Betonarme çerçeveli ve çerçeveli perdeli taşıyıcı sistemli hastane binalarında deprem ve düşey yüklerden meydana gelen kolon eksenel kuvvet oranlarının tespiti
Determination of column axial force ratios caused by earthquakes and vertical loads in hospital buildings with reinforced concrete frame and frame curtain carrier system
- Tez No: 892797
- Danışmanlar: PROF. DR. İBRAHİM EKİZ
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2024
- Dil: Türkçe
- Üniversite: Fatih Sultan Mehmet Vakıf Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: İnşaat Mühendisliği Bilim Dalı
- Sayfa Sayısı: 455
Özet
Depremler tüm dünyada insanların maddi, ruhi, psikolojik olarak etkileniyorlar. Türkiye coğrafi olarak aktif fay hatların üstüne olduğundan dolayı depremler meydana geldi, bu hasarların azatltması için bazı kurallar oluşturdular ve bu amacıyla deprem yönetmeliği yazılmıştır. Yapılarda taşıyıcı sistemin doğru düzenlenmesi, taşıyıcı elemanların boyutlandırılması ve yerleşimi, yapının deprem davranışını önemli derecede etkilemektedir. Bu tezde amaç deprem kuvveti etkisi altında betonarme çerçeveli, çerçeveli perdeli ve perdelerlerin konum değiştirmesiyle taşıyıcı sistemli hastane binalarında deprem ve düşey yüklerden meydana gelen eksenel kuvvetleri incelenmiştir. Bu amaç için betonarme çerçeveden oluşan bir hastane binasının izmir, İstanbul,ankara illerinde, çeşitli zemin sınıflarda ve 6, 9, 12 katlı olduğu kabulü yapılarak, ve tek tek durumlar için ayrı ayrı ele alınarak hesaplamaları yapılmıştır.
Özet (Çeviri)
The gross cross-sectional area of the columns is calculated according to TBDY 2018, satisfying the condition Ac ≥ Ndm/0.4fck. The axial compressive force Ndm used in this calculation is defined as the maximum axial compressive force resulting from the combined effect of the dead load G, the reduced live load Q, and the earthquake effect E, calculated under the combination of G + Q + E. While the axial compressive force caused by vertical loads can be easily calculated, the axial force caused by the earthquake effect is calculated only after the system is sized. In this thesis, approximate values have been determined before entering into the sizing calculations to determine the axial forces arising from vertical loads and earthquake loads in non-shear and different shear reinforced concrete columns. For this purpose, specific ratios (kP, kE) have been determined for vertical loads. These ratios, multiplied by the combined effect of vertical loads G + Q, provide an approximate calculation of the axial forces in the columns under earthquake effect, thus facilitating the sizing calculations. The thesis consists of four chapters. In the first chapter, an introduction to the subject is provided, along with information about the purpose and scope of the study. The First chapter explains in detail how the necessary parameters for calculating the base shear force using the Equivalent Seismic Load Method in accordance with the updated seismic regulation are obtained. In the second and third chapter, the design of a hospital building, assumed to be 6, 9, and 12 storeys high, without shear walls and with different shear walls, is carried out to determine the ratios aimed at the objective of the thesis for three different seismic points and five different soil classes. In this process, tasks such as preliminary sizing, determining earthquake parameters, and calculating base shear force were carried out. Additionally, axial forces caused by vertical loads and earthquake loads in the columns were calculated based on the given information. In the Result chapter presents the coefficients obtained from the calculations (kP for vertical loads, kE for earthquake loads) for 6, 9, and 12-story hospital buildings without and with shear walls for three different seismic points and five different soil classes.
Benzer Tezler
- Design and seismic performance evaluation of rc high-rise building according to Turkish seismic code 2018
Betonarme yüksek bir binanın TBDY 2018'e göre tasarımı ve deprem performansının incelenmesi
ALI BEHROZ FRAIDOON
Yüksek Lisans
İngilizce
2020
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. KADİR GÜLER
- Çerçeve ve perdeli taşıyıcı sistemli betonarme yapılarda maliyet ve performans karşılaştırılması
Cost and performance comparison of structures with reinforced concrete frames and walls
ENSAR HIDIROĞLU
Yüksek Lisans
Türkçe
2017
İnşaat MühendisliğiAvrasya Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. BASRİ ERTAŞ
- Alternatif betonarme taşıyıcı sistemler açısından binaların enerji performans analizi
Energy performance analysis of buildings in terms of alternative reinforced concrete structural systems
BERKAY AYDOĞDU
Yüksek Lisans
Türkçe
2022
EnerjiFırat ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA İNALLI
- 2007 Deprem Yönetmeliği'ne göre mevcut bir yapının performansının belirlenmesi ve bir güçlendirme önerisi
Seismic performance evaluation of an existing structure in accordance with Turkish Seismic Design Code 2007 and a strengthening suggestion
CİHAT YILDIRIM
Yüksek Lisans
Türkçe
2008
Deprem MühendisliğiYıldız Teknik Üniversitesiİnşaat Mühendisliği Bölümü
DOÇ. DR. MUSTAFA ZORBOZAN
- Seismic performance evaluation of dual reinforced concrete systems design according to turkish seismic code 2007
Süneklik düzeyi bakımından karma taşıyıcı betonarme sistemlerin 2007 deprem yönetmeliği'ne göre performans değerlendirmesi
E. YEŞİM KARCI
Yüksek Lisans
İngilizce
2007
Deprem MühendisliğiBoğaziçi ÜniversitesiDeprem Mühendisliği Ana Bilim Dalı
PROF. DR. NURAY AYDINOĞLU