Geri Dön

Radyo dalgalarından alınan sinyal güç göstergesi (RSSI) değeri ile konum belirleme doğruluğunun incelenmesi

Investigation of positioning accuracy based on received signal strength indicator (RSSI) values from radio waves

  1. Tez No: 847359
  2. Yazar: SEYİT ALİ GÜLBAĞ
  3. Danışmanlar: PROF. DR. EKREM TUŞAT
  4. Tez Türü: Yüksek Lisans
  5. Konular: Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrol, Elektrik ve Elektronik Mühendisliği, Jeodezi ve Fotogrametri, Computer Engineering and Computer Science and Control, Electrical and Electronics Engineering, Geodesy and Photogrammetry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2024
  8. Dil: Türkçe
  9. Üniversite: Konya Teknik Üniversitesi
  10. Enstitü: Lisansüstü Eğitim Enstitüsü
  11. Ana Bilim Dalı: Harita Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 146

Özet

ABD tarafından GPS'in geliştirilmesi ve sivil kullanıma açılması birlikte, dünya genelinde konum belirleme sistemlerine sahip olmanın stratejik ve ticari önemi birçok ülke tarafından fark edilmiştir. Bu durum, günümüzde bölgesel veya küresel çapta faaliyet gösteren çeşitli uydu tabanlı konum belirleme sistemlerinin ortaya çıkmasına ve kullanımının artmasına neden olmuştur. Fakat bu sistemlerinin en büyük dezavantajı konum belirlenirken uydu ile yeryüzünde bulunan kullanıcı arasında görüş açıklığı bulunması gerekliliğidir. Yani bu sistemler kullanılırken uydular ile yeryüzünde bulunan alıcı arasında bulunan bir engel (ağaç, duvar vs.) sistemin kullanımını büyük ölçüde engelleyebilmektedir. Bu nedenle, yeraltı ve kapalı alanlarda konum belirleme ihtiyacını karşılamak amacıyla alternatif sistemler ve yöntemler geliştirilmektedir. Bu yöntemlerden biri de RSSI değeri ile konum belirlemedir. Bu çalışma ile RSSI değeri ve makine öğrenmesi algoritmaları kullanılarak kapalı mekanlarda konum belirleme ve elde edilen konumun doğruluğunun incelenerek arttırılması yönünde araştırmalar yapılmıştır. Çalışmada konum belirleme yöntemi olarak Trilaterasyon ve Parmak İzi (ing:Fingerprint) yöntemleri kullanılmıştır. Trilaterasyon yönteminin en büyük dezavantajı olan referans noktaların yerleşim geometrisinin hesaplanan konum doğruluğuna etkisi sebebi ile çalışmada kullanılan referans RF verici istasyonları deney sahasına iki farklı geometride yerleştirilmiştir. Her iki geometri için deney sahasına homojen olarak yayılan noktalarda RSSI ve konum değerleri ölçülmüş olup makine öğrenmesi tabanlı regresyon modelleri için eğitim verisi toplanarak veri setleri oluşturulmuştur. Ayrıca toplanan bu eğitim verilerinde RSSI değerleri 10 epok ölçülerek istatiksel yöntemler ile filtrelemeye tabi tutulmuştur. Bu sayede çevresel etkilerden dolayı hatalı olabilecek RSSI ölçümleri elemine edilmeye çalışılmıştır. Bu eğitim verileri ile eğitilen modellerin geliştirilen bir algoritma ile hiper parametre optimizasyonu sağlanarak eğitim verisine uyumu arttırılmaya çalışılmıştır. Bu sayede çalışmada kullanılan her bir modelden en yüksek performansın alınması amaçlanmıştır. Parametreleri ayarlanan modellerden en yüksek doğruluğa sahip olanları seçilmiş ve hazırlanan mobil uygulamaya eklenerek uygulama sahasında her iki geometri için gerçek zamanlı testler yapılmıştır. Testler sonucunda elde edilen mesafe ve konum değerleri için EKK yöntemi ile dengeleme yapılarak elde edilen konum doğruluğunun arttırılmasına yönelik yöntemler araştırılmıştır. Sonuç olarak elde edilen en yüksek konum doğruluğu değerlerini veren yöntem seçilerek uygulama sahası için RSSI ile konum belirlemeye yönelik sistemin parametreleri önerilmiştir. Seçilen çalışma sahasının gerçek dünya koşullarına benzer şekilde kapalı, görüş açısının kısıtlı ve fiziki engeller içermesi sebebiyle, geliştirilen yöntemin gerçek uygulama alanlarında da başarıyla uygulanabileceği düşünülmektedir.

