Effects of weld-induced stressdistributions on stress intensity factors
용접 잔류 응력이 응력강도계수에 미치는 영향
- Tez No: 719416
- Danışmanlar: PROF. JOONMO CHOUNG
- Tez Türü: Yüksek Lisans
- Konular: Denizcilik, Gemi Mühendisliği, Marine, Marine Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2020
- Dil: İngilizce
- Üniversite: Inha University
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 69
Özet
Özet yok.
Özet (Çeviri)
This study investigates the temperature distribution, residual stress, and Stress Intensity Factors (SIFs) by three-dimensional thermo-mechanical finite element analyses of multi-pass welding. The welding process is simulated by using a moving volumetric heat source model, which is defined by using user subroutine DFLUX in Abaqus so that almost realistic results can be achieved. The temperature distribution characteristics on the welded plate are analyzed, and calculated temperature data are applied to the mechanical analysis model to observe the welding residual stress and thermal deformation on the welded plate, which has a significant effect on crack growth behavior. Welding residual stress effect on the crack tip is calculated from 'Mode Ⅰ' for different crack lengths; SIFs express the magnitude of the stress developed by the tip of the crack. Finite Element Method (FEM) model is created to define the Extended Finite Element Method (XFEM) meshing, which provides more accurate results for SIF calculations. Effects of weld-induced stress on SIFs are observed, and this stress can be reduced by applying cycle load. In the next step of the work, tensile loading analysis is performed to reduce the welding residual stress and to see the effect on the SIF values. The empirical equations are used for SIFs and J-integral calculations. The calculation results are compared with numerical analysis results; finally, the comparison of the results showed that a demonstration of the accuracy of the XFEM method.
Benzer Tezler
- 304L östenitik paslanmaz çeliklerin alın kaynak işlemlerinde oluşan kalıntı gerilmelerin sayısal analizi ve deneysel ölçülmesi
Experimental and numerical determination of residual stress state in butt welded 304L austenitc stainless steels
AHMAD AZHDARFAEGHİBONAB
Yüksek Lisans
Türkçe
2014
Makine MühendisliğiGazi ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. EZGİ GÜNAY
PROF. DR. CEMİL HAKAN GÜR
- MAG kaynak yönteminde dış manyetik alanların kaynak dikiş formuna ve ITAB'a etkisi
The Effect of external magnetic fields an weld bead form and heat affected zone in MAG welding process
İZZET TÜRKOCAĞI
- The effects of different edge joint angle, geometrical and welding parameters on butt welded plates of construction
Alın kaynaklı levhalarda levha düzlemine göre farklı birleşme açısı, geometrik ve kaynak parametrelerinin kaynaklı yapıya etkileri
GÜRCAN YILMAZ
Yüksek Lisans
İngilizce
2010
Makine MühendisliğiMarmara ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. ZAFER GÜL
- Kaynak kabiliyeti ve bilgisayar yardımı ile karbon eşdeğeri hesapları
Weldability and computerizing of carbon equivalents
ALİ ZİYA
- Effects of heat input and thermal cycles to the fracture toughness of api 5L grade X70m steel welded by gas metal arc welding
Isı girdisi ve ısıl döngülerin gaz altı kaynak yöntemi ile kaynaklanmış apı 5L X70m çeliğinin kırılma tokluğuna etkisi
EREN EROL
Yüksek Lisans
İngilizce
2019
Metalurji MühendisliğiOrta Doğu Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. CEMİL HAKAN GÜR
ÖĞR. GÖR. KORAY YURTIŞIK