Geri Dön

Bitlis pomzası ve Ahlat taşı karışımının Yalıtım malzemesi olarak kullanılabilirliğinin Araştırılması

Bitlis pumice and Ahlat stone mixture as insulation material research of usability

  1. Tez No: 714715
  2. Yazar: MELEK ERDEM
  3. Danışmanlar: PROF. DR. ZEKİ ARGUNHAN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Mühendislik Bilimleri, Engineering Sciences
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2022
  8. Dil: Türkçe
  9. Üniversite: Bitlis Eren Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 80

Özet

Bu çalışmada Bitlis yöresinden alınan pomza malzeme ve Ahlat Taşı karışımları 0,5 mm 2 mm ve 4 mm olmak üzere üç farklı tane boyutunda karıştırılarak hazırlanmıştır. Ayrıca pomza ve Ahlat Taşı kendilerine saf özellikleriyle karışım yapılmadan da deneye tabii tutulmuştur. Deney örnekleri Bitlis Pomzası ve Ahlat Taşı karıştırılıp on beş farklı karışımda hazırlanmıştır. Karışımların tümünde bağlayıcı olarak (PÇK 52,5 R) çimentosu kullanılmıştır. Numunelere 7 günlük su kürü uygulanıp, kurutulup güçlendirmeye hazır hale geldikten sonra deneylere tabi tutulmuştur. Numunelere uygulanacak testler cihaz kapasitesine göre ısıl iletkenlik katsayısını ölçmek için 5x5x5x cm kalıplarda, basınç dayanımı, kapilar su emme deneyi üç noktada eğilmede çekme deneyi için ise 4x4x16 cm kalıplarda hazırlanmıştır. Ayrıca saf pomza ve saf Ahlat Taşı aynı kalıp boyutlarında aynı testlere tabii tutulmuştur. Karışımlarda çimento oranı sabit tutulup kullanılan malzemenin gözenekli yapısına göre farklılık gösterdiği için karışımlarda su oranı farklı kullanılmıştır. Numuneler 24 saat sonra kalıplardan çıkarılmıştır. Örneklerin ısıl iletkenlik, basınç dayanımı, kapilar su emme deneyi, eğilmede çekme dayanımı, ultrasonik ses geçiş hızı testi, porozite ve su emme deneyleri yapılmıştır.

Özet (Çeviri)

In this study, pumice material and Ahlat stone mixtures taken from Bitlis region were prepared by mixing in three different grain sizes as 0.5 mm, 2 mm and 4 mm. In addition, pumice and pear stone, with their unique properties, were tested without mixing. Experimental samples were prepared in fifteen different mixtures by mixing Bitlis pumice and Ahlat stone (PÇK 52,5 R) was used as a binder in all of the mixtures. After 7 days of water curing was applied to the samples, they were dried and ready for strengthening, they were subjected to experiments. The tests to be applied to the samples were prepared in 5x5x5 cm molds to measure the thermal conductivity coefficient according to the device capacity, and in 4x4x16 cm molds for the compressive strength, capillary water absorption test and the tensile test in bending at three points. In addition, pure pumice and pure Ahlat stone were subjected to the same test in the same mold dimensions. Since the cement ratio in the mixtures is kept constant and differs according to the porous structure of the material used, the water ratio is used differently in the mixtures. The samples were removed from the molds after 24 Hours. Thermal conductivity, compressive strength, capillary water absorption test, tensile strength in bending ,ultrasonic sound transmission velocity test porosity and water absorption tests were carried out.

Benzer Tezler

  1. Bitlis Ahlat pomzası ile üretilen hafif betonların mekanik özelliklerinin incelenmesi

    Investigation of mechanical properties of light concretes produced Bitlis Ahlat pumice

    CUMA DEMİRTAŞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    İnşaat MühendisliğiFırat Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ CEVDET EMİN EKİNCİ

  2. Pomza ve perlit kullanılarak üretilen kompozit hafif beton tasarımı ve özelliklerinin incelenmesi

    The design and examining properties of lightweight composite lightweight concrete that produced with pumice and perlite

    MELİK BAKIRHAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    İnşaat MühendisliğiBitlis Eren Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ NUSRET BOZKURT

  3. Bitlis pomzası, Bitlis volkanik tüfü, Afşin-Elbistan uçucu külü ve kirecin yüksek plastisiteli kile olan etkisi

    The effect of Bitlis pumice, Bitlis volcanik tuff, Afşin-Elbistan fly ash and lime on high plasticity clay

    ERHAN KELEŞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    İnşaat MühendisliğiSüleyman Demirel Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ ÖMÜR ÇİMEN

  4. Bitlis pomzası ile kendiliğinden yerleşen hafif beton tasarımı ve özelliklerinin araştırılması

    The desing of self compacting lightweight concrete produced with bi̇tli̇s pumice and investigation of its properties

    VURAL TAŞKIN

    Yüksek Lisans

    Türkçe

    Türkçe

    2016

    İnşaat MühendisliğiBitlis Eren Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. NUSRET BOZKURT

  5. Bitlis pomzası ile üretilen bimslerin mekanik özelliklerinin deneysel olarak araştırılması ve geliştirilmesi

    Experimental investigation of mechanical properties of Bitlis pumps

    YAŞAR KAYAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    İnşaat MühendisliğiDicle Üniversitesi

    İnşaat Yapı Ana Bilim Dalı

    DOÇ. DR. ABDULHALİM KARAŞİN

    DOÇ. DR. ERCAN IŞIK