Geri Dön

Perklorat-seçici kompozit potansiyometrik sensör geliştirilmesi

Development of perchlorate-selective composite potentiometric sensor

  1. Tez No: 910361
  2. Yazar: ELİF MERAL
  3. Danışmanlar: PROF. DR. FATİH ÇOLDUR
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Katıhal elektrot, İyon seçici elektrotlar, Solid state electrode, Ion selective electrodes
  7. Yıl: 2025
  8. Dil: Türkçe
  9. Üniversite: Erzincan Binali Yıldırım Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Ana Bilim Dalı
  12. Bilim Dalı: Kimya Bilim Dalı
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Bu tez çalışması, perklorat iyonlarının potansiyometrik tayini için yeni bir bütünüyle katı hal kompozit iyon seçici elektrodun (ISE) geliştirilmesini konu almaktadır. Algılayıcı elektrot tabakasının aktif bileşeni olarak (iyonofor), metiltrioktilamonyum klorür (MTOACl) tuzu kullanılmıştır. İyon seçici kompozit tabakanın optimum formülasyonunu belirlemek amacıyla, farklı kütle oranlarında grafit, poli (vinil klorür) (PVC), çok duvarlı karbon nanotüp (MWCNT), plastikleştirici ve iyonik katkı maddesi kullanılarak çeşitli kompozisyonlara sahip kompozit ISE'ler üretilmiş ve potansiyometrik performans parametreleri ayrıntılı olarak incelenmiştir. Elde edilen sonuçlar, 5 mg MTOACl, 20 mg PVC, 40 mg 2-nitrofeniloktileter (o-NPOE) ve 60 mg grafit kullanılarak hazırlanan kompozitin en üstün potansiyometrik özellikleri sergilediğini göstermiştir. Optimum kompozisyonda hazırlanmış kompozit kullanılarak hazırlanan kompozit elektrot, 5,0×10⁻6 ila 1,0×10⁻¹ M perklorat konsantrasyon aralığında doğrusal bir cevap, -51.5 mV/on katlık konsantrasyon değişimi eğimli bir Nernst yanıtı, 2,0×10-6 M bir tayin sınırı, 3,5-9,0 arasında bir pH çalışma aralığı ve yaklaşık 10 saniyelik bir yanıt süresi sunmaktadır. Geliştirilen elektrotun, perklorat iyonlarına karşı yüksek düzeyde tekrarlanabilir, kararlı ve seçici bir potansiyometrik cevap gösterdiği saptanmıştır. Elektrodun analitik başarısı, içerisine perklorat ilave edilmiş musluk sularının perklorat iyonu içeriğinin doğrudan kalibrasyon yöntemi kullanılarak başarıyla tayin edilmesiyle gösterilmiştir.

Özet (Çeviri)

This thesis focuses on the development of a novel all-solid-state composite ion-selective electrode (ISE) for the potentiometric determination of perchlorate ions. Methyltrioctylammonium chloride (MTOACl) salt was employed as the active component (ionophore) of the sensing electrode layer. To determine the optimal formulation of the ion-selective composite layer, composite ISEs with varying mass ratios of graphite, poly(vinyl chloride) (PVC), multi-walled carbon nanotubes (MWCNTs), plasticizer, and ionic additive were fabricated, and their potentiometric performance parameters were thoroughly investigated. The results revealed that the composite prepared using 5 mg of MTOACl, 20 mg of PVC, 40 mg of 2-nitrophenyloctyl ether (o-NPOE), and 60 mg of graphite exhibited the most superior potentiometric characteristics. The composite electrode prepared with this optimal composition demonstrated a linear response within the perchlorate concentration range of 5,0×10⁻6 to 1,0×10-1 M, a Nernstian slope of -51,5 mV/decade, a limit of detection of 2,0×10-6 M, a pH operating range of 3,5-9,0, and a response time of approximately 10 seconds. The developed electrode exhibited highly reproducible, stable, and selective potentiometric responses towards perchlorate ions. The analytical merit of the electrode was successfully demonstrated through the direct calibration method for the determination of perchlorate ion content in spiked tap water samples

Benzer Tezler

  1. Neokuproin temelli perklorat-seçici potansiyometrik PVC membran sensör

    Potentiometric perchlorate-selective PVC membrane sensor based on neocuproine

    AHMET ÖNDER

    Yüksek Lisans

    Türkçe

    Türkçe

    2016

    KimyaErzincan Üniversitesi

    Kimya Ana Bilim Dalı

    YRD. DOÇ. DR. FATİH ÇOLDUR

  2. Perklorat ve salisilat anyonlarına duyarlı iyon-seçici elektrotlar hazırlanması

    Preparation of ion-selective electrodes sensitive to perchlorate and salicylate ions

    MELEK NUR AYANOĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2014

    KimyaAnkara Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. ESMA KILIÇ

  3. Rodanür ve perklorat iyon-seçici elektrot geliştirilmesi

    The Construction of the thiocyanate and perchlorate ion-selective electrode

    SEVCAN ERDEN

    Yüksek Lisans

    Türkçe

    Türkçe

    2002

    KimyaAnkara Üniversitesi

    Kimya Ana Bilim Dalı

    YRD. DOÇ. DR. ESİN CANEL

  4. Çeşitli iyon-seçici elektrotların geliştirilmesi; nitrat-, rodanür-, iyodür- ve perklorat-seçici elektrotlar

    Construction of some ion-selective electrodes; nitrate-, thiocyanate-, iodide- and perchlorate-selective electrodes

    NAZİFE YILMAZ ASLAN

    Doktora

    Türkçe

    Türkçe

    2000

    KimyaAnkara Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. ESMA KILIÇ

  5. Salisilat ve perkloratın ilaç, çevre ve gıda örneklerinde potansiyometrik tayini için asimetrik elektrotların geliştirilmesi ve uygulamaları

    Development and applications of asymmetric electrodes for the potentiometric determination of salicylate and perchlorate in pharmaceutical, environmental, and food samples

    EGE AYDIN

    Yüksek Lisans

    Türkçe

    Türkçe

    2025

    KimyaAnkara Üniversitesi

    Kimya Ana Bilim Dalı

    DOÇ. DR. AYÇA DEMİREL ÖZEL