Asenkron motorun 'kayan kip' kontrolü
Başlık çevirisi mevcut değil.
- Tez No: 75563
- Danışmanlar: PROF. DR. R. NEJAT TUNCAY
- Tez Türü: Yüksek Lisans
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1998
- Dil: Türkçe
- Üniversite: İstanbul Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Elektrik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 84
Özet
ÖZET Asenkron motor dinamiği incelenerek, kayan kip kontrol yöntemi için MATLAB ortamında kontrol programı oluşturulmuştur. SIMULINK simülasyon tekniği kullanılarak, kayan kip kontrol yöntemi asenkron motora uygulanmıştır. Simülasyon modelleri ve sonuçları 'Bölüm 6' da verilmiştir.
Özet (Çeviri)
SUMMARY Sliding Mode Control of Induction Machine Equations of motion of the systems are nonlinear due to the complexitiy of the system's dynamics. Various techniques have been suggested for the design of controller. The control theory of variable structure systems (VSC) can be used on the converter and the induction machine together to develop a control strategy that can deal with switching converter and motor nonlinearities. The application of sliding mode control to the induction machine and its simulation results in MATLAB and SIMULINK are presented. Dynamic Model of Induction Machine The dynamic performance of an induction machine is complex because of the coupling effect between the stator and rotor phases, where the coupling coefficients vary with rotor position. Therefore, the machine model can be described by differential equations with time-varying coefficients. The dynamic model of a machine can be expressed in either a stationary or a rotating reference frame. In a stationary frame, the reference a and |3 axes are fixed on the stator, where as in a rotating reference frame these are rotating. The rotating frame may either be be fixed on the rotor or move at synchronous speed. The advantage in a synchronously rotating frame model is that with sinusoidal supply the variables appear as dc quantities in steady-state conditions. XIRotor and stator equations can be given as follows, V9d=R6isd-co8M/8
Benzer Tezler
- Alan yönlendirmeli asenkron motorun bulanık kayan kip ve genetik kayan kip konum kontrolü
Fuzzy sliding mode control and genetic sliding mode control for position of vactor controlled induction motors
METİN DEMİRTAŞ
Doktora
Türkçe
2002
Elektrik ve Elektronik MühendisliğiYıldız Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
DOÇ. DR. İBRAHİM ŞENOL
- Asenkron motor için adaptif kesirli kayan kipli gözlemci tasarımı
Adaptive fractional order sliding mode observer design for induction motor
ERDEM İLTEN
Doktora
Türkçe
2019
Elektrik ve Elektronik MühendisliğiBalıkesir ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
PROF. DR. METİN DEMİRTAŞ
- Asenkron motorların hız algılayıcısız kontrolünde yeni bir algoritmanın geliştirilmesi ve uygulaması
A new approach for sensorless speed control of induction motors and its application
MUSTAFA GÜRKAN AYDENİZ
Doktora
Türkçe
2005
Elektrik ve Elektronik MühendisliğiYıldız Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
DOÇ.DR. İBRAHİM ŞENOL
- Güneş paneli beslemeli pompa sistemi tasarımı , kontrolü ve benzetimi
Solar panel feed pump system design, control and simulation
ABDURRAHMAN ERMELİ
Yüksek Lisans
Türkçe
2023
Elektrik ve Elektronik MühendisliğiKocaeli ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
PROF. DR. NURETTİN ABUT
- Model öngörülü kontrol ve çok seviyeli evirici içeren IoT tabanlı endüstriyel motor sürücüsü geliştirilmesi
Improvement of IoT-based industrial motor drive including model predictive control and multilevel inverter
AYDIN BOYAR
Doktora
Türkçe
2024
Elektrik ve Elektronik MühendisliğiNiğde Ömer Halisdemir ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. YASİN KABALCI
PROF. DR. ERSAN KABALCI