Improving steel stockyard planning by couplingoptimization with stochastic simulation
Başlık çevirisi mevcut değil.
- Tez No: 707051
- Danışmanlar: DR. REMİGİUSZ IWANKOWİCZ
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2016
- Dil: İngilizce
- Üniversite: Unıversıte de Lıege
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
Ship building involves complicated production processes in a highly competitive environment. Therefore improving and obtaining more efficient production facilities is getting more and more important. This fact results in the increase of usage of simulation and optimization tools in the industry. However, coupling these two fields of applications is still not common. This paper proposes a new application by coupling two commercial tools present in the market, QUEST by Delmia for Discrete Event Simulation (DES) and MODEFRONTIER for optimization in a case of improving a steel stockyard in a shipyard. A multi-objective optimization is carried out by taking three design variables and aiming to optimize the objective functions. Number of steel plate piles in stockyard, steel plate capacity of each pile and frequency of steel plate arrival to shipyard are selected as design variables. The objectives are minimizing the area used for stocking and minimizing the Work In Progress (WIP). It is suggested that shipyards with different steel processing capacities would require different sizes of stockyards and different frequencies of incoming steel plates. Therefore a layout plan should be made based on running optimization tasks. The findings provide that production cost can be reduced by carrying out proper planning. The fundamental knowledge of coupling optimization and stochastic simulation tools may result in significant reduction of production costs by minimizing storing area and work in progress. The new solution is also valid for other fields of ship building such as block erection or steel processing and may be modified for further applications.
Benzer Tezler
- Improving strength of rail steel and investigation of main mechanical and microstructural properties
Ray çeliği mukavemetini geliştirmek ve ana mekanik ve mikroyapı özelliklerinin incelemesi
ABDULKADİR KILIÇ
Yüksek Lisans
İngilizce
2021
Makine MühendisliğiAnkara Yıldırım Beyazıt ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ YASİN SARIKAVAK
- Improving the ductility properties of lightweight concrete by steel fiber addition
Hafif betonların süneklik özelliklerinin çelik lif eklenerek artırılması
SÜLEYMAN İPEK
Yüksek Lisans
İngilizce
2013
İnşaat MühendisliğiGaziantep Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. ERHAN GÜNEYİSİ
- Improving lateral deformation behavior of high rise steel structures under dynamic loadings
Yüksek katlı çelik yapıların dinamik yükler altında yanal deformasyon davranışlarının iyileştirilmesi
MUSTAFA RASHİD
Yüksek Lisans
İngilizce
2015
İnşaat MühendisliğiGaziantep Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
Assist. Prof. Dr. TALHA EKMEKYAPAR
- Improving mechanical properties of cardan shafts manufactured from AISI 4140 steel materials
AISI 4140 çelik malzemelerden üretilen kardan şaftlarının mekanik özelliklerinin geliştirlmesi
HASAN YEŞİLYURT
Yüksek Lisans
İngilizce
2016
Makine MühendisliğiMelikşah ÜniversitesiMalzeme Bilimi ve Makine Mühendisliği Ana Bilim Dalı
PROF. DR. MEHMET HALİDUN KELEŞTEMUR
- Improving the ductility and toughness behavior of concrete filled steel tube columns
İçi beton doldurulmuş çelik tüp kolonların süneklik ve tokluk davranışlarının iyileştirilmesi
ALI KHALAF DAHAM DAHAM
Yüksek Lisans
İngilizce
2018
İnşaat MühendisliğiGaziantep Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. TALHA EKMEKYAPAR