Çinko atığı ile üretilen harçların özellikleri üzerine mermer atığının etkisi
The effect of marble waste on the properties of mortars produced with zinc waste
- Tez No: 794698
- Danışmanlar: PROF. DR. AHMET BİLGİL
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Niğde Ömer Halisdemir Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: İnşaat Mühendisliği Bilim Dalı
- Sayfa Sayısı: 122
Özet
Bu çalışmada, çevre sorunlarına neden olan çinko prosesi ve mermer atıklarının ürüne dönüştürülmesi ve inşaat sektöründe kullanılabilir hale getirilmesi amacıyla bu atıklardan geopolimer harç üretilmiştir. Çinko esaslı geopolimer harç üretimi iki gruba ayrılarak gerçekleştirilmiştir. Birinci grup geopolimer harçlarda, %100 çinko proses atığı ve çinko atığının %20, 30, 40 ve 50 ağırlığı oranında sodyum hidroksit ve sodyum silikat aktivatörleri kullanılmıştır. Bu grupta üretilen harçlara, 75, 100, 125, 150, 175 ve 200 oC kür uygulanmıştır. İkinci grup geopolimer harçlarda, birinci grubtan farklı olarak, çinko proses atığı yerine ağırlıkça %10, 20, 30, 40 ve 50 oranlarında mermer tozu atığı kullanılmıştır. Çinko proses atığı ve mermer tozu atığı ile üretilen geopolimer harçların fiziksel ve mekanik özellikleri belirlenmiştir. Birinci grupta, en yüksek mekanik özellikler %100 çinko proses atığı ve %40 sodyum hidroksit aktivatörü ile üretilen ve 100 oC kür sıcaklığı uygulanan numuneden elde edilmiştir. İkinci grupta, en yüksek mekanik özellikler, çinko proses atığı yerine %20 oranında mermer tozu atığı kullanılan ve %40 sodyum hidroksit aktivatörü ile üretilen ve 100 oC kür sıcaklığı uygulanan numuneden elde edilmiştir. Sonuç olarak, farklı oranlarda kullanılan mermer atığının, çinko proses atıklı geopolimer harçların mekanik özelliklerini olumsuz etkilediği görülmüştür.
Özet (Çeviri)
In this study, geopolymer mortar was produced from these wastes in order to convert the zinc process and marble wastes, which cause environmental problems, into products and make them usable in the construction industry. The production of zinc-based geopolymer mortar was carried out by dividing into two groups. In the first group of geopolymer mortar, 100% zinc process waste was used, and sodium hydroxide and sodium silicate activators were used at percent of 20, 30, 40 and 50 weight ratio of zinc waste. The mortars produced in this group were cured at santigrat degree of 75, 100, 125, 150, 175 and 200. Then their physical and mechanical properties were determined In the second group of geopolymer mortar -unlike the first group- percent of 10, 20, 30, 40 and 50 weight ratio of marble dust waste was used instead of zinc process waste. The physical and mechanical properties of geopolymer mortars that was produced with zinc process waste and marble dust waste were determined. In the first group, the highest mechanical properties were obtained from the sample which was produced with 100% zinc process waste and 40% sodium hydroxide activator and applied at 100 oC curing temperature. In the second group, the highest mechanical properties were obtained from the sample, which was produced with 40% sodium hydroxide activator and used 20% marble dust waste instead of zinc process waste, and applied a curing temperature of 100 oC. As a result, it was observed that the marble waste used in different proportions adversely affected the mechanical properties of the zinc process waste geopolymer mortars.
Benzer Tezler
- Çinko metal cürufunun uçucu kül esaslı geopolimer harçların mekanik ve mikroyapı özelliklerine etkisinin araştırılması
Investigation of the effect of zinc metal slag on the mechanical and micro structural properties of fly ash based geopolymer mortars
MEHMET ENGÜR
Yüksek Lisans
Türkçe
2024
Metalurji MühendisliğiNevşehir Hacı Bektaş Veli ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. ZAHİDE BAYER ÖZTÜRK
- Farklı tarımsal atıklardan üretilen biyocharların çeşitli fiziksel ve kimyasal özelliklerinin belirlenmesi
Determination of various physical and chemical characteristics of biochars produced from different agricultural wastes
ÖMER BAYRAM
Yüksek Lisans
Türkçe
2016
ZiraatGaziosmanpaşa ÜniversitesiToprak Bilimi ve Bitki Besleme Ana Bilim Dalı
PROF. DR. HİKMET GÜNAL
- RSM optimizasyonu ile çörekotu (Nigella Sativa L.) atık biyokütlesi-esaslı üretilen aktif karbon kullanılarak uçucu organik bileşiklerin giderilmesi ve fotovoltaik uygulamalarının incelenmesi
Examination of volatile organic compounds removal and photovoltaic applications using activated carbon derived from black cumin (Nigella Sativa L.) waste biomass through RSM optimization
EBRU BATUR
Yüksek Lisans
Türkçe
2021
Kimya MühendisliğiSiirt ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ SİNAN KUTLUAY
- Portakal posasından (Citrus sinensis L.) kimyasal aktivasyon ile aktif karbon üretiminde proses parametrelerinin etkisinin incelenmesi
Investigation by the effects of process parameters on the production of activated carbon by chemical activation from orange pulp (Citrus sinensis L.)
GÜLDEN DEMİR ÖZYILMAZ
Yüksek Lisans
Türkçe
2023
Gıda MühendisliğiSakarya ÜniversitesiGıda Mühendisliği Ana Bilim Dalı
PROF. DR. DİLEK ANGIN
- Portakal (Citrus sinensis L.) küspesinden üretilen aktif karbonun sulu çözeltilerden reaktif boyar madde adsorpsiyonunda kullanımı
Utilization of avtivated carbon produced orange (Citrus sinensis L.) pulp for adsorption of reactive dye from aqueous solution
SİNEM GÜNEŞ
Yüksek Lisans
Türkçe
2016
Gıda MühendisliğiSakarya ÜniversitesiGıda Mühendisliği Ana Bilim Dalı
DOÇ. DR. DİLEK ANGIN