İletken polimer metal oksit kompozitlerinin kapasitör olarak değerlendirilmesi
Evaluation of conductive polymer metal oxide composites as capacitors
- Tez No: 919851
- Danışmanlar: PROF. DR. HASAN KILIÇ, DOÇ. DR. DAVUT UZUN
- Tez Türü: Yüksek Lisans
- Konular: Enerji, Kimya, Energy, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2025
- Dil: Türkçe
- Üniversite: Marmara Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Fizikokimya Bilim Dalı
- Sayfa Sayısı: 134
Özet
Enerjinin kullanımının ve öneminin her geçen gün daha da artması enerji depolama sistemlerine olan ihtiyacın da artmasına yol açmaktadır. Gerek kesintisiz enerji kullanma isteği gerek kaynakların verimli kullanabilme temennisi ve ekonomik fayda açısından enerjiyi depolamak önemli bir amaç haline gelmiştir. Bu amacı yerine getirmek için kullanılan sistemler enerji depolama sistemleridir. Bu sistemler incelenmekte ve geliştirilmeye çalışılmaktadır. Kapasitörler de bu sistemlerden biridir. Kapasitörler araştırılmaya açık bir konudur. İlk geliştirildikleri andan günümüze gelinceye kadar geliştirilmiş, çok çeşitlilik katılmış ve süperkapasitörlere kadar evrilmiştir. Birçok alanda kullanılmaktadır. Elektrik devreleri, sinyal filtreleme ve enerji depolama bu alanlardan bazılarıdır. Bu tez çalışmasında kapasitörlere değinilmiştir. Üretilen metal oksitlerin ( CuO ve ZnO), ikili metal oksitleri ve sonra iletken polimer PANI ile kompozitleri üretilmiştir. Üretilen ürünlerin elektrotlarının elektrokimyasal ve enerji depolama performansları 2 M KOH elektrolitinde CV, GCD ve EIS performans testleri ile incelemeleri yapılmıştır. Elde edilen sonuçlara göre kapasiteler; PANI (P1Ü0), PANI/CuO (P2Ü1), PANI/ZnO (P3Ü2) ve PANI/CuO/ZnO (P4Ü3) sırasıyla; 166,3 F/g, 417,2 F/g, 215,1F/g ve 293,6 F/g şeklinde elde edilmiştir. Kulombik verimlilikler sırasıyla: PANI (P1Ü0), PANI/CuO (P2Ü1), PANI/ZnO (P3Ü2) ve PANI/CuO/ZnO (P4Ü3) %97,09, %86,31, %86,8 ve %87,21 olarak elde edilmiştir. PANI/CuO (P2Ü1) tam ürününün ömür testinde 3000. döngüde bile %100 kulombik verimlilik elde edilmiştir. Üretilen kompozitlerin süperkapasitörler için faydalı olduğu ve kullanımının umut vaat ettiği açıktır.
Özet (Çeviri)
The increase in the use and importance of energy day by day leads to an increase in the need for energy storage systems. Storing energy has become an important goal in terms of both the desire to use uninterrupted energy, the desire to use resources efficiently and economic benefits. The systems used to fulfill this purpose are energy storage systems. These systems are being studied and tried to be improved. Capacitors are one of these systems. Capacitors are a subject that is open to research. From the moment they were first developed to the present day, they have been developed, added a lot of variety and evolved to supercapacitors. It is used in many areas. Electrical circuits, signal filtering, and energy storage are some of these areas. Capacitors are mentioned in this thesis. Composites of the produced metal oxides (CuO and ZnO) were produced with binary metal oxides and then conductive polymer PANE. The electrochemical and energy storage performances of the electrodes of the manufactured products were examined with CV, GCD and EIS performance tests at 2 M KOH electrolyte. According to the results obtained, the capacities are; PANI (P1Ü0), PANI/CuO (P2Ü1), PANI/ZnO (P3Ü2) and PANI/CuO/ZnO (P4Ü3), respectively; 166.3 F/g, 417.2 F/g, 215.1 F/g and 293.6 F/g. Culombic efficiencies were obtained as 97.09%, 86.31%, 86.8% and 87.21%, respectively: PANI (P1Ü0), PANI/CuO (P2Ü1), PANI/ZnO (P3Ü2) and PANI/CuO/ZnO (P4Ü3). In the life test of the PANI/CuO (P2U1) complete product, 100% coulombic efficiency was achieved even in the 3000th cycle. It is clear that the composites produced are useful for supercapacitors, and their use is promising.
Benzer Tezler
- Conductive composites, nanofiber synthesis, characterization and capacitive application
İletken kompozit ve nanoelyafların sentezi, karakterizasyonu ve kapasitif uygulamaları
BAIDAA ALKHATEAB
- Fabrıcatıon of 3D prınted flexıble polyurethane nanocomposıte
3b baskili esnek poliüretan nanokompozit imalati
ALİCAN MERT
Yüksek Lisans
İngilizce
2025
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
DOÇ. DR. BİRGÜL BENLİ
- Electrospun polyacrylonitrile based composite nanofibers containing polyindole and graphene oxide
Poliindol ve grafen oksit içeren poliakrilonitril tabanlı kompozit nanofiberler
İLKNUR BOZKAYA GERGİN
Doktora
İngilizce
2023
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. ABDÜLKADİR SEZAİ SARAÇ
- Investigation of capacitive behaviour of emulsion polymerized pedot and its nanocomposites
Emülsiyon polimerizasyonu ile sentezlenen pedot ve nanokompozitlerinin kapasitif özelliklerinin incelenmesi
DENİZ GÜLERCAN
Doktora
İngilizce
2019
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. ABDÜLKADİR SEZAİ SARAÇ
- Polipirol/metal oksit kompozitlerinin sentezi ve karakterizasyonu
Synthesis and characterization of polypyrrole/metal oxide composites
FATMA SENA ÖZPEKER
Yüksek Lisans
Türkçe
2019
Kimya MühendisliğiAtatürk ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ HATİCE BAYRAKÇEKEN