Özet (Çeviri)

With the development and civilian deployment of GPS by the United States, many countries around the world have realized the strategic and commercial importance of having positioning systems. This has led to the emergence and increased use of various satellite-based position systems operating on a regional or global scale. However, the biggest disadvantage of these systems is the need for a clear line of sight between the satellite and the user on the ground. In other words, when using these systems, an obstacle (tree, wall, etc.) between the satellites and the receiver on the ground can greatly hinder the use of the system. For this reason, alternative systems and methods are being developed to meet the need for positioning in underground and confined spaces. One of these methods is positioning with RSSI. In this study, experiments have been carried out to determine the location in confined spaces using RSSI value and machine learning algorithms and to examine and improve the accuracy of the obtained position. In the study, Trilateration and Fingerprint methods were used as positioning methods. Due to the biggest disadvantage of the trilateration method, which is the effect of the placement geometry of the reference points on the calculated position accuracy, the reference RF transmitter stations used in the study were placed in two different geometries in the experimental field. For both geometries, RSSI and coordinate values were measured at points spread homogeneously over the experimental field and training data were collected and data sets were created for machine learning based regression models. In addition, RSSI values were measured with 10 epoch measurements and filtered with statistical methods. In this way, RSSI measurements that may be inaccurate due to environmental effects were tried to be eliminated. The models trained with this training data were hyper parameter optimized with an algorithm developed to increase the fit to the training data. In this way, it is aimed to obtain the highest performance from each model used in the study. The models with the highest accuracy were selected from the models whose parameters were adjusted and added to the prepared mobile application and real-time tests were performed for both geometries in the application area. For the distance and cooridnate values obtained as a result of the tests, methods to increase the position accuracy obtained by balancing with the EKK method were investigated. As a result, the method that gives the highest position accuracy values is selected and the parameters of the system for positioning with RSSI are proposed for the application area. It is thought that the developed method can be successfully applied in real application areas since the selected study area is closed, has limited visibility and physical obstacles similar to real world conditions.

Benzer Tezler

  1. Yeni Cami'nin akustik açıdan performans değerlendirmesi

    Evaluation of the acoustical performance of the New Mosque

    EVREN YILDIRIM

    Yüksek Lisans

    Türkçe

    Türkçe

    2003

    Mimarlıkİstanbul Teknik Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. SEVTAP YILMAZ DEMİRKALE

  2. Digital Background Calibration for Capacitor Mismatch and Gain Errors in Pipeline ADCs

    Kapasitör Uyumsuzluğu ve Kazanç Hataları İçin Arka Plan Sayısal Kalibrasyonu

    ENVER DERUN KARABEYOĞLU

    Yüksek Lisans

    İngilizce

    İngilizce

    2019

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektronik-Haberleşme Eğitimi Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ TUFAN COŞKUN KARALAR

  3. On the performance of cooperative diversity with amplify-and-forward relays over weibull fading channels

    İşbirlikli kablosuz haberleşme için kuvvetlendir-ve-aktar tipi weibull sönümleme kanalı üzerinden performans analizi

    BAKARY GUINDO

    Yüksek Lisans

    İngilizce

    İngilizce

    2018

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektronik ve Haberleşme Mühendisliği Ana Bilim Dalı

    PROF. DR. AHMET HAMDİ KAYRAN

  4. Radyo dalgaları kullanarak yeraltı maden ocağında çalışan madencilerin izlenmesi

    Monitoring of miners in underground mines by using radio waves

    TUĞBA SARAY

    Yüksek Lisans

    Türkçe

    Türkçe

    2017

    Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolKTO Karatay Üniversitesi

    Elektrik ve Bilgisayar Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. ŞEKİP ENGİN MENDİ

  5. Darbant ve genişbant sanal iyonosonda için sinyal işleme teknikleri

    Signal processing techniques for narrowband and wideband virtual ionosonde

    MEHMET KABASAKAL

    Doktora

    Türkçe

    Türkçe

    2018

    Elektrik ve Elektronik MühendisliğiHacettepe Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. CENK TOKER