CuO ve ZnO nanopartiküllerinin gürgen yapraklı kayacık (Ostrya carpinifolia Scop.) tohumlarının çimlenme parametreleri üzerine etkilerinin incelenmesi
Investigation of the effects of CuO and ZnO nanoparticles on germination parameters of european hophornbeam (Ostrya carpinifolia Scop.) seeds
- Tez No: 906485
- Danışmanlar: PROF. DR. HALİL BARIŞ ÖZEL
- Tez Türü: Yüksek Lisans
- Konular: Ormancılık ve Orman Mühendisliği, Forestry and Forest Engineering
- Anahtar Kelimeler: Kapalı tohumlular, Nanopartiküller, Tohum çimlenmesi, Angiospermous, Nanoparticles, Seed germination
- Yıl: 2024
- Dil: Türkçe
- Üniversite: Bartın Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Orman Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Gürgen Yapraklı Kayacık (Ostrya carpinifolia Scop.) türünün Bartın, Düzce, Sinop, Adana ve Erzurum orijinlerinden toplanan tohumlarının, ortam kirliliğinde yaygın olarak etkili olan CuO ve ZnO nanopartiküllerinin 4 farklı dozunda (400 mg/l, 800 mg/l, 1200mg/l ve 1600mg/l) hazırlanan konsantrasyonları ile işleme alınmasından sonra çimlenme yüzdesi ve çimlenme hızı değişkenleri üzerindeki etkilerinin incelendiği bu özgün araştırmada; CuO nanopartikülüne ait 4 farklı doz konsantrasyon ile kontrol numunesi tohumlar arasında çimlenme yüzdesi yönünde uygulanan varyans analizinde P˂0,05 güven düzeyinde istatistiki açıdan önemli farklılığın ortaya çıktığı belirlenmiş ve bu kapsamda homojen grupları belirlemek amacıyla %95 güven düzeyinde gerçekleştirilen Duncan Testi sonucunda birinci grubu %35,79 çimlenme yüzdesi ile kontrol grubunun ve son grubu ise %18,26 çimlenme yüzdesi ile 4. doz değerindeki CuO nanopartikül uygulamam grubunun oluşturduğu belirlenmiştir. Yine CuO nanopartikülünde çimlenme hızı yönünden kontrol grubu tohum numuneleri ile nanopartikül doz uygulamam grupları arasında P˂0,05 güven düzeyinde istatistiki açıdan anlamlı farklılık tespit edilmiş ve bu kapsamda %95 güven düzeyinde uygulanan Duncan testi sonucunda birinci grubu 28,47 çimlenme hızı ile kontrol grubu tohum numunelerinin ve son grubu da 15,92 ile 4. Doz CuO nanopartikül doz grubu tohum numunelerinin oluşturduğu saptanmıştır. Araştırma kapsamında yaygın ortam kirlenmesine neden olan ZnO nanopartikülün Gürgen Yapraklı Kayacaık türünün tohumlarının çimlenme parametreleri üzerindeki etkilerine de bakılmıştır. Bu kapsamda, ZnO nanopartikülüne ait 4 farklı doz konsantrasyon ile kontrol numunesi tohumlar arasında çimlenme yüzdesi yönünde uygulanan varyans analizinde P˂0,05 güven düzeyinde istatistiki açıdan önemli farklılığın ortaya çıktığı belirlenmiş ve bu itibarla homojen grupları belirlemek amacıyla %95 güven düzeyinde gerçekleştirilen Duncan Testi sonucunda birinci grubu %33,65 çimlenme yüzdesi ile kontrol grubunun ve son grubu ise %20,18 çimlenme yüzdesi ile 4. doz değerindeki CuO nanopartikül uygulama grubunun oluşturduğu belirlenmiştir. Yine ZnO nanopartikülünde çimlenme hızı yönünden kontrol grubu tohum numuneleri ile nanopartikül doz uygulamam grupları arasında P˂0,05 güven düzeyinde istatistiki açıdan anlamlı farklılık tespit edilmiş ve bu kapsamda %95 güven düzeyinde uygulanan Duncan testi sonucunda birinci grubu 30,54 çimlenme hızı ile kontrol grubu tohum numunelerinin ve son grubu da 11,83 ile 4. doz ZnO nanopartikül grubu tohum numunelerinin oluşturduğu saptanmıştır.
