Preparasyon sırasında nikel titanyum döner eğelerinin tork ve apikal basınç değerlerinin analizi
Analysis of torque and apical pressure values of nickel titanium rotary files during preparation
- Tez No: 733648
- Danışmanlar: DOÇ. DR. EMRE BAYRAM
- Tez Türü: Diş Hekimliği Uzmanlık
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Reciproc, Reciproc Blue, Hyflex EDM, One Curve, tork, apikal kuvvet, Dental aygıtlar, Dental eğeler, Dental kavite preparasyonu, Diş apeksi, Nikel, Titanyum, Reciproc, Reciproc Blue, Hyflex, One Curve, torque, apical force values, Dental instruments, Dental files, Dental cavity preparation, Tooth apex, Nickel, Titanium
- Yıl: 2022
- Dil: Türkçe
- Üniversite: Tokat Gaziosmanpaşa Üniversitesi
- Enstitü: Diş Hekimliği Fakültesi
- Ana Bilim Dalı: Endodonti Ana Bilim Dalı
- Bilim Dalı: Endodonti Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
Amaç: Bu in vitro çalışmanın amacı; eğelerin farklı derinliklerde ürettikleri tork ve apikal basınç kuvvetlerini değerlendirilmektir. Materyal ve Metod: Bu çalışmada 96 adet akrilik blok kullanıldı. Gruplar kullanılacak eğelere göre (Reciproc, Reciproc Blue, One Curve, Hyflex One File) 4 gruba ayrıldı.(n=24). Her bir grup pecking (gagalama) derinliği 4 mm apikale 2 mm koronale veya 3 mm apikale 1 mm koronale olacak şekilde 2 alt gruba ayrıldı (n=12) ve gruplar üreticinin talimatları doğrultusunda preparasyon yapıldı ve çıkan sonuçlar özel üretilen test cihazında analiz edildi. Preparasyon sonucunda oluşan veriler, tek yönlü varyans analizi ve ikili karşılaştırmalar ise Post-Hoc Tamhane's T2 kullanılarak analiz edildi. Bulgular: Tork değerlerinin pecking derinliğine bağlı olarak arttığı ve en yüksek değerin Reciproc, en düşük tork değerinin One Curve gruplarında oluştuğu bulundu. Sadece Reciproc Blue grubunda istatistiksel olarak anlamlı tork artışı gözlendi (p<0,001). Kuvvet değerlerinde ise pecking derinliği arttıkça rotary gruplarda artma, reciproc gruplarında azalma oluştuğu bulundu. En yüksek kuvvet değerleri Hyflex grubunda, en düşük kuvvet değeri ise Reciproc Blue grubunda oluştuğu bulundu. Sadece Hyflex grubunda istatistiksel olarak anlamlı kuvvet artışı gözlendi (p<0,001). Sonuç: Sonuç olarak tork değerlerinin pecking derinliğine bağlı olarak arttığı ve en yüksek değerinin Reciproc grubunda oluştuğu bulundu. Kuvvet değerlerinde ise pecking derinliği arttıkça rotary gruplarda artma, reciproc gruplarında azalma oluştuğu bulundu. En yüksek apikal kuvvet değerleri Hyflex grubunda oluştuğu bulundu.
Özet (Çeviri)
Aim: The aim of this in vitro study; To evaluate the torque and apical pressure forces produced by the files at different depths. Materials and Methods: 96 acrylic blocks were used in this study. The groups were divided into 4 groups according to the files to be used (Reciproc, Reciproc Blue, One Curve, Hyflex One File) (n=24). Each group was divided into 2 subgroups with a pecking depth of 4 mm apical 2 mm coronal or 3 mm apical 1 mm coronal (n=12) and the groups were prepared in a specially manufactured test device in accordance with the manufacturer's instructions. The data resulting from the preparation were analyzed using one-way analysis of variance and pairwise comparisons using Post-Hoc Tamhane's T2. Results: It was found that the torque values increased depending on the pecking depth and the highest value occurred in Reciproc and the lowest torque value in One Curve groups. Statistically significant torque increase was observed only in the Reciproc Blue group (p<0.001). In the force values, it was found that as the pecking depth increased, there was an increase in the rotary groups and a decrease in the reciproc groups. The highest force values were found in the Hyflex group, and the lowest force values were found in the Reciproc Blue group. A statistically significant increase in apical force was observed only in the Hyflex group (p<0.001). Conclusion: As a result, it was found that the torque values increased depending on the pecking depth and the highest value occurred in the Reciproc group. In the force values, it was found that as the pecking depth increased, there was an increase in the rotary groups and a decrease in the reciproc groups. The highest force values were found in the Hyflex group.
Benzer Tezler
- Rotasyon hareketi yapan üç farklı nikel-titanyum eğe sisteminin yapay kanalda döngüsel yorulma dirençlerinin karşılaştırılması
Comparison of cyclic fatigue resistance of three different nickel-titanium rotary file systems in artificial canal
BERİVAN BİNGÖL KAYA
Diş Hekimliği Uzmanlık
Türkçe
2022
Diş HekimliğiDicle ÜniversitesiEndodonti Ana Bilim Dalı
PROF. DR. ÖZKAN ADIGÜZEL
- Kök kanal preparasyonunda kullanılan protaper unıversal, protaper next ve recıproc döner eğe sistemlerinin dentin üzerinde oluşturduğu mikro çatlakların değerlendirilmesi
Evaluation of microcracks on dentin that created with protaper universal, protaper next and reciproc rotary file systems used in root canal preparations
MELTEM DEVECİ
Diş Hekimliği Uzmanlık
Türkçe
2017
Diş HekimliğiDicle ÜniversitesiEndodonti Ana Bilim Dalı
DOÇ. SADULLAH KAYA
- Farklı nikel titanyum eğelerin kök kanal şekillendirmede ve retreatmenttaki etkinliklerinin değerlendirilmesi
Evaluation of root canal shaping ability and retreatment effectiveness of different nickel titanium files
HAKAN GÖKTÜRK
Doktora
Türkçe
2011
Diş HekimliğiOndokuz Mayıs ÜniversitesiEndodonti Ana Bilim Dalı
DOÇ. DR. ALİ ÇAĞIN YÜCEL
- Farklı üretim işlemleri kullanılarak üretilmiş yeni nesil nikel-titanyum döner eğe sistemlerinin şekillendirme yeteneklerinin ve döngüsel yorgunluk dirençlerinin karşılaştırmalı olarak incelenmesi
Comparative evaluation of the shaping ability and cyclic fatique resistance of new generation nickel-titanium rotary file systems manufactured by different manufacturing processes
EMRAH KARATAŞLIOĞLU
Doktora
Türkçe
2015
Diş HekimliğiGaziantep ÜniversitesiEndodonti Ana Bilim Dalı
DOÇ. DR. CİHAN YILDIRIM
PROF. DR. TAYFUN ALAÇAM
- Kök kanal preparasyonunda kullanılan üç farklı döner eğe sisteminin dentinde oluşturduğu mikro çatlakların değerlendirilmesi
Evaluation of microcracks formed by three different rotary file systems used in root canal preparation on dentin
ÖMER ÖZKILIÇ
Diş Hekimliği Uzmanlık
Türkçe
2022
Diş HekimliğiDicle ÜniversitesiEndodonti Ana Bilim Dalı
PROF. DR. ÖZKAN ADIGÜZEL