CAD/CAM yardımıyla kişiye özel hazırlanmış polietereterketon post-korların kırılma dayanımlarının değerlendirilmesi
Evaluation of the fracture strength of CAD/CAM milled custom polyetheretherketone dental post-cores
- Tez No: 727448
- Danışmanlar: DR. ÖĞR. ÜYESİ SAMET TEKİN
- Tez Türü: Diş Hekimliği Uzmanlık
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Polietereterketon, PEEK, kırılma dayanımı, post, post-kor, Polietereterketon, fracture strength, PEEK post, post-core
- Yıl: 2022
- Dil: Türkçe
- Üniversite: Fırat Üniversitesi
- Enstitü: Diş Hekimliği Fakültesi
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 79
Özet
Amaç: Bu çalışmada farklı kompozisyondaki CAD-CAM ile üretilmiş PEEK materyallerinden kişiye özgü hazırlanan post-korların kırılma dayanımlarının ve kırılma tiplerinin karşılaştırılması amaçlanmıştır. Yöntem: Çalışmamızda kök boyu boyutları eşit olan 60 adet insan mandibular birinci premolar dişi 6 gruba ayrılarak (n=10) kök kanal tedavileri yapılmış ve dişler mine sement sınırının 2 mm üzerinden köklerinden ayrılmıştır. Dekoronasyon işlemi sonucunda dişlere 1 mm genişlikte shoulder basamak oluşturulup 2 mm yüksekliğinde ferrule elde edildi. Kırılma dayanımı testi için dişlere 1.6 mm çapındaki drillerle 10 mm derinliğinde post boşlukları oluşturuldu. Çalışmamızda post kor grupları; Everstick Cam Fiber Post Kor (Grup GF), Zirkonya Post Kor (Grup Z), Metal (Cr-Co) Post Kor (Grup M), Doldurucusuz saf PEEK Post Kor (GrupUP), %80 PEEK ile % 20 TiO2 Dolduruculu Post Kor (Grup TP), %80 PEEK ile %20 Seramik Dolduruculu Post Kor (Grup CP) olmak üzere 6 gruptan oluşturuldu. Post yuvalarına Everstick cam fiber, zirkonya, krom-kobalt (Cr-Co) metal, saf PEEK, %20 titanyum dioksit (TiO2) içerikli PEEK, %20 nanoseramik içerikli PEEK postlar uygulandı. Örnekler için koping oluşturuldu, simante edildi. Universal test cihazı ile dişin uzun aksına 135o eğimle statik yükleme yapıldı. Gruplar arasında ortalama kırılma dayanımı istatistiksel olarak Tek Yönlü Varyans Analizi (One-Way ANOVA) ile değerlendirildi ve post hoc Tukey HSD testi kullanılarak farka neden olan durumlar tespit edildi. Bulgular: İstatistiksel analiz sonuçlarına göre gruplar arasında ortalama kırılma dayanıklılığı yönünden anlamlı farklılık bulundu (F=7,830 ve p0.05). Z grubunda tamir edilebilir kırılma tipleri çoğunlukta olurken; diğer tüm gruplarda tamir edilemeyecek kırılma tipleri çoğunlukta bulunmuştur. Sonuç: Çalışmamızda tüm gruplar içerisinde zirkonya postlar kırılma dayanımı açısından en dayanıklı grup olurken TiO2 içerikli PEEK grubu en düşük kırılma dayanımına sahip grup olmuştur. Saf PEEK ve PEEK kompozit materyallerinin klinikte post materyali olarak kullanılabilmesi için daha çok çalışmaya ihtiyaç vardır.
Özet (Çeviri)
Objective: In this study, it was aimed to compare the fracture strength and fracture types of custom made post-cores prepared from PEEK materials produced with CAD-CAM of different composition. Method: In our study, 60 human mandibular first premolar teeth with equal root length were divided into 6 groups (n=10), root canal treatments were performed and the teeth were separated from their roots 2 mm above the enamel cement border. As a result of the decoration process, a 1 mm wide shoulder step was created for the teeth and a 2 mm high ferrule was obtained. For the fracture strength test, 10 mm deep post cavities were created with 1.6 mm diameter drills on the teeth. In our study, post core groups was formed from these 6 groups; Everstick Glass Fiber Post Core(Group GF), Zirconia Post Core(Group Z), Metal(Cr-Co) Post Core (Group M), Unfilled pure PEEK Post Core(GroupUP), 80% PEEK and 20% TiO2 Filled Post Core (Group TP), 80% PEEK and 20% Ceramic Filled Post Core (Group CP). Everstick glass fiber, zirconia, chromium-cobalt (Cr-Co) metal, pure PEEK, PEEK with 20% titanium dioxide (TiO2) and PEEK posts with 20% nanoceramic content were applied to the post slots. Coping was created and cemented for the samples. Static loading was applied to the long axis of the tooth with an inclination of 135o with a universal tester. The mean fracture strength between the groups was statistically evaluated with One-Way Analysis of Variance (One-Way ANOVA) and the conditions causing the difference were determined using the post hoc Tukey HSD test. Results: According to the statistical analysis results, a significant difference was found between the groups in terms of mean fracture strength (F=7,830 and p0.05). While repairable fracture types are in the majority in the Z group; fracture types that cannot be repaired were found in the majority in all other groups. Conclusion: In our study, zirconia posts were the most durable group in terms of fracture strength among all groups, while the PEEK group with TiO2 content was the group with the lowest fracture strength. More studies are needed to use pure PEEK and PEEK composite materials as post material in the clinic.
Benzer Tezler
- CAD/CAM ile üretilen pmma esaslı protez kaide materyaline uygulanan farklı yüzey işlemlerinin tamir bağlanma dayanımı üzerine etkisi
The effect of different surface tra-eatments applied to pmma based denture base material produced with CAD/CAM on repair bond strenght
ZAHİDE ERBULAK
Doktora
Türkçe
2023
Diş HekimliğiGazi ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. GÜLFEM ERGÜN
- PEEK (polyeter eter keton) altyapılı restorasyonlarda uygulanan farklı tamir yöntemlerinin bağlanma direnci etkinliğinin değerlendirilmesi
Evaluation of bond strength efficiency of different repair methods applied in PEEK (polyether ether ketone) infrastructure restorations
NUMAN ÇETİNKAYA
Diş Hekimliği Uzmanlık
Türkçe
2020
Diş HekimliğiDicle ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. ZELAL SEYFİOĞLU POLAT
- İki farklı polimer altyapı materyalinin farklı yüzey işlemleri sonrası rezin siman ile bağlantı direncinin karşılaştırılması
Comparison of bond resistance with resin cement after different surface treatments of TWO different polymer infrastructure materials
VERDA GÖKÇE ÇAKAR
Diş Hekimliği Uzmanlık
Türkçe
2022
Diş HekimliğiDicle ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. İBRAHİM HALİL TACİR
- Kaynak tekniğinde sayısal uygulamalar ve bir uzman sistem örneği
Başlık çevirisi yok
ENDER ATMACA
Yüksek Lisans
Türkçe
1998
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. MURAT VURAL
- Dönel simetrik elemanların modüler tasarımı CAM-CNC integrasyonu ve simülasyonu
Modular design, CAM-CNC integration and simulation of rotational parts
HAKAN MESTÇİ