Geri Dön

Petrol-doğalgaz ve jeotermal kuyularında yeni üretilen ısı yalıtım malzemeleri kullanılarak ısı kayıplarının engellenmesi

Prevention of heat losses using newly produced thermal insulation materials in petroleum-natural gas and geothermal well

  1. Tez No: 723079
  2. Yazar: SEVİM KIZIL
  3. Danışmanlar: DR. ÖĞR. ÜYESİ HASAN OKTAY, DR. ÖĞR. ÜYESİ SARPER ÖZTÜRK
  4. Tez Türü: Yüksek Lisans
  5. Konular: Enerji, Makine Mühendisliği, Mühendislik Bilimleri, Energy, Mechanical Engineering, Engineering Sciences
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2021
  8. Dil: Türkçe
  9. Üniversite: Batman Üniversitesi
  10. Enstitü: Lisansüstü Eğitim Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 90

Özet

Tezde, yeni ve yerli olarak üretilen yalıtım malzemeleri ile yüksek sıcaklık gradyentine maruz bırakılan çıplak borulardaki boru ve ekipman hasarının en aza indirilerek enerji giderlerinin düşürülmesi ile farklı özelliklerdeki petrol, doğalgaz ve jeotermal sahalarında kullanılan kuyu ekipmanları ve tijlerdeki ısı kayıplarının azaltılarak özellikle yüksek viskoziteli nano-newtonlu petrol üretim sahalarındaki boru tıkanmalarının önüne geçilmesiyle tubing malzemelerde oluşan hasarların bertaraf edilmesi hedeflenmektedir. Bahsedilen ihtiyaçlara cevap verebilecek, perlit ve bor gibi ülkemizin kaynak bakımında dünyaca üstün rezervlerine sahip olduğu malzemeler kullanılarak yüksek ısı yalıtım özelliği sağlayan yerli ve yeni ısı yalıtım malzemelerin üretilmesi hedeflenmiştir. Çalışmamızda öncelikle farklı özelliklere sahip yalıtım numuneleri üretilmiş olup numunelerin mekanik ve ısıl özellikleri ASTM ve EN standartlarına göre tespit edilmiştir. Daha sonra, üretilen numunelerin test özellikleri karşılaştırma yapılıp tüm numunelerin ortalama özelliklerini gösteren K1 numunesi boru kaplama malzemesi olarak seçilmiştir. Son aşamada ise Ansys fluent programı kullanılacarak mevcut petrol üretim sahasının sistem modeli çıkarılmış olup farklı kalınlıklarda giydirilmiş boruların ısı kayıpları tespit edilmiştir. Mekanik ve ısıl test sonuçlarına göre üretilen yalıtım malzemesinin (K1) mevcut petrol kuyularında kullanılan seçilmiş referans malzemeye (G sınıfı beton) göre basınç dayanımında ve özgül ısısı değerlerinde sırasıyla % 99 ve % 27 azalma meydana gelirken ısıl yayılım değerinde % 25 artma olduğu görülmüştür. Üretilen yalıtım numunelerinin ısıl iletkenlik ve yoğunluk değerleri karşılaştırıldığında ise referans numunesine göre sırasıyla %92 ve % 91 oranında azalma olduğu tespit edilmiştir. Ansys modelleme sonuçlarına göre üretim borularındaki petrol çıkış sıcaklığı yalıtımsız boruda 23.7°C iken, 1 cm, 4 cm ve 10 cm kalınlıklarda izolasyon malzemesi ile kaplanmış borularda petrol çıkış sıcaklığı sırasıyla 27.4°C, 31.1°C ve 36.1°C olmuştur. Bununla birlikte, 1 cm, 4 cm ve 10 cm kalınlıklarda izolasyon malzemesi ile kaplanmış borularda ısı kaybı değerlerinde yalıtımsız boruya göre sırasıyla %8.3, %16.3 ve %27.1 oranında azalma olduğu tespit edilmiştir. Bu sonuçlara göre geliştirilen yöntemin mevcut petrol-jeotermal üretim kuyularında kullanımı ile birlikte mevcut üretimlerin arttırılması hedeflenmektedir

Özet (Çeviri)

