the strength properties of mineral compounded self-compacting mortar

    YAKUP BAKIR

    Yüksek Lisans

    Türkçe

    Türkçe

    2014

    İnşaat MühendisliğiFırat Üniversitesi

    Yapı Ana Bilim Dalı

    YRD. DOÇ. DR. MEHMET KARATAŞ