Stages and methods of creativity in an industrial product development (with a case study in bicycle design)
Başlık çevirisi mevcut değil.
- Tez No: 78039
- Danışmanlar: YRD. DOÇ. DR. CAN ÖZCAN
- Tez Türü: Yüksek Lisans
- Konular: Endüstri ve Endüstri Mühendisliği, Industrial and Industrial Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1998
- Dil: İngilizce
- Üniversite: İzmir Yüksek Teknoloji Enstitüsü
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Endüstri Ürünleri Tasarımı Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 133
Özet
ABSTRACT This thesis is aimed on researching the creativity process that is concealed in the design process itself. The following chapters will include certain creativity concepts that were filtered out of a variety of processes. There are certain aspects to take into consideration as not only of a creative process but the progressive way of following certain methods of design. The first chapter includes some examples on the blocks that cease the creativity in the design process. Examples will be given to display the way of keeping the continuity of the creative mind. These are methods that designers use in daily life but are not aware of its existence. Processes will be included in the second chapter that will focus on the way of designing and methods of the design process. These methods were included in order to give the creativity process an engineering pull-down and cease it from artistic dispersal. It could be seen that examples given from a bicycle design will be included in all chapters. This is to uphold, and back-up the third chapter. In this chapter the case study of a bicycle design is included. The processes stated in the previous chapters were used in the process of the bicycle design. IV
Özet (Çeviri)
Özet çevirisi mevcut değil.
Benzer Tezler
- Şirket karlılığının artırılmasında insan kaynakları ile ilgili bir model araştırması
Başlık çevirisi yok
CÜNEYT DEMİRKAYA
Yüksek Lisans
Türkçe
1998
İnşaat Mühendisliğiİstanbul Teknik ÜniversitesiYapı İşletmesi Ana Bilim Dalı
PROF. DR. DOĞAN SORGUÇ
- Ürün geliştirme ve kalite fonksiyon açınımı
Product development and quality function deployment
BÜLENT SİVİŞOĞLU
Yüksek Lisans
Türkçe
1995
Endüstri ve Endüstri Mühendisliğiİstanbul Teknik ÜniversitesiPROF.DR. MURAT DİNÇMEN
- Bridging the GAP between product and user: A design framework to establish a free relationship with tehnology
Ürün ile kullanıcı arasında köprü kurmak: Teknoloji ile özgür bir ilişki kurabilmek için bir tasarım çerçevesi
ENVER TATLISU
Doktora
İngilizce
2023
Endüstri Ürünleri Tasarımıİstanbul Teknik ÜniversitesiEndüstriyel Tasarım Ana Bilim Dalı
PROF. DR. GÜLNAME TURAN
- Tepki veren cephelerin standart ürünlerle tasarımı: Yeniden tasarım modeli
Designing adaptive facades with standard products: Redesign model
BAHAR BAŞARIR
Doktora
Türkçe
2019
Mimarlıkİstanbul Teknik ÜniversitesiMimarlık Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MEHMET CEM ALTUN
- Kansei mühendisliği bulguları ile çalışmanın endüstriyel tasarımcıların erken aşama tasarım süreçlerine etkileri
Effects of the use of kansei engineering findings on early stages of industrial designers' design processes
MÜGE GÖKEN
Doktora
Türkçe
2024
Endüstri Ürünleri Tasarımıİstanbul Teknik ÜniversitesiEndüstriyel Tasarım Ana Bilim Dalı
DR. ÖĞR. ÜYESİ EKREM CEM ALPPAY