In the thesis, using newly and locally produced insulation materials, It is aimed to minimize the damage to the pipes and equipment in the bare pipes exposed to high temperature gradientand the energy costs and to reduce the heat losses in the well equipment and rods used in oil, natural gas and geothermal fields with different properties and to eliminate the damages in tubing materials by preventing pipe blockages especially in oil production fields with high viscosity nano-newtons. It is aimed to produce domestic and new thermal insulation materials that can meet the aforementioned needs, provide high thermal insulation properties, by using materials such as perlite and boron, which our country has worldclass reserves in welding care. In our study, primarily insulation samples with different properties were produced and the mechanical and thermal properties of the samples were determined according to ASTM and EN standards. Then, the test properties of the produced samples were compared and the K1 sample, which showed the average properties of all samples, was chosen as the pipe coating material. At the last stage, the system model of the existing oil production field was created using the Ansys fluent program, and the heat losses of the pipes dressed in different thicknesses were determined. According to the mechanical and thermal test results, it was observed that the compressive strength and specific heat values of the insulation material (K1) produced according to the selected reference material (G class concrete) used in existing oil wells decreased by 99% and 27%, respectively, while there was a 25% increase in the thermal diffusivity value. Besides, the thermal conductivity and density values of the produced insulation samples were compared, and it was determined that there was a decrease of 92% and 91%, respectively. According to the Ansys modeling results, the petrolium outlet temperature in the production pipes was 23.7°C in the uninsulated pipe, while the the outlet temperature in the pipes covered with insulation material in 1 cm, 4 cm and 10 cm thicknesses was 27.4°C, 31.1°C and 36.1°C, respectively. Besides, it was determined that the heat loss values of pipes covered with insulation material in 1 cm, 4 cm and 10 cm thicknesses decreased by 8.3%, 16.3% and 27.1%, respectively, compared to the uninsulated pipe. According to these results, it is aimed to increase the current production with the use of the developed method in the existing oil-geothermal production wells.

Benzer Tezler

  1. Petrol/doğalgaz ve jeotermal kuyuları için ısı yalıtım özellikleri yüksek çimentoların geliştirilmesi

    Development of cements with high thermal insulation properties for oil/natural gas and geothermal wells

    SERDAR GÜNDÜZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Makine MühendisliğiBatman Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ SARPER ÖZTÜRK

    DR. ÖĞR. ÜYESİ HASAN OKTAY

  2. Numerical simulation of transient sandface and wellbore temperature behaviors of wells in multilayer single-phase oil and geothermal reservoirs

    Çok tabakalı, tek-fazlı petrol ve jeotermal rezervuarlardaki kuyuların kararsız kuyu cidarı ve kuyu içi sıcaklık davranışlarının sayısal simülasyonu

    CİHAN ALAN

    Doktora

    İngilizce

    İngilizce

    2022

    Petrol ve Doğal Gaz Mühendisliğiİstanbul Teknik Üniversitesi

    Petrol ve Doğal Gaz Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MURAT ÇINAR

  3. Kızıldere jeotermal rezervuarının teknik ve ekonomik değerlendirilmesi

    Technical and economical evaluation of Kızıldere geothermal field

    UMRAN SERPEN

  4. CaCO3 çökelmesinin çatlaklı ortamda akış davranışına etkilerinin incelenmesi

    Investigation of CaCO3 precipitation's impact on flow behavior in fractured models

    EDA AY DİLSİZ

    Doktora

    Türkçe

    Türkçe

    2023

    Enerjiİstanbul Teknik Üniversitesi

    Petrol ve Doğal Gaz Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ İBRAHİM METİN MIHÇAKAN

  5. Modelling wellbore hydraulics through thermal rheological sepiolite mud properties

    Sondaj kuyusu hidroliğinin sepiyolit çamuru ısıl reolojik özellikleriyle modellenmesi

    ALI ETTEHADI

    Doktora

    İngilizce

    İngilizce

    2016

    Petrol ve Doğal Gaz Mühendisliğiİstanbul Teknik Üniversitesi

    Petrol ve Doğal Gaz Mühendisliği Ana Bilim Dalı

    DOÇ. DR. GÜRŞAT ALTUN