Özet (Çeviri)
In this original study, which investigated the effects of the seeds of the European Hophornbeam (Ostrya carpinifolia Scop.) species collected from Bartın, Düzce, Sinop, Adana and Erzurum origins on the germination percentage and germination rate variables after being treated with 4 different doses (400 mg/l, 800 mg/l, 1200mg/l and 1600mg/l) of CuO and ZnO nanoparticles, which are widely effective in environmental pollution, were prepared. In the variance analysis applied in terms of germination percentage between the seeds of the control sample and 4 different dose concentrations of CuO nanoparticles, it was determined that a statistically significant difference emerged at the P˂0.05 confidence level and as a result of the Duncan Test performed at the 95% confidence level in order to determine homogeneous groups, it was determined that the first group was the control group with 35.79% germination percentage and the last group was the group without CuO nanoparticle application at the 4th dose value with 18.26% germination percentage. Again, a statistically significant difference was detected between the control group seed samples and the nanoparticle dose application groups in terms of germination rate in CuO nanoparticles at the P˂0.05 confidence level and as a result of the Duncan test applied at the 95% confidence level, it was determined that the first group was formed by the control group seed samples with a germination speed of 28.47 and the last group was formed by the 4th dose CuO nanoparticle dose group seed samples with 15.92. Within the scope of the research, the effects of ZnO nanoparticles, which cause widespread environmental pollution, on the germination parameters of the seeds of the European Hophornbeam species were also examined. In this context, it was determined that a statistically significant difference emerged at the P˂0.05 confidence level in the variance analysis applied between the seeds of 4 different dose concentrations of ZnO nanoparticles and the control sample in terms of germination percentage and in this respect, as a result of the Duncan Test performed at the 95% confidence level in order to determine homogeneous groups, it was determined that the first group was formed by the control group with 33.65% germination percentage and the last group was formed by the CuO nanoparticle application group at the 4th dose value with 20.18% germination percentage. Again, a statistically significant difference was detected at the P˂0.05 confidence level between the seed samples of the control group and the nanoparticle dose application groups in terms of germination rate in ZnO nanoparticles and in this context, as a result of the Duncan test applied at the 95% confidence level, it was determined that the first group was formed by the seed samples of the control group with a germination rate of 30.54 and the last group was formed by the seed samples of the 4th dose of ZnO nanoparticle group with 11.83.
Benzer Tezler
- Bakır/gümüş/çinko oksit (CuAg/ZnO) partiküllerinin ultrasonik sprey piroliz yöntemiyle üretimi
Production of CuAg/ZnO nanocomposite particles by ultrasonic sprey pyrolysis
TOLGA ÇAKMAK
Yüksek Lisans
Türkçe
2016
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. SEBAHATTİN GÜRMEN
- CuO, ZnO ve TiO2 nanopartiküllerinin Mentha aquatica L. bitkisinin yaprak ekstraktı kullanılarak biyosentezi, karakterizasyonu ve genotoksik etkileri
Characterization and genotoxic effects of biologically synthetized CuO, ZnO and TiO2 nanoparticles using Mentha aquatica L. leaf extract
FATİH DOĞAN KOCA
- ZnO, CuO ve γ-Fe3O4 nanopartiküllerin yeşil sentezi ve buğday genotipleri üzerindeki etkilerinin doku kültüründe araştırılması
Green synthesis of ZnO, CuO and γ-Fe3O4 nanoparticules and the investigation of these nanoparticules' effects on wheat genotypes in tissue culture
ÖZGE BALPINAR NALCI
Yüksek Lisans
Türkçe
2017
BiyoteknolojiAtatürk ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
PROF. DR. HAYRUNNİSA NADAROĞLU
- Çeşitli nanopartiküllerin Allium cepa ve Caenorhabditis elegans test sistemlerinde toksik, genotoksik ve sitotoksik etkilerinin araştırılması
The investigation of toxic, genotoxic and cytotoxic effects of various nanoparticles in Allium cepa and Caenorhabditis elegans test systems
GAMZE ATACI
Yüksek Lisans
Türkçe
2018
BiyolojiCumhuriyet ÜniversitesiBiyoloji Ana Bilim Dalı
PROF. DR. ŞİFA TÜRKOĞLU
- Nanoteknolojik yaklaşımla üretilen Zu ve Cu kimyasal elementlerinin nanoyapılarının araştırılması
Investigation of nanostructures of Zn and Cu chemical elements produced with nanotechnological approach
GHAİDAA SAMİ DHEYAB DHEYAB
Yüksek Lisans
Türkçe
2025
Fizik ve Fizik MühendisliğiÇankırı Karatekin ÜniversitesiFizik Ana Bilim Dalı
PROF. DR. ÇİĞDEM YÜKSEKTEPE ATAOL