Improving and modelling the flexural analysis of indeterminate reinforced concrete beams
Belirsiz betonarme kirişlerin eğme analizinin iyileştirilmesi ve modellenmesi
- Tez No: 798830
- Danışmanlar: PROF. DR. TUNCER ÇELİK
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2022
- Dil: İngilizce
- Üniversite: Altınbaş Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: İnşaat Mühendisliği Bilim Dalı
- Sayfa Sayısı: 68
Özet
Belirsiz kiriş analizinin yoğun ve üniform yükleme altında modellenmesi çalışmanın amacı olmuştur. Çalışma, her durum için geometrik ve yükleme koşullarını tanımladı ve ardından eğim sapması yöntemini kullanarak analiz yolunu oluşturdu. Sabit uç momentleri ve kiriş açıklıklarının uzunluğu ve yüklemenin büyüklüğü ve eklem durumları gibi diğer parametreleri içeren analiz adımları. çalışma, tüm bu parametreleri denkleme bağlar ve daha sonra her bir parametre ile ikinci eklemdeki moment arasındaki ilişkilere ve etki derecesine dayalı olarak etkin denklemler türetilir; bu, diğer iç momente erişimi kolaylaştıran iç momenti tanımlar ve kesme kuvvetlerinin yanı sıra eklem reaksiyonları. Çalışma, elde edilen denklemin daha etkili ve uygulanabilir olması için bilimsel yol boyunca birçok korelasyon ve kontrol aşaması yaptı. Elde edilen denklem iki ana durum için ele alınmıştır: birinci durum, her bir açıklık için yükün olduğu konsantre yük altında üç açıklığa sahip kiriştir. İkinci denklem, üniform yükleme altında üç açıklıklı belirsiz kiriş olduğu durum içindi. Ulaşılan moment değeri hem hesaplanan hem de türetilen durum için incelenmiştir. Fark o kadar küçüktü ki, türetilen modelin orijinal hesaplama adımlarına yaklaştığını gösteriyordu. Örnekler için simülasyon, geometrik şekil ve yükleme durumunun çizildiği ve sonlu elemanlar tekniği altında analiz edildiği ANSYS programı kullanılarak yapılmıştır. ANSYS tarafından ulaşılan momentin büyüklüğü, simülasyonun, yön deformasyon durumu, eğilme momentleri ve kesme kuvvetleri dahil olmak üzere açıklıklar boyunca iç kuvvet değişimi için görsel görüntüler gösterdiği türetilen şekilde tatmin olmuştur. Kesme kuvveti ve eğilme momenti diyagramı da ANSYS programı ile anlatılmıştır.
Özet (Çeviri)
The modeling of the indeterminate beams analysis under concentrated and uniform loading was the aim of the study. The study defined the geometrical and loading conditions for each case then built its analysis pathway by using the method of slope deflection. The analysis steps including the fixed end moments and the other parameters like the length of beam spans and the magnitude of loading and the cases of joint. the study links all these parameters into equation then derived effective equations based on the relationships and the degree of impact between each parameter and the moment at the second joint which used to be the initial identifies internal moment that ca ease the reach to the other internal moment and the shear forces as well as the joint reactions. The study made number of correlation and checking stages during the scientific path to make the resultant equation be more effective and applicable. The equation obtained considered for two main cases: the first case was the beam with three spans under concentrated load in which load for each span. The second equation was for the case that three spans indeterminate beam under uniform loading. The value of moment reached were examined for both the calculated and the derived state. The difference was so small indicating the closing of the deriving model to the original steps of calculation. The simulation for the cases was done by using ANSYS program which the geometrical shape and loading condition were drawn then analysed under the finite element technique. the magnitude of the moment reached by ANSYS was so satisfied that derived in which the simulation shows visual images for the internal force variation along the spans including the state of directional deformation, the bending moments, and the shear forces. The shear force and bending moment diagram were explained also by ANSYS program.
Benzer Tezler
- Nonlinear finite element modeling of post tensioned cantilever concrete beams using different tendon profiles
Farkli profillere sahip ard germeli betonarme konsol kirişlerin doğrusal olmayan sonlu elemanlar analizi
AWAT HASSAN FAQE NABI FAQE NABI
Yüksek Lisans
İngilizce
2017
İnşaat MühendisliğiGaziantep ÜniversitesiMekanik Ana Bilim Dalı
DOÇ. DR. NİLDEM TAYŞİ
- An experimental and numerical study on the effects of nanoadditives and material extrusion parameters on the mechanical and flexural characteristics of ABS/PVC blend polymer core sandwich panels
ABS/PVC karışık polimer çekirdekli sandviç panellerin mekanik ve eğılme karakteristikleri üzerine nano katkı maddeleri ve malzeme ekstrüzyon parametrelerinin deneysel ve sayısal incelemesi
DENİZ GÜRAY GENCAY
Yüksek Lisans
İngilizce
2023
Makine MühendisliğiAdana Alparslan Türkeş Bilim Ve Teknoloji ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MIRSADEGH SEYEDZAVVAR
PROF. DR. CEM BOĞA
- Simulation and modeling of flexural behavior in concrete beam under different loading shapes
Başlık çevirisi yok
AHMED AL-ALI
Yüksek Lisans
İngilizce
2022
İnşaat MühendisliğiAltınbaş Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. TUNCER ÇELİK
- Doğal lif takviyeli kompozitlerde lif / matris ara yüzey iyileştirme çalışmaları ve çevresel koşullara göre karakterizasyonu
Fiber / matrix interfacial improvement techniques and characterization due to environmental conditions for natural fiber reinforced composites
MEHMET SAFA BODUR
Doktora
Türkçe
2016
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. MUSTAFA BAKKAL
- Tekrarlı yükler etkisindeki bölme duvarların çimento esaslı tekstil kompozitlerle iyileştirme yöntemlerinin geliştirilmesi
Improving retrofitting methods for partition walls under lateral cyclic loading using cement based textile composites
DİDEM DÖNMEZ
Doktora
Türkçe
2021
Deprem Mühendisliğiİstanbul Teknik ÜniversitesiDeprem Mühendisliği Ana Bilim Dalı
DOÇ. DR. MUSTAFA GENÇOĞLU