Numerical analysis of electromagnetic convection for single crystalsic growth by top seeded solution growth (TSSG) technique
Başlık çevirisi mevcut değil.
- Tez No: 839115
- Danışmanlar: DR. RODNEY HERRİNG
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2022
- Dil: İngilizce
- Üniversite: University of Victoria
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 53
Özet
Top-Seeded Solution Growth (TSSG) is a very effective single crystal growth process that is working based on the Czochralski method. In this growth technique, there is a seed crystal that is dipped into the melt of the same material at a high temperature. It has a boundary between the seed crystal and melt where growth occurs. This boundary is highly affected by the fluid flow. Controlling the fluid flow is the key feature of the TSSG technique. Many advanced materials can be obtained by this method. Silicon Carbide (SiC) studied in this thesis is one of the advanced materials that shows semiconductor properties. Because of this attribute, SiC is widely used in the electronics industry. In this thesis, different convection mechanisms are investigated for SiC single-crystal growth with the TSSG technique. Since the graphite crucible is the only source of carbon atoms in the system, transportation of carbon atoms from the crucible walls to the seed crystal is needed for efficient growth. To maintain this transportation, the silicon melt is induction coupled by electromagnetic coils. Controlling the fluid flow is maintained with electromagnetic forces which are generated by the coils in the TSSG furnace. Respectively, a numerical study has been conducted to determine the electromagnetic forces in the silicon melt. Also, the distribution of electromagnetic forces in the silicon melt is analyzed. Effects of different working frequencies are described. Results are compared to the buoyancy body forces in the system. To overcome buoyancy forces in the system, the needed amount of electromagnetic forces is explained.
Özet (Çeviri)
Özet çevirisi mevcut değil.
Benzer Tezler
- Transformatörlerde kaçak akı kayıplarının incelenmesi ve şönt eleman ekranlaması ile kayıpların azaltılması analizi
Investigation of stray losses on transformer and analysis of tank losses reduction with shunt elements
AYÇA AGIÇ
Yüksek Lisans
Türkçe
2024
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
PROF. DR. GÜVEN KÖMÜRGÖZ KIRIŞ
- Değişken rezolüzyonlu görüntü örnekleyici
Multi resolution image sampler
RIZA CAN TARCAN
Yüksek Lisans
Türkçe
1991
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiY.DOÇ.DR. M. SAİT TÜRKÖZ
- Generalized scattering matrix techniques for hybrid solutions of radiowave propagation problems
Radyodalgası yayılımı problemlerinin hibrit çözümlerine uygun genelleştirilmiş saçılma matrisi yöntemleri
ALİCAN UYSAL
Doktora
İngilizce
2024
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektronik ve Haberleşme Mühendisliği Ana Bilim Dalı
PROF. DR. FUNDA AKLEMAN YAPAR
- Piezoelektrik tutucunun dizayn ve analizi
The design and analysis of piezoelectric gripper
SEMİH SEZER
Yüksek Lisans
Türkçe
1998
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. HİKMET KOCABAŞ
- Silindirik sargılı transformatörlerde alan dağılımının sonlu elemanlar metodu ile hesabı
Computation of transformer leakage flux based on the finite element method
DİLEK YILDIZ
Yüksek Lisans
Türkçe
1991
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiPROF.DR. NURDAN GÜZELBEYOĞLU