Development and characterization of recycled polymers by using natural fibers
Doğal lif kullanılarak geri dönüşümlü polimerlerin geliştirilmesi ve karakterizasyonu
- Tez No: 768074
- Danışmanlar: YRD. DOÇ. DR. YASER ALAIWI
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2022
- Dil: İngilizce
- Üniversite: Altınbaş Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Makine Mühendisliği Bilim Dalı
- Sayfa Sayısı: 92
Özet
Plastiğin geri dönüştürülmesi, atık yönetimi çözümlerinin yanı sıra çevrenin genel durumunun iyileştirilmesi için esastır. Plastiğin geri dönüştürülmesine ilişkin kalite kriterleri, giderek müşteriyle doğrudan temasa geçmeyi ve standart geri dönüşüm teknikleriyle karşılanmasını talep ediyor. Doğal liflerle güçlendirilmiş polimer kompozit malzemeler, hafif olmaları, üstün bir yaşam döngüsüne sahip olmaları, biyolojik olarak parçalanabilmeleri, ucuz olmaları ve mükemmel mekanik niteliklere sahip olmaları nedeniyle büyük ilgi görmektedir. Bunun için bu araştırmada, geri dönüştürülmüş HDPE, Doğal Lifler eklenerek geliştirilmiştir. Çevre dostu ve yeşil kompozitlerin yaratılması, jüt ve pamuğun bir polimer matrisine dahil edilmesiyle mümkün olmuştur. Jüt bazlı kompozitlerin performansı, diğer doğal Lifler, sentetik Lifler veya parçacıkların eklenmesiyle hibridizasyon işlemi yoluyla daha da geliştirilebilir. Veriler, katman sayısı ile mukavemet seviyesi arasında doğrudan bir ilişki olduğunu gösterdi; dahası, sonuçlar, dokuma efektlerin konunun ilgi çekici bir yönünü vurguladığını ortaya koydu. Dokuma takviyeli HDPE kompozitin gerilme mukavemeti, doğrudan bir sonucu olarak büyümüştür. belirtilen dokuma tasarımının etkisi. Bu çalışmadaki sonuç, kompozit malzemenin çekme mukavemetinin, Elyaf oranı arttıkça artmasıdır. Her iki Fiber türü de incelendiğinde aynı sonuca sahipti. Kompozitler, liflerin ve polimerin en iyi niteliklerinin dahil edilmesini içeren formülasyon işlemiyle oluşturulur. Ardından ANSYS kullanarak doğrulayın.
Özet (Çeviri)
Recycling plastic is essential to the improvement of waste management solutions as well as the overall state of the environment. The quality criteria of recycling plastic increasingly demanding into direct touch with the customer and be met by standard recycling techniques. Natural fibres reinforced polymer composite materials are attracting a lot of attention due to the lightweight, have a superior life cycle, biodegradable, inexpensive, and have excellent mechanical qualities. For that in this research, the recycled HDPE is improved by adding Natural Fibres. The creation of ecofriendly and green composites was made possible by the incorporation of jute and cotton into a polymer matrix. The performance of jute-based composites can be improved further through the hybridization process by the addition of other natural Fibres, synthetic Fibres, or particles. The data showed that there is a direct correlation between the number of layers and the level of strength; moreover, the results revealed that the weaved effects highlight an intriguing aspect of the topic. The tensile strength of the woven reinforced HDPE composite has grown as a direct result of the influence of the specified weave design. The result in this work is that the tensile strength of the composite material improves as the proportion of Fibres increases. Both types of Fibre had the same result when examined. The composites are created through the formulation process, which involves the inclusion of the best qualities of fibres and polymer. Then verify using ANSYS.
Benzer Tezler
- Perlit katkılı poli(laktik asit) kompozitlerinin hazırlanması ve karakterizasyonu
Preparation and characterization of perlite filled poly(lactic acid) composites
DENİZ YILMAZ SAVCI
Yüksek Lisans
Türkçe
2023
Polimer Bilim ve TeknolojisiYalova ÜniversitesiPolimer Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. HATİCE AYLİN KARAHAN TOPRAKÇI
- Enerji depolamada yenilikçi karbon yapılı esnek yüzeylerin üretimi ve analizi
Production and analysis of novel carbon structured flexible surfaces for energy storage applications
ESRA ŞERİFE KILIÇ
Doktora
Türkçe
2024
Tekstil ve Tekstil Mühendisliğiİstanbul Teknik ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
PROF. DR. ALİ DEMİR
- Stabilization of bentonite and kaolinite claysusing recycled gypsum and liquid sodium silicate
Başlık çevirisi yok
MEHMET SAGNAK
- Innovative membrane with recovered carbon black (rCB)
Geri kazanılmış siyah karbon ile inovatif membran
TUĞÇE AKCA GÜLER
Yüksek Lisans
İngilizce
2024
Çevre Mühendisliğiİstanbul Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. İSMAİL KOYUNCU
- Development of porous ceramics for wastewater purification
Atık su filtrelenmesi için gözenekli seramiklerin geliştirilmesi
DAMLA ZEYDANLI
Doktora
İngilizce
2019
Kimyaİstanbul Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. SÜLEYMAN AKMAN
DOÇ. DR. ÇEKDAR VAKIF AHMETOĞLU