Betonarme binalarda perde boyut ve yerleşiminin yapay arı kolonisi algoritması ile optimizasyonu
Optimization of dimension and placement of the shear walls in reinforced concrete buildings by using artificial bee colony algorithm
- Tez No: 803691
- Danışmanlar: PROF. DR. MEHMET KARATAŞ
- Tez Türü: Doktora
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Fırat Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 129
Özet
Son yıllarda yapıların tasarımında performans kavramının öne çıkmasıyla, dayanıma göre tasarımın yanında şekil değiştirme esasına göre tasarım ilkeleri de önem kazanmıştır. Yapı güvenliği ve aşırı deplasmanların önlenmesine yönelik daha pratik yaklaşımlar sunan şekil değiştirmeye göre tasarım, yapıların yaptığı özellikle yatay deplasmanlar nedeniyle elemanların aldığı hasarların sınırlandırılmasını amaçlar. Kesit hasar sınırları yönetmelikçe ortaya konularak, yapının deplasman seviyesine göre performans sınıfları belirlenir. Bu tür yaklaşımlarda yapıda gerekli rijitliği sağlayarak fazla deplasmanların önlenmesini sağlayan en önemli elemanlardan biri perde elemanlardır. Tasarım sırasında gerekli rijitliği sağlayan, bina güçlendirmede ise az maliyetli ve kolay uygulanabilir yöntemlerden olan perde tasarımının, her projede istenen performansı sağlayacak şekilde en düşük maliyetle uygulanması amaçlanmalıdır. İstenen deplasman düzeyini sağlayan ve burulmaya neden olmayan perde yerleşimiyle ilgili, genel kriterler olmakla birlikte en ekonomik çözümün aranması gereklidir. Muhtemel onlarca seçeneğin karşılaştırılması uzun süreler alacağından optimizasyon yöntemleri kullanarak istenen performansı sağlayan en ekonomik çözüm tespit edilmelidir. Bu sebeple bu çalışmada“Yapay Arı Kolonisi Algoritması”(YAK) kullanılarak binaya uygulanacak perdelerin yerleşiminin tespiti için“Ekonomik Perde Yerleşim Optimizasyonu”(e-PYO) adlı Visual Basic tabanlı bir program üretilmiştir. Program algoritmasına göre; muhtemel tüm çözümler taranarak, makul çözümler arasından en düşük maliyetli çözümü bulmak amacıyla, YAK algoritması ile seçilen perde kombinasyonları binanın SAP2000 modeline işlenerek X ve Y yönlerindeki kat deplasmanları üzerinden binanın performansı incelenerek optimizasyon yapılmaktadır. Seçilen perde kombinasyonları SAP2000'in“Açık Uygulama Programlama Arayüzü”(Open Application Programming Interface, OAPI) modülü ile modele işlenmekte ve analiz sonrası veriler okunmaktadır. Program perde yerleşimlerini aks sistemine bağlı olarak yapmakta olup en fazla her iki yönde 10 aksa sahip yapılara her iki yönde en fazla 9'ar adet perde yerleşimi yapabilmektedir. Bu çalışmada Sağlık Bakanlığı'na ait perde içermeyen tip hastane binası incelenmiş ve istenen performans düzeyi için gerekli perde duvarların yerleşimi tespit edilmiştir. Üretilen algoritma ile, tüm yerleşim alternatifleri taranarak en uygun perde yerleşimi kombinasyonunun hızlı bir biçimde tespit edilebildiği görülmüştür.
Özet (Çeviri)
In recent years, with the prominence of the concept of performance in the design of buildings, design principles based on deformation have gained importance as well as design according to strength. Design according to deformation, which offers more practical approaches for building safety and prevention of excessive displacements, aims to limit the damages of the elements due to the horizontal displacements. The section damage limits are set by the regulation and the performance classes are determined according to the displacement level of the structure. In such approaches, one of the most important elements that provide the necessary rigidity in the structure and prevent excessive displacements is the shear walls (SW). It should be aimed to implement the SW design, providing the rigidity during the design and as being one of the low-cost and easy-to-apply methods in building retrofitting, at the lowest cost in a way to provide the desired performance in each project. Although there are general criteria for SW placement that provides the desired displacement level and does not cause torsion, it is necessary to search for the most economical solution. Since the comparison of dozens of possible options will take a long time, the most economical solution should be determined by using optimization methods. For this reason, in this study, a Visual Basic program called“Ekonomik Perde Yerleşim Optimizasyonu”(e-PYO) was produced to determine the placement of the SW's by using the“Artificial Bee Colony Algorithm”(ABC). According to the program algorithm; By scanning all possible solutions, in order to find the lowest cost among the reasonable solutions, SW combinations selected with the ABC algorithm are applied to the SAP2000 model, and the building performance is examined over the floor displacements in X&Y directions. Selected SW combinations are applied to the model with the“Open Application Programming Interface”(OAPI) module of SAP2000 and the data is read. The program makes SW placements depending on the axis system and can place a maximum of 9 SWs in both directions for structures with a maximum of 10 axes in both directions. In this study, a typical hospital building without SWs belonging to the Ministry of Health was examined and the placement of the SW's necessary for the required performance level was determined. It has been observed that the most suitable SW placement combination can be determined quickly by scanning all layout alternatives with the generated algorithm.
Benzer Tezler
- Perde boyut oranı değişiminin perdeler ve çerçeve arasında kesme kuvveti dağılımına etkisi
The Effectiveness of shear-wall size rate changing the cutting force distribution
VEYSEL AKYÜNCÜ
Yüksek Lisans
Türkçe
2002
İnşaat MühendisliğiSakarya Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. HÜSEYİN KASAP
- Betonarme yapıların taşıyıcı sistem seçiminde perde yerleşiminin davranışa etkisi.
Effect of wall geometry to structural behaviour in reinforced conrete buildings.
SİNAN ERKEN
Yüksek Lisans
Türkçe
2012
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. TÜLAY AKSU ÖZKUL
- Betonarme perde ve çerçeveli yapılarda perde boyutlandırması ve yerleşiminin deprem davranışına etkisi
The effect of reinforced concrete shear wall dimensions and configuration on seismic behavior of frame-shear wall structures
GÖKHAN KAYA
Yüksek Lisans
Türkçe
2018
İnşaat MühendisliğiBeykent Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. AYŞE ELİF ÖZSOY ÖZBAY
- TBDY-2018'e göre tasarlanmış planda A1 ve A3 düzensizliği bulunan betonarme bir binanın performans analizi
Performance evaluation of a RC building with A1 and A3 plan irregularities designed according to TBDY-2018
MELİH MUHLİS TEMİZ
Yüksek Lisans
Türkçe
2022
İnşaat MühendisliğiBursa Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MELİH SÜRMELİ
- Deprem bölgelerindeki prefabrike betonarme endüstri binaların yapısal sistemlerinin değerlendirilmesi ve eğimli çatı kirişleri için alternatif tasarımlar
Overview of structural systems of prefabricated/precast concrete industrial buildings in seismic regions and alternative designs for sloped roof beams
SELİN KOCA
Yüksek Lisans
Türkçe
2023
Mimarlıkİstanbul Teknik ÜniversitesiMimarlık Ana Bilim Dalı
PROF. DR. OĞUZ CEM ÇELİK