Çift yarıklı nozul tasarımı ve gaz atomizasyon metodu ile metal tozu üretimi
Metal powder production by gas atomization method and double slit nozzle design
- Tez No: 805908
- Danışmanlar: DR. ÖĞR. ÜYESİ HAKAN BURAK KARADAĞ
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Necmettin Erbakan Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 77
Özet
Bu çalışmada, gaz atomizasyon metodu ile AA1070 (Etial-7) kalite saf alüminyum metali atomize edilmiştir. Gaz atomizasyon verimliliğini artırmak ve daha dar bir toz dağılımını gerçekleştirmek için hem sonik hem de süper sonik bölgeye sahip bir çift yarıklı nozul tasarlanmıştır. Bilindiği üzere nozul geometrisi toz boyutu ve dağılımını birinci dereceden etkilemektedir. Bu yapılan çalışmada özgün olarak tasarladığımız çift yarıklı nozulun üç ana problemi çözebileceği düşünülmüştür. Bunlardan ilki, sonik bölgeden düşük basınç ve hızda çıkan gazın sıvı metal viskozitesini kontrol ederek atomizasyon bölgesine iletilmesine katkıda bulunmak ve daha küçük küresel tanelerin oluşumuna yardımcı olmak. İkincisi, yakından eşlemeli sistemlerin en büyük sorunlarından olan metal akış borusu ucundaki katılaşma sorununu ve pozitif basınç oluşumunu ortadan kaldırmak. Üçüncüsü ise, süpersonik nozul geometrisiyle de kapalı geçiş bölgesi de denilen gaz genleşme bölgesinin basıncının sabit tutularak kapanmasını önlemektir. Gaz atomizasyon sistemine entegre edilen çift yarıklı nozul ile üretim parametrelerini (gaz basıncı, ergitme sıcaklığı, akış borusu çapı vb.) optimize edilerek katma değeri yüksek alüminyum metal tozları üretilmiştir. Çalışma sonunda optimum verimlilik için 35 bar basınçta argon gazı, 830 °C ergime sıcaklığı ve 3 mm akış borusu kullanılarak yapılan çalışmada üretilen tozların ortalama tane büyüklüğü 25,4 mikron ve toz şeklinin ise 97% oranında küresel olduğu görülmüştür.
Özet (Çeviri)
In this study, AA1070 (Etial-7) quality pure aluminum metal was atomized by gas atomization method. A double-slit nozzle with both a sonic and a supersonic region has been designed to improve the gas atomization efficiency and realize a narrower dust distribution. As is known, the nozzle geometry affects the first-order dust size and distribution. In this study, it was thought that the double slit nozzle that we originally designed could solve three main problems. The first of these is to contribute to the transmission of gas from the sonic region to the atomization region at low pressure and speed by controlling the viscosity of the liquid metal and to help the formation of smaller spherical grains. Secondly, to eliminate the solidification problem and the formation of positive pressure at the metal flow pipe end, which is one of the biggest problems of closely matched systems. The third is to prevent the closure of the gas expansion zone, also called the closed transition zone, by keeping the pressure constant with the supersonic nozzle geometry. With the double slit nozzle integrated into the gas atomization system, we can calculate the production parameters (gas pressure, melting temperature, flow pipe diameter, etc.) by optimizing, aluminum metal powders with high added value have been produced. At the end of the study, it was determined that the average grain size of the powders produced in the study using argon gas at a pressure of 35 bar, a melting temperature of 830 °C and a 3 mm flow pipe for optimal efficiency was 25,4 microns and the powder shape was spherical by 97%.
Benzer Tezler
- Design of dual aperture coupled antenna and offset slot fed aperture coupled microstrip antenna
Çift yarıklı kuplaj anten tasarımı ve kaydırılmış açıklıklı mikro şerit anten tasarımı
MERVE GÜNAY
Yüksek Lisans
İngilizce
2012
Elektrik ve Elektronik MühendisliğiYeditepe ÜniversitesiElektrik ve Elektronik Mühendisliği Bölümü
DOÇ. DR. KORKUT YEĞİN
DOÇ. DR. CAHİT CANBAY
ÖĞR. GÖR. DENİZ PAZARCI
- NACA0015 kanat profili üzerinde çift yarıklı koordineli jet aktüatör ile aktif akış kontrolünün deneysel ve sayısal incelenmesi
Experimental and numerical investigation of active flow control by coordinately jet actuator with dual slot on NACA0015 airfoil
FATİH SONKAYA
Yüksek Lisans
Türkçe
2019
Havacılık Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ SERTAÇ ÇADIRCI
DR. ÖĞR. ÜYESİ DUYGU ERDEM
- A study on dual-band reflectarray antennas and reconfigurable terahertz delay lines using NEMS switches
Çift bantlı yansıtıcı dizi anten ve NEMS anahtarları kullanılarak ayarlanabilir terahertz gecikme hatları tasarımı
TUĞBA KEMİKSİZ
Yüksek Lisans
İngilizce
2019
Elektrik ve Elektronik MühendisliğiAnkara Yıldırım Beyazıt ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. MEHMET ÜNLÜ
- Oxidation state related evaluation of tellurium determination by flame AAS and use of slotted silica trap
Alevli AAS ile tellür tayininde değerlikle ilgili değerlendirme ve yarıklı silika tuzağının kullanımı
HÜSEYİN BEKİR YILDIZ
Yüksek Lisans
İngilizce
2002
KimyaOrta Doğu Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF.DR. O. YAVUZ ATAMAN
- Development of sensitive analytical methods for bismuth determination by atomic spectrometric techniques
Atomik spektrometrik teknikler ile bizmut tayini için duyarlı analitik yöntemlerin geliştirilmesi
ERSİN KILINÇ