Development of multilayer nonwoven composite by incorporation of nanofiber mat to enhance acoustic properties
Akustik özellikleri arttırmak için nanolif katmanların dâhil edilmesiyle çok katmanlı dokusuz yüzey kompozit kumaşların geliştirilmesi
- Tez No: 730248
- Danışmanlar: DR. ÖĞR. ÜYESİ YILMAZ ERBİL
- Tez Türü: Doktora
- Konular: Tekstil ve Tekstil Mühendisliği, Textile and Textile Engineering
- Anahtar Kelimeler: Ses Absorbsiyon, Ses İletimi, Nanolif, Dokusuz Yüzeyler, Elektrospinning, Sound Absorption, Sound Transmission, Nanofiber, Nonwoven, Electrospinning
- Yıl: 2022
- Dil: İngilizce
- Üniversite: Çukurova Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Tekstil Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 222
Özet
İstenmeyen gürültü, dünya çapında çeşitli alanlardaki araştırmacılar tarafından üzerinde durulan önemli bir konu haline gelmiştir. Dokusuz yüzeyler, düşük üretim maliyetleri ve düşük özgül ağırlıkları nedeniyle ses yalıtım malzemeleri olarak kullanılmaktadır. Nanolif mat, ağırlık ve boyut eklemeden geleneksel malzemelerin akustik özelliklerini iyileştirme potansiyeline sahiptir. Bu çalışmada, akustik uygulama için seçilmiş dokusuz yüzeylerin nanolif mat ile birleştirilme yeteneği ele alınmaktadır. Dört farklı polimerden eğrilerek bağlanmış (spunbond) dokusuz yüzeyler üzerinde otuz elektro-eğrilmiş nanolif mat üretildi. Son olarak, geleneksel eğrilerek bağlanmış-eritilerek bağlanmış-eğrilerek bağlanmış“spunbond-meltblown-spunbond”(SMS) sandviç yapıları, nanolif matlarla birleştirilerek dokusuz yüzey olarak elde edilmiştir. Nanolif matlarla ilişkili sandviç yapıların düşük ve orta frekanslı (Hz) ses seviyelerinde ve yüksek frekanslı ses seviyelerinde daha yüksek ses iletim kaybı gösterdiği bulunmuştur. 500 gsm SMS kompozit yapılara sahip nanolifli matın ses emme özellikleri, ses dalgalarının yansıması nedeniyle herhangi bir frekans seviyesinde gelişmemiştir. Nano mat ile sadece 230 ve 300 g/m2 SMS bazlı dokusuz yüzey ilişkilendirme, orta ve yüksek frekans seviyelerinde ses absorpsiyon katsayısını iyileştirdi. Çalışma ayrıca nanofiber çapının incelmesinin nihai sandviç yapının akustik performans özellikleri üzerinde olumlu bir etkisi olduğunu ortaya koydu. Nanofiber matın farklı polimerler ve dokusuz katmanlar için morfolojik karakterizasyonları da Taramalı elektron mikroskobu (SEM) ve FibraQuant 1.3 yazılımı ile araştırıldı.
Özet (Çeviri)
Undesirable noise has become a paramount issue that has been focused on by researchers of various fields worldwide. Nonwovens are used as sound insulation materials due to their low production cost and small specific gravity. Nanofiber mat has the potential to improve the acoustic properties of traditional materials without adding weight and size. The ability of the nonwoven incorporation with nanofiber mat for acoustic application is addressed in this study. Thirty electrospun nanofiber mats were produced on spunbonded nonwoven fabrics from four different polymers. Finally, traditional spunbond-meltblown-spunbond (SMS) sandwich structures were formed nonwoven with nanofiber mats. In this study 3 different gsm (230, 300, and 500) SMS nonwovens were used as base materials. It was found that sandwich structures associated with nanofiber mats showed higher sound transmission loss at low and medium frequency (Hz) sound levels, as well as high-frequency sound levels. The sound absorption properties of a nanofibrous mat with 500 gsm SMS composite structures were not improved at any frequency level due to reflection of sound waves. Only 230 and 300 gsm SMS based nonwoven association with nano mat improved sound absorption coefficient at medium and high levels frequency. The study also revealed that thinner nanofiber diameter had a positive impact on the acoustic performance properties of the final sandwich structure. Morphological characterizations of nanofiber mat for different polymers and nonwoven layers were also investigated by Scanning electron microscope (SEM) and FibraQuant 1.3 software.
Benzer Tezler
- Yanık tedavisinde kullanılmak üzere hibrit biyoaktif tekstil ürünlerinin geliştirilmesi
Development of hybrid bioactive textile products to use in burn treatment
GİZEM CEYLAN TÜRKOĞLU
Doktora
Türkçe
2020
Tekstil ve Tekstil MühendisliğiDokuz Eylül ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
PROF. DR. AYŞE MERİH SARIIŞIK
DOÇ. DR. SİNEM YAPRAK KARAVANA
- Medikal dokusuz yüzey yapılarının geliştirilmesi ve özelliklerinin incelenmesi üzerine bir araştırma
A research on development of medical nonwoven structures and investigation of their properties
HATİCE AKTEKELİ
Yüksek Lisans
Türkçe
2017
Tekstil ve Tekstil MühendisliğiEge ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. DENİZ DURAN
- Nanofibrous resonant membrane for acoustic applications
Akustik uygulamalar için nanolifli resonant membran
MERVE KÜÇÜKALİ ÖZTÜRK
Doktora
İngilizce
2017
Tekstil ve Tekstil Mühendisliğiİstanbul Teknik ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
PROF. DR. FATMA BANU NERGİS
PROF. DR. CEVZA CANDAN
- Elektromanyetik dalga soğurma özelliğine sahip katmanlı kompozit malzeme geliştirilmesi
Development of multilayer composite material for electromagnetic wave absorption
ZAFER YÜCEL
Doktora
Türkçe
2023
Elektrik ve Elektronik MühendisliğiKocaeli ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. TAMER SINMAZÇELİK
- QCM-D tekniğiyle çok tabakalı film oluşumunun ve ilaç salım özelliklerinin incelenmesi
Investigation of multilayer film formation and its drug release properties via QCM-D technique
ÖZNUR YOLAÇAN
Yüksek Lisans
Türkçe
2015
Kimya Mühendisliğiİstanbul ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. HÜSEYİN DELİGÖZ