A methodology study of theevolution of the secondary brassmaking process when adding ofnon-metallic inclusions
Başlık çevirisi mevcut değil.
- Tez No: 707189
- Danışmanlar: Belirtilmemiş.
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2016
- Dil: İngilizce
- Üniversite: Kth-Kunglıga Teknıska Hogskolan (royal Instıtute Of Technology)
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
Previously most of the research focusing on non-metallic inclusions additions have focused on Fealloys. The presence of inclusions has a great effect on the material properties of Fe-alloy. Brass (Cu-Zn) is a germicidal material which has been widely used for especially drinking water applications. However, the influence of non-metallic inclusions on the material properties in brass have only been studied to a limited degree by other researchers. The secondary brass-making process is not a common process compared to the secondary steelmaking process. The process of secondary metal making (re-melting) has several purposes such as to improve the cleanliness, deoxidation, microstructure, composition etc. The secondary brass making process is performed to improve mechanical and chemical properties of brass. The present work presents a precursory methodology research on the influence of the non-metallic inclusions on liquid Cu-alloys for the brass grade (CuZn38). The vague effect of the secondary brass-making technic for CuZn38 eco-brass research is estimated based on thermodynamic considerations. During a secondary brass-making process, the effects of the primary addition of the raw Al2O3 powder formation in molten brass has been studied by using a by specific quartz tube suction technique. The present work studied influence of the addition of raw Al2O3 powder in brass based on quartz tube samples and ingot samples. The used Al2O3 inclusions and deoxidizer in brass show that a similar characterization can be found as when secondary Al2O3 inclusions are present in steel-making. The results showed that the Al2O3 particles in brass had different morphologies. Specifically, Al2O3 reacts with ZnO under the formation of ZnAl2O4 spinel oxide particles. Also, spinel oxide particles form plate-like or spherical morphology particles.
Benzer Tezler
- A comparative analytical study of the form of minaret in contemporary mosque architecture
Çağdaş cami mimarisinde minarenin formunun karşılaştırmalı bir analitik çalışma
MUSTAFA RAFEA TAHER TAHER
Yüksek Lisans
İngilizce
2018
MimarlıkBahçeşehir ÜniversitesiMimarlık Ana Bilim Dalı
DOÇ. DR. MURAT DÜNDAR
- Chinese exceptionalism: A conceptual approach to the peaceful rise of China
Çin istisnacılığı: Çin'in barışçıl yükselişine kavramsal bir yaklaşım
ESRA EYMEN CANSU
Yüksek Lisans
İngilizce
2023
Uluslararası İlişkilerAnkara Sosyal Bilimler ÜniversitesiUluslararası İlişkiler Ana Bilim Dalı
PROF. DR. MURAT YEŞİLTAŞ
- The dilemma of U.S. foreign policy during the Arab Spring: From moralpolitik to realpolitik
Arap Baharı süresince Amerikan dış politikasının ikilemi: 'Moralpolitik'ten 'realpolitik'e
CAN DONDURAN
Doktora
İngilizce
2021
Uluslararası İlişkilerGalatasaray ÜniversitesiUluslararası İlişkiler Ana Bilim Dalı
PROF. DR. A. FÜSUN TÜRKMEN
- Geography of social networks: The case of creative industries in Tomtom Neighborhood
Sosyal ağların coğrafyası: Tomtom Mahallesi'ndeki yaratıcı endüstriler örneği
ÖZLEM TEPELİ TÜREL
Doktora
İngilizce
2023
Şehircilik ve Bölge Planlamaİstanbul Teknik ÜniversitesiŞehir ve Bölge Planlama Ana Bilim Dalı
DOÇ. DR. BAŞAK DEMİREŞ ÖZKUL
PROF. DR. SİLVİA MUGNANO
- The waterfront regeneration projects and contemporary design approaches of European port cities
Avrupa liman şehirlerinde kıyı yenileme projeleri ve güncel mimarlık yaklaşımları
FATMA TANIŞ
Yüksek Lisans
İngilizce
2015
Mimarlıkİstanbul Teknik ÜniversitesiMimarlık Tarihi Ana Bilim Dalı
DOÇ. DR. FATMA ERKÖK