Open-circuit fault-tolerant controlmethods for a multiphase permanentmagnet machine
Başlık çevirisi mevcut değil.
- Tez No: 759110
- Danışmanlar: Belirtilmemiş.
- Tez Türü: Doktora
- Konular: Mühendislik Bilimleri, Engineering Sciences
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2021
- Dil: İngilizce
- Üniversite: University of Leicester
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 216
Özet
Özet yok.
Özet (Çeviri)
This thesis focuses on the open-circuit fault-tolerant (OCFT) control of a multiphase machine to increase their reliability. There are several OCFT control method in the literature. First developed OCFT control methods focused on a control method that does not need a change on the drive system. However these developed methods had very high resistive loss. In the following years, new methods were developed to obtain a minimum ohmic loss. Nevertheless, these methods were developed up to two phase OCFT conditions. This thesis presents three different solutions for the open-circuit fault conditions, so the five-phase machine can run up to three phase OCFT condition. These methods had also minimum ohmic losses compared to the existing methods, and were developed by using the current space vector (SV) theory, rotating magnetomotive force (MMF) of a machine and d-q (direct-quadrature) axes currents. In the first developed method,the vectoral sum of current SV in sinusoidal machine is a constant resultant SV. This resultant SV has been reobtained under OCFT conditions. Each phase produces two MMF terms; a pulsating and a constant term. The sum of these pulsating parts is zero under healthy condition. However, this is not zero under open-circuit fault conditions. A solution has been found to eliminate these pulsating parts in the second method. D-q axes currents are smooth when there is no fault in the machine. Nevertheless, these currents pulsates under faulty conditions. In the third developed method, a solution has been proposed to obtain a smooth d-q currents for OCFT conditions. This thesis also presents a solution to reduce the torque ripple for healthy and OCFT conditions. These developed methods has been validated by using an finite element analysis (FEA) software.
Benzer Tezler
- Analysis and fault tolerant control of a five-phase axial flux permanent magnet synchronous machine
Beş fazlı eksenel akılı sabit mıknatıslı senkron makinenin analizi ve hata toleranslı kontrolü
GÖKSENİN HANDE BAYAZIT
Yüksek Lisans
İngilizce
2021
Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik ÜniversitesiElektrik ve Elektronik Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ OZAN KEYSAN
- Fault tolerant control of a dual-three-phase electrical machine with predictive current control and reduced computation burden
Çift üç fazlı elektrik makinasının hesaplama yükü azaltılmış öngörülü akım kontrolcüsüyle hata toleranslı kontrolü
HAKAN SARAÇ
Yüksek Lisans
İngilizce
2022
Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. OZAN KEYSAN
- Hataya bağışıklı mikroişlemci tasarımı
Fault tolerant microprocessor design
BUSE USTAOĞLU
Yüksek Lisans
Türkçe
2015
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektronik ve Haberleşme Mühendisliği Ana Bilim Dalı
PROF. DR. MÜŞTAK ERHAN YALÇIN
- Yeni nesil dağıtım şebekelerinde kullanılan yönlü aşırı akım rölelerinde hat kopukluğu ve arıza noktası tespiti
Determination of line disconnection and fault location with directional overcurrent protection relays in electrical distribution networks
YAVUZ UYAR
Yüksek Lisans
Türkçe
2018
Elektrik ve Elektronik MühendisliğiYıldız Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
ÖĞR. GÖR. YAVUZ ATEŞ
- Detection of photovoltaic panel faults with thermal camera and UV led
Fotovoltaik panel hatalarının termal kamera ve UV led ile tespiti
ATIL EMRE COŞGUN
Doktora
İngilizce
2020
Mühendislik BilimleriAksaray ÜniversitesiElektrik-Elektronik ve Bilgisayar Mühendisliği Ana Bilim Dalı
PROF. DR. MEHMET REŞİT TOLUN