Geri Dön

Enrichment of residual UV filters in environmental samples by microextraction techniques prior to chromatographic analysis

Çevresel örneklerde kalıntı UV filtrelerinin kromatografik analiz öncesi mikroekstraksiyon teknikleriyle zenginleştirilmesi

  1. Tez No: 789088
  2. Yazar: CEMİLE YÜCEL
  3. Danışmanlar: PROF. DR. FATMA NİL ERTAŞ
  4. Tez Türü: Doktora
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: UV filtre, DLLME-SFOD, Electro-çekim, SPME, Atık su, Elektro çekim yöntemi, Elektrolif çekim, Endokrin bozucu kimyasallar, Filtreler, Morötesi ışınlar, Sıvı faz mikroekstraksiyonu, DLLME-SFOD, Endocrine Disrupter, SPME, Electrospinning, Waste water, Electro attraction method, Endocrine disrupting chemicals, Filters, Ultraviolet rays, Liquid phase microextraction
  7. Yıl: 2022
  8. Dil: İngilizce
  9. Üniversite: Ege Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Analitik Kimya Ana Bilim Dalı
  12. Bilim Dalı: Kimya Bilim Dalı
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

UV filtreler kişisel bakım ürünlerinde ve endüstriyel uygulamalarda kullanılmaktadır ve son zamanlardaki yaygın kullanımları çamur, toprak, su gibi çevresel örneklerde derişimlerinin artmasına neden olmuştur. Bu bileşiklerin endokrin bozucu özellikleri sucul yaşamı ve insan sağlığını olumsuz etkilemektedir. Bu tez kapsamında, UV filtrelerin atıksu ve yüzey sularından mikroekstraksiyon teknikleri ile zenginleştirilmesinden sonra GC MS/MS yönteminin uygulanabilirliği amaçlanmaktadır. Bu teknikler, daha az çözücü tüketilmesi ve daha az zamanın yeterli olması bakımından geleneksel yöntemlerden üstündür. Tezin ilk bölümünde, dispersif sıvı-sıvı mikroekstraksiyonu ile birleştirilmiş katılaşmış yüzen organic damlacık (DLLME-SFOD) metodu uygulanarak UV filtrelerin ekstraksiyonu gerçekleştirildi. Bunu takiben in-port türevlendirme ve gaz kromatografi-tandem kütle spektrometrisini (GC-MS/MS) birleştiren yeni, verimli, hızlı ve alternatif bir yöntem geliştirilmiştir. Optimum koşullar, yanıt yüzey yöntemi ile belirlenmiştir. Tezin ikinci bölümünde, UV filtrelerinin atık sudan SPME yöntemi ile ticari PA fiber kullanılarak ekstraksiyonu ve GC-MS/MS ile saptanabilirliği araştırılmıştır. Bu amaçla optimum koşullar belirlenmiş ve yöntem bu koşullar altında valide edilmiştir. Poliakrilonitril (PAN) lifinin elektroeğirme yöntemi ile kaplanması ve bu lifin atık su numunelerinde UV filtrelerinin seçici ekstraksiyonu ve analizi için kullanılması tezin üçüncü bölümünü oluşturmaktadır. SPME yönteminin validasyonu, PA fiberinin optimize edilmiş koşulları altında PAN fiber kullanılarak gerçekleştirilmiştir.

Özet (Çeviri)

UV filters are used in personal care products and in industrial applications and their wide use has led to an increase in their concentrations in environmental samples such as sludge, soil, and water. The endocrine disrupting properties of these compounds adversely affect aquatic life and human health. Within the scope of this thesis, the applicability of GC MS/MS method is aimed after enrichment of UV filters from wastewater and surface waters by microextraction techniques. These techniques are superior to conventional methods in that less solvent is consumed and less time is sufficient. In the first part of the thesis, the extraction of UV filters was carried out by applying the solidified floating organic droplet (DLLME-SFOD) method combined with dispersive liquid-liquid microextraction. Following this, a new, efficient, rapid and alternative method was developed combining in-port derivatization and gas chromatography-tandem mass spectrometry (GC-MS/MS). Optimal conditions were determined by the response surface method. In the second part of the thesis, the extraction of UV filters from wastewater by SPME method using commercial PA fiber and their detectability by GC-MS/MS were investigated. For this purpose, optimum conditions were determined and the method was validated under these conditions. Coating of polyacrylonitrile (PAN) fiber by electrospinning method and using this fiber for selective extraction and analysis of UV filters in wastewater samples constitute the third part of the thesis. Validation of SPME method was performed using PAN fiber under optimized conditions of PA fiber.

Benzer Tezler

  1. Demir ile zenginleştirilmiş doğal zeolitler ile sulu çözeltilerden metil violet giderimi

    Iron enrichment of natural zeolites for methyl violet removal from aqueous solutions

    AÇELYA ALSANCAK

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    KimyaSakarya Üniversitesi

    Kimya Ana Bilim Dalı

    DOÇ. DR. ESRA ALTINTIĞ

  2. The Analysis of platinum metals in platinum catalysts by thin layer chromotography

    İnce tabaka kromatografisi ile platin katalizörlerindeki platin metallerinin analizi

    MELEK MERDİVAN

    Doktora

    İngilizce

    İngilizce

    1994

    KimyaOrta Doğu Teknik Üniversitesi

    Kimya Ana Bilim Dalı

    DOÇ. DR. R. SEZER AYGÜN

  3. İçme sularından fosfor giderimi için yeni bir yöntem geliştirilmesi

    Development of new methods for phosphorus analysis in drinking water

    PINAR ÇETİN

    Yüksek Lisans

    Türkçe

    Türkçe

    2013

    Kimyaİstanbul Teknik Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. BİRSEN DEMİRATA ÖZTÜRK

  4. Malkara (Tekirdağ) kömürlerinin organik jeokimyası, ana-eser element içerikleri ve çevresel etkilerinin cbs destekli incelenmesi

    Gis-supported investigation of organic geochemistry, main-trace element contents and environmental effects of Malkara (Tekirdağ) coals

    CEVDET BERTAN GÜLLÜDAĞ

    Doktora

    Türkçe

    Türkçe

    2019

    Jeoloji MühendisliğiAkdeniz Üniversitesi

    Jeoloji Mühendisliği Ana Bilim Dalı

    PROF. DR. MEHMET ALTUNSOY

  5. Investıgatıng the effects of subcrıtıcal annealıng on mıcrostructure and resıdual stress state of carburızed pyrowear 53 (AMS 6308) steel

    Kritik altı tavlamanın karbürlenmiş pyrowear 53 (AMS 6308) çeliğinin mikroyapısı ve kalıntı gerilme durumu üzerindeki etkilerinin incelenmesi

    CEREN AYDIN

    Yüksek Lisans

    İngilizce

    İngilizce

    2026

    Metalurji MühendisliğiOrta Doğu Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. CEMİL HAKAN GÜR