Budama atıklarından oluşturulan tarımFV sisteminin marul ve güç üretimine olan etkisi
Impact of an agrivoltaic system constructed from pruning residues on lettuce and power production
- Tez No: 937635
- Danışmanlar: DOÇ. DR. ONUR TAŞKIN
- Tez Türü: Yüksek Lisans
- Konular: Ziraat, Agriculture
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2025
- Dil: Türkçe
- Üniversite: Bursa Uludağ Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Biyosistem Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 48
Özet
Fosil yakıt kullanımının çevresel etkileri sonucu iklim değişikliği vb. sorunlar ile karşılaşılmaktadır. Yenilenebilir enerji kaynakları arasında yer alan güneş enerjisi, fotovoltaik (FV) paneller aracılığıyla elektrik enerjisine dönüştürülmektedir. TarımFV (Agrivoltaic) sistemler ise yenilikçi bir yöntem olup sınırlı alanlarda hem tarım hem de enerji üretimini aynı anda gerçekleştirmeyi sağlamaktadır. Bu tez çalışması kapsamında, Bursa Uludağ Üniversitesi Ziraat Fakültesi arazisinde taşıyıcı sistemi budama atıklarından oluşturulmuş üç FV panelli TarımFV deneme düzeneği kurulmuştur. Denemede farklı sulama (kontrol %100 sulama (S), TarımFV altında %60 S, %80 S, %100 S ve %120 S) koşullarında 06 Ağustos 2024 – 08 Ekim 2024 tarihleri arasında marul bitkisi yetiştirilmiş ve panel güç üretimi, aydınlık düzeyi, klorofil, bitki sıcaklığı ve marul kalite özellikleri incelenmiştir. Yapılan tez çalışması sonucunda, FV panellerin ortalama güç üretimleri karşılaştırılmış ve TarımFV koşulunun %2,92 güç kaybına neden olduğu belirlenmiştir. FV panel altındaki ortalama aydınlık düzeyi 6.500 lüks, kontrol grubunda ise 47.700 lüks olarak kaydedilmiştir. Marul bitkisinin ortalama klorofil seviyesi ise TarımFV altındaki bitkilerde 24,94 SPAD, kontrol grubunda ise 32,49 SPAD olarak ölçülmüştür. TarımFV altındaki %100 S koşulunun a renk değeri (-10,39±0,85) ve baş ağırlığı (310,05±44,80 g) açısından en uygun yöntem olduğu tespit edilmiştir. Sonuç olarak, TarımFV sistemlerinin tarım ve enerji sektörlerinde önemli bir potansiyele sahip olduğu, çevresel ve ekonomik sürdürülebilirliğe katkı koyabileceği görülmüştür.
Özet (Çeviri)
The environmental impacts of fossil fuel usage have led to issues such as climate change. Solar energy, one of the renewable energy sources, is converted into electricity through photovoltaic (PV) panels. Agrivoltaic systems represent an innovative approach that enables the simultaneous production of both agriculture and energy in limited lands. Within the scope of this thesis, an Agrivoltaic experimental setup consisting of three PV panels with a support system made from pruning residues was established on the land of Bursa Uludag University Faculty of Agriculture. Lettuce plants were cultivated under different irrigation conditions (control with 100% irrigation (I), 60% I, 80% I, 100% I, and 120% I under the Agrivoltaic) between August 6, 2024, and October 8, 2024. The study examined the panel power generation, light intensity, chlorophyll content, plant temperature, and lettuce quality attributes. As a result of the thesis study, the average power production of PV panels was compared, and it was determined that the Agrivoltaic system resulted in a 2.92% power loss. The average light intensity under the PV panels was recorded as 6,500 lux, while it was 47,700 lux in the control group. The average chlorophyll content of lettuce plants was measured at 24.94 SPAD under the Agrivoltaic system, compared to 32.49 SPAD in the control group. Among the conditions tested, the 100% irrigation (I) condition under the Agrivoltaic system was found to be the most favorable method in terms of the a color value (-10.39 ± 0.85) and head weight (310.05 ± 44.80 g). In conclusion, Agrivoltaic systems demonstrate significant potential in the agricultural and energy sectors, contributing to environmental and economic sustainability.
Benzer Tezler
- Bağ budama artıklarından üretilen yonga levhaların bazı fiziksel ve mekanik özellikleri ile bu levhalarla oluşturulan mobilya köşe birleştirmelerinin moment taşıma kapasitesinin belirlenmesi
Determination of physical and mechanical properties of panels produced with different ratios of vine prunings/wood chips and investigation of their moment capacity in furniture corner joints
ERTAN ÖZEN
Doktora
Türkçe
2009
Ağaç İşleriGazi ÜniversitesiTeknik Eğitim Bölümü
DOÇ. DR. OSMAN GÖKTAŞ
PROF. DR. H. HASAN EFE
- Palmiye ağacı budama atıklarından plastik kompozit üretimi
Plastic composite production from palm pruning wastes
FATİH CAFER KARAMAN
Yüksek Lisans
Türkçe
2019
Biyokimyaİzmir Katip Çelebi ÜniversitesiDisiplinlerarası Biyokompozit Mühendisliği Ana Bilim Dalı
PROF. DR. NİLGÜL ÇETİN
- Sürdürülebilir atık yönetimi kapsamında organik atıkların solucan ile kompostlaştırılması: İTÜ Ayazağa kampüsü örneği
Composting organic wastes with worms within the scope of sustainable waste management: The case of ITU Ayazaga campus
AYŞE NUR USTA
Yüksek Lisans
Türkçe
2023
Çevre Mühendisliğiİstanbul Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ HÜSEYİN GÜVEN
- Zeytin budama ve sera domates artıklarının peletlenmesinde sıcak buhar uygulaması ve pelet torefikasyon işleminin pelet kalite parametrelerine etkisinin belirlenmesi
Determination of the effect of steam conditioning and torrefaction process on pellet quality parmeters in olive pruning residues and greenhouse tomato residues
HASAN YILMAZ
Doktora
Türkçe
2022
EnerjiAkdeniz ÜniversitesiTarım Makineleri ve Teknolojileri Mühendisliği Ana Bilim Dalı
PROF. DR. MEHMET TOPAKCI
- Biyoreaktör kompostlama teknolojisi ile üretilen tavuk gübresi kompostlarının mısır topraklarının karbon ve azot mineralizasyonu üzerine etkileri
The effects of chicken manure composts produced by in-vessel composting technology on carbon and nitrogen mineralization of maize soils
ŞAHESTE ELİF ÇOKAN
Yüksek Lisans
Türkçe
2024
ZiraatEge ÜniversitesiToprak Bilimi ve Bitki Besleme Ana Bilim Dalı
PROF. DR. HÜSEYİN HÜSNÜ KAYIKÇIOĞLU