Geri Dön

Özgün paletli mikro kompresörün palet toleranslarının performansa etkisinin deneysel olarak incelenmesi

Experimental investigation of the effect of tolerances on performance of a novel vane micro compressor

  1. Tez No: 751261
  2. Yazar: RENGİM ÖZOKUTGEN
  3. Danışmanlar: DOÇ. DR. MELİH OKUR
  4. Tez Türü: Yüksek Lisans
  5. Konular: Otomotiv Mühendisliği, Automotive Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2022
  8. Dil: Türkçe
  9. Üniversite: Gazi Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Otomotiv Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 104

Özet

Endüstride basınçlı hava ihtiyacını karşılamak için birçok farklı tipte kompresör kullanılmaktadır. Farklı kompresör tipleri üzerine araştırmalar halen devam etmektedir. Gövdeden paletli kompresörler, az parça, yüksek verim ve basitliğe göre daha çok tercih edilmektedir. Bu çalışmada, iki kademeli, özgün menteşe sistemli ve gövdeden paletli plaka üretim yöntemine sahip bir mikro kompresör tasarlanmış ve farklı hızlarda basınç karakteristiği oluşturulmuştur. İmalat kolaylığı nedeniyle modüler olarak eklenen yeni kademelerin palet-rotor ile gövde arasındaki tolerans boşlukları değiştirilerek kompresörün performans değerlerinin belirlenmesi amaçlanmıştır. Deneyler, farklı toleranslarda üç set (1. Set=0,02 mm, 2. ve 3. Set = 0,05-0,07 mm) olacak şekilde, 600-3000 devir arasında 5 farklı devirlerde yapılmıştır. En iyi sonuçların elde edildiği 1. Set deneylerde kompresör 600 devirde ancak 6 Bar'a kadar çıkabilmiştir. En yüksek devir olan 3000 devirde ise 8 Bar olan limit basınçlara 600 devire göre yaklaşık 6 kat daha kısa sürede çıkılabilmiştir.

Özet (Çeviri)

Many different types of compressors are used to meet the compressed air requirement in the industry. Research on different compressor types is still ongoing. Recently, numerous research has been done on rotary piston compressors to manufacture compressors more efficiently, maintainable and cheaply. In this study, a two-stage micro-compressor with a unique hinge system and a pallet plate production method from the body was designed and pressure characteristics at different speeds were created. It is aimed to determine the performance values of the compressor by changing the tolerance gaps between the vane-rotor and the body of the new stages added as modular due to the ease of manufacturing. The experiments were carried out in five different cycles between 600-3000 RPMs, with three sets of different tolerances (the First Set = 0,02 mm, the second set and the third set = 0,05-0,07 mm). In the first set of experiments where the best results were obtained, the compressor could only go up to 6 Bar at 600 RPM. At the highest speed, 3000 RPM, the limit pressures of 8 Bar could be reached in approximately six times shorter than at 600 RPM.

Benzer Tezler

  1. Döngüsel paletli mikro kompresörün performansının artırılması

    Improving the performance of the rotary vane micro compressor

    İSMET KARAKAŞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    Makine MühendisliğiGazi Üniversitesi

    Otomotiv Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MELİH OKUR

  2. Mikro soğutma ve buzdolapları için küçük döngüsel kompresörün toz metalurjisi ile tasarımı ve imalatı

    Design and manufacture with powder metallurgy of tiny rotary compressor for micro cooling & refrigeration

    SALİH TERYAKİ

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Makine MühendisliğiGazi Üniversitesi

    Otomotiv Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MELİH OKUR

  3. Otonom robot ve kontrol birimi tasarımı

    Design of autonomous robot and control unit

    HALİL DURMUŞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2015

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektronik ve Haberleşme Mühendisliği Ana Bilim Dalı

    PROF. DR. ECE OLCAY GÜNEŞ

  4. Health-related consistency in food choice and consumption: The role of household and product characteristics

    Gıda tercihi ve tüketiminde sağlık ilişkili tutarlılık: Hane halkı ve ürün özelliklerinin rolü

    GÖKHAN SÜRMELİ

    Doktora

    İngilizce

    İngilizce

    2020

    İşletmeİstanbul Teknik Üniversitesi

    İşletme Mühendisliği Ana Bilim Dalı

    PROF. DR. KEMAL BURÇ ÜLENGİN

  5. Seydişehir alüminasında kalıplamayla seramik malzemelerin üretilmesi

    Başlık çevirisi yok

    TURAN TAMBAŞ

    Yüksek Lisans

    Türkçe

    Türkçe

    1998

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji Mühendisliği Ana Bilim Dalı

    PROF. DR. SERDAR ÖZGEN