Motorlu taşıtlarda malzeme seçimi ve etkileyen kriterler
Material selection and criteria for engine vehicles
- Tez No: 90913
- Danışmanlar: DOÇ. DR. OSMAN ELDOĞAN
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1999
- Dil: Türkçe
- Üniversite: Sakarya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Eğitimi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 120
Özet
ÖZET
Özet (Çeviri)
MATERIAL SELECTION AND CRITERIA FOR ENGINE VEHICLES SUMMARY KEYWORDS : Vehicle Materials, Criteria to Material Selection The reserve of the raw materials which are used in the industry decrease and the loss of energy takes place during the process of raw materials. Both of these factors encourage the car manufacturer to produce vehicle having less petrol consumption. It is very important to improve material properties to prevent the damage of cars occurred due to the increasing the number of traffic accidents. The corrosion on automobile parts increases due to the effects of environment factors such as air pollution, acid rain and sea air. On the other hand, the optimization of automotive design and selection of appropriate materials are necessary to decrease the effects of the mentioned problems. There are a lot of parameters affected the selection of materials such as safety, weight, cost, recycling, corrosion resistance, noise etc. It is necessary to consider all of these factors. In this study, the methods which are used in the selection of appropriate materials were investigated. It was discussed the properties and applications of materials used in the fabrication of engine vehicle parts. It was investigated what kind of materials can be used to obtain safety, less noise, high corrosion resistance, less petrol consumption. It was considered the using of steel, cast iron, aluminum, polymers and ceramics as engine vehicle materials. IX
Benzer Tezler
- Enerji kaynağı olarak doğal gaz kullanımı ve doğal gaz kullanımına yönelik depolama sistemlerinin incelenmesi
Natural gas use as an energy source and investigation of storage systems for natural gas
KASIM ÖNDER
Yüksek Lisans
Türkçe
2019
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. TURGUT GÜLMEZ
- Development of an intermediate layer for multilayer hoses used in turbo lines of motor vehicles
Motorlu taşıtların turbo hatlarında kullanılan çok katmanlı hortumlar için bir ara katman geliştirilmesi
GÜL ÜNAL
Doktora
İngilizce
2018
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. AYŞEGÜL ERSOY MERİÇBOYU
- Titreşim esaslı taşıt tasarım parametrelerinin belirlenmesi
Determination of the vibration based vehicle designing parameters
İBRAHİM KELEŞ
Yüksek Lisans
Türkçe
2001
Makine MühendisliğiMustafa Kemal ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF.DR. ERTUĞRUL BALTACIOĞLU
- Motorlarda ve motorlu taşıtlarda yakıt ekonomisi ve işletme şartlarının performansa etkilerinin incelenmesi
Fuel economy at engines and vehicles and investigation of performance affects to operating
BARIŞ AKDENİZ
Yüksek Lisans
Türkçe
2006
Makine MühendisliğiMarmara ÜniversitesiMakine Eğitimi Ana Bilim Dalı
Y.DOÇ.DR. RECEP YENİTEPE
- Yağlı sürtünme şartlarında çelik ince zırhlı yataklarda üretim tekniklerinin aşınmaya etkisinin araştırılması
Başlık çevirisi yok
YUSUF KILINÇ
Yüksek Lisans
Türkçe
1993
Makine MühendisliğiErciyes ÜniversitesiMakine Ana Bilim Dalı
DOÇ. DR. M. BAKİ KARAMIŞ