Geri Dön

Araç çatısının ezilmesi durumunda B-sütunu tasarım optimizasyonu

B-pillar design optimization in case of crushing of vehicle roof

  1. Tez No: 723045
  2. Yazar: TAYFUN BAŞKARA
  3. Danışmanlar: DR. ÖĞR. ÜYESİ İSMAİL ÖZTÜRK
  4. Tez Türü: Yüksek Lisans
  5. Konular: Mühendislik Bilimleri, Engineering Sciences
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2022
  8. Dil: Türkçe
  9. Üniversite: Pamukkale Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Otomotiv Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 74

Özet

Bu çalışmada, araç B sütununun sonlu elemanlar modeli, yatay düzlemde iki farklı komponente ayrılmış ve sonrasında üç farklı sıcaklıkta şekillendirilmiş, üç boron çeliği tek ve kombinasyon halinde araç B sütununda kullanılmıştır. Boron çeliği malzeme parametreleri Johnson Cook malzeme modeli ile tanımlanmış ve Johnson kopma modeli de eklenmiştir. FMVSS 216 standartlarında çatı ezilmesi analizi gerçekleştirilen aracın IIHS standartlarında mukavemet-kütle oranı (SWR) ve spesifik enerji absorbsiyonu (SEA) incelenmiştir. Araç modeli olarak, Altair'ın sonlu elemanlar modelini hazırlamış olduğu Dodge Neon modeli seçilmiştir ve tekerlekler haricinde hiçbir komponent silinmemiştir. Araç çatısı ezilmesi analiz modeli Hyperworks ön çözücüsü yazılımıyla hazırlanmış, Radioss çözücüsüyle çözdürülmüştür. Analiz sonuçları HyperStudy yazılımına aktarılmış ve toplam tepki kuvveti ve spesifik enerji absorbsiyonunu arttırmaya yönelik deney tasarımı kurulmuştur. Deney tasarımı tam faktöriyel ve 4 seviyede çözdürülmüş sonrasında en uygun eğri uydurma yöntemiyle deney tasarımı fonksiyonları çıkarılmıştır. Tek amaçlı optimizasyonda maksimum toplam tepki kuvveti için bir kısıt belirlenmiş ve maksimum spesifik enerji absorbsiyonu için amaç fonksiyonu oluşturulmuştur. Tek amaçlı optimizasyon çalışmasında, Adaptif Yanıt Yüzey Metodu ve Kabul Edilebilir Yönler Metodu ile B Sütununun alt ve üst parçası için optimum kalınlık değerleri bulunmuştur. Çok amaçlı optimizasyon çalışmasında toplam maksimum tepki kuvveti ve toplam maksimum spesifik enerji absorbsiyonu değerlerinin maksimum olması amaçlanmış ve Çok Amaçlı Global Yanıt Yüzey Metodu ve Çok Amaçlı Genetik Algoritma yöntemleriyle Pareto Grafiği elde edilerek kullanıcıya geniş bir tasarım alanı sunulmuştur.

Özet (Çeviri)

In this study, the finite element model of the vehicle B pillar was divided into two different components in the horizontal plane and then three boron steels that shaped at three different temperatures were used in the vehicle B Pillar as a single or in combination. Boron steel material parameters are defined with Johnson Cook material model and Johnson failure model is also added. The strength to weight ratio (SWR) and specific energy absorption (SEA) of the vehicle, that roof crush analysis was performed in FMVSS 216 standards, were examined in IIHS standards. Dodge Neon model that Altair has prepared the finite element model, has been chosen as the vehicle model and no components have been deleted except for the wheels. Vehicle roof crush analysis model was prepared with Hyperworks preprocessor software and solved with Radioss solver. Analysis results were imported to HyperStudy software and an design of experiment (DOE) was established to increase the total resultant force and specific energy absorption. Design of experiment was solved in full factorial and for 4 levels, then experimental design curves were fitted with the most appropriate curve fitting method. In the single objective optimization, a constraint was determined for the maximum total resultant force and an objective function is established for the maximum specific energy absorption. In the single objective optimization study, optimum thickness values were found for the lower and upper part of the B Pillar with the Adaptive Response Surface Method and the Method of Feasible Directions. In the multi objective optimization study, it was aimed to maximize the total maximum resultant force and total maximum specific energy absorption values, and a wide design area was presented to the user by obtaining the Pareto Chart with the Multi Objective Global Response Surface Method and Multi Objective Genetic Algorithm method.

Benzer Tezler

  1. Auditory detection of clips failures in manufacturing

    Üretimde klips hatalarının ses tabanlı tespiti

    SABRİ SÜER

    Yüksek Lisans

    İngilizce

    İngilizce

    2023

    Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik Üniversitesi

    Bilgisayar Mühendisliği Ana Bilim Dalı

    DOÇ. DR. GÖKHAN İNCE

  2. Kitle iletişim özgürlüğünün sınırı olarak Türk Hukukunda adil yargılanma hakkına karşı suçlar

    The offences against the right to a fair trial in Turkish Law as the restriction of freedom of mass communication

    DİLEK EKMEKÇİ

    Doktora

    Türkçe

    Türkçe

    2013

    HukukGalatasaray Üniversitesi

    Kamu Hukuku Ana Bilim Dalı

    DOÇ. DR. ÜMİT KOCASAKAL

  3. Polonya'nın jeopolitiğinde Almanya'nın yeri

    Germany's location in Poland's geopolitics

    HASAN HOŞOĞLU

    Doktora

    Türkçe

    Türkçe

    2015

    Uluslararası İlişkilerKara Harp Okulu Komutanlığı

    Güvenlik Bilimleri Ana Bilim Dalı

    DOÇ. DR. SOYALP TAMÇELİK

  4. A critical assessment of Turkey's migration regime: Securitization versus human rights?

    Türkiye'nin göç rejiminin eleştirel bir değerlendirmesi: Güvenlikleştirmeye karşı insan hakları?

    KÜBRA AYDINLI

    Yüksek Lisans

    İngilizce

    İngilizce

    2015

    Siyasal BilimlerOrta Doğu Teknik Üniversitesi

    Avrupa Çalışmaları Ana Bilim Dalı

    DOÇ. DR. OSMAN GALİP YALMAN

  5. Kariyer yönetiminin çalışanın kuruma bağlılığına etkisi üzerine bir inceleme

    A study related to the impact of career management on the commitment of the employee to his institution

    SEVTAP KABADAYI

    Yüksek Lisans

    Türkçe

    Türkçe

    2013

    İşletmeAtılım Üniversitesi

    İşletme Yönetimi Ana Bilim Dalı

    YRD. DOÇ. DR. HALİL SEVAL