GPS ile Marmara Bölgesindeki yer kabuğu hareketlerinin belirlenmesi
Başlık çevirisi mevcut değil.
- Tez No: 75036
- Danışmanlar: PROF. DR. RASİM DENİZ
- Tez Türü: Doktora
- Konular: Jeodezi ve Fotogrametri, Geodesy and Photogrammetry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1998
- Dil: Türkçe
- Üniversite: İstanbul Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Jeodezi ve Fotogrametri Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 113
Özet
Özet yok.
Özet (Çeviri)
Figure 7.18 Development of the wake behind an impulsively started cylinder at Re=300073Figure 7.19 Computational meshes used for two-dimensional lid-driven cavity flow problem: a) quadrilateral 13x13 node pressure/velocity b) quadrilateral 13x13 pressure, 25x25 velocity c) quadrilateral 25x25 pressure/velocity d) triangular 13x13 velocity/pressure e) triangular 13x13 pressure, 25x25 velocity f) triangular 25x25 pressure/velocity meshes77Figure 7.20 Velocity vectors for lid-driven cavity flow problem: results obtained using meshes presented in Figure 7.1978Figure 7.21 Vorticity contours for lid-driven cavity flow problem: resultsobtained using meshes presented in Figure 7.1979Figure 7.22 Pressure contours for lid-driven cavity flow problem: resultsobtained using meshes presented in Figure 7.1980Figure 7.23 Velocity distributions along horizontal and vertical centerlines for lid-driven cavity flow: a) Quadrilateral mesh results b) triangular mesh results81Figure 7.24 Convergence of the velocity field for a) quadrilateral b) triangular element solutions82Figure 7.25 Computational meshes used for three-dimensional lid-driven cavity flow problem: a) 11x11x6 b) 21x21x11 c)41x41x21 node hexahedral, d) 11x11x6 e) 21x21x11 f) 41x41x21 node tetrahe- dral grid86Figure 7.26 Iso-pressure surface plots of lid-driven cavity flow results obtained with pQ2Ql elements87Figure 7.27 Iso-pressure surface plots of lid-driven cavity flow results obtained with pP2Pl elements88Figure 7.28 Velocity vector plots of lid-driven cavity flow results obtained with pQ2Ql elements: a) z = 0.1 b) z = 0.25 c) z = 0.5 (symmetry) plane (vector scale factor: 0.25)89Figure 7.29 Velocity vector plots of lid-driven cavity flow results obtained with pQ2Ql elements: a) x = 0.25 b) x = 0.50 c) x = 0.75 plane (vector scale factor: 0.75)90Figure 7.30 Velocity vector plots of lid-driven cavity flow results obtained with pQ2Ql elements: a) y = 0.75 b) y = 0.50 c) y = 0.25 plane (vector scale factor: 1.00)91IX
Benzer Tezler
- Marmara bölgesinde mutlak gravite ölçme ve değerlendirmeleri
The absolute gravity measurements and data processing in Marmara region
HASAN ONUR ÖZDİĞER
Yüksek Lisans
Türkçe
2010
Jeodezi ve FotogrametriYıldız Teknik ÜniversitesiHarita Mühendisliği Ana Bilim Dalı
DOÇ. DR. UĞUR DOĞAN
- İTÜ-ETH2-TUJJB GPS projesinde değişik kampanya ölçülerinin birleştirilmesi ve sonuçlarının yerkabuğu hareketleri yönünden irdelenmesi
Combination of observations from various campaigns within the ITU-ETH2-TNUGG GPS polyproject and analysis of the results with respect to crustal deformations
ALİ KILIÇOĞLU
- Marmara bölgesinin doğu kesiminde yatay yerkabuğu hareketleri ve gerinim birikiminin araştırılması
Determining the horizontal crustal movements and amount of strain in the eastern part of Marmara region
BEDİHA ÇOLAK
Yüksek Lisans
Türkçe
2010
Jeodezi ve FotogrametriYıldız Teknik ÜniversitesiHarita Mühendisliği Ana Bilim Dalı
DOÇ. DR. UĞUR DOĞAN
- 17 Ağustos 1999 İzmit depremi sonrası Marmara bölgesindeki gravite alanın zaman içindeki değişiminin belirlenmesi
Determination of the time dependent microgravity area changes occurring as a result of the august 17, 1999 İzmit earthquake in the Marmara Region.
GÖKHAN ARSLAN
Yüksek Lisans
Türkçe
2012
Jeofizik MühendisliğiSakarya ÜniversitesiJeofizik Mühendisliği Ana Bilim Dalı
PROF. DR. RUHİ SAATÇILAR
- Avcılar heyelan bölgesindeki deformasyonların kinematik modellerle belirlenmesi
Investigation of the deformation on the Avcilar landslide area with kinematic models
DENİZ ÖZ
Yüksek Lisans
Türkçe
2009
Jeodezi ve FotogrametriYıldız Teknik ÜniversitesiJeodezi ve Fotogrametri Mühendisliği Ana Bilim Dalı
DOÇ. DR. UĞUR DOĞAN