Geri Dön

Ters sarkaç modelinin reaksiyon tekeri ile kontrolü

Controlling the inverted pendulum model with the reaction wheel

  1. Tez No: 940019
  2. Yazar: HİKMET KÜBRA BAYRAM
  3. Danışmanlar: DR. ÖĞR. ÜYESİ ENGİN HASAN ÇOPUR
  4. Tez Türü: Yüksek Lisans
  5. Konular: Uçak Mühendisliği, Aeronautical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2025
  8. Dil: Türkçe
  9. Üniversite: Necmettin Erbakan Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Uçak Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Ters sarkaç modeli bir nokta etrafında serbestçe dönebilen ve doğrusal olmayan bir sistem örneğidir. Doğrusal olmayan yapısı nedeniyle kontrolünde yaşanan zorlukları aşmak için literatürde çeşitli çalışmalar yapılmaktadır. Yapılan çalışmalardan bazıları ters sarkacın reaksiyon tekeri ile farklı denetleyiciler kullanılarak kontrol edilmesine yöneliktir ve bu tez çalışmasının konusunu oluşturmaktadır. Ters sarkaç modeli uydu araçları başta olmak üzere robotik-insansı araçlara kadar birçok sistemde kullanılmakta olduğundan bu tez çalışmasının farklı çalışmalara katkıda bulunması amaçlanmıştır. Çalışmada, ters sarkaç sisteminin matematiksel denklemleri sistemin doğrusal olmayan ve karmaşık yapısından dolayı Lagrange Mekaniğine kullanılarak oluşturulmuştur. Matematiksel denklemleri oluşturulan sistem MATLAB Simulink programında modellenmiştir. Model PID ve LQR kontrolcü ile kontrol edilmek istenmiş ve kontrolcü parametreleri Yanıt Optimizasyonu ve Uygunluk Fonksiyonu yöntemleri ile optimize edilmiştir. Optimize edilmiş parametreler modele uygulandığında, sistemin farklı açılardaki konumları için kontrolcülerin modeli istenilen konuma getirdiği ve bu konumda sistemi dengede tuttuğu gözlemlenmiştir. Daha sonra enerji tabanlı yaklaşım ile Lyapunov Fonksiyonu kullanılarak sistemin salınım kontrolü PID ve LQR denetleyiciler ile yapılmıştır. Sonuç olarak sistemi istenilen konumda dengede tutmak ve sistemin salınım kontrolünü gerçekleştirmek için kullanılan yöntemlerin ve denetleyicilerin etkin bir performans gösterdiği görülmüştür.

Özet (Çeviri)

The inverted pendulum model is an example of a nonlinear system that can rotate freely around a point. Various studies are carried out in the literature to overcome the difficulties experienced in its control due to its nonlinear structure. Some of the studies carried out are aimed at controlling the inverted pendulum using different controllers with a reaction wheel and constitute the subject of this thesis. Since the inverted pendulum model is used in many systems, especially in satellite vehicles and robotic-humanoid vehicles, it is aimed that this thesis study will contribute to different studies. In the study, the mathematical equations of the inverted pendulum system were created using Lagrangian Mechanics due to the nonlinear and complex structure of the system. The system with mathematical equations was modeled in the MATLAB Simulink program. The model was intended to be controlled with PID and LQR controllers and the controller parameters were optimized with the Response Optimizer and Fitness Function methods. When the optimized parameters were applied to the model, it was observed that the controllers brought the model to the desired position for different angles of the system and kept the system balanced at this position. Then the swing-up control of the system was done with the PID and LQR controllers using the Lyapunov Function with the energy based approach. As a result, it was seen that the methods and controllers used to keep the system in balance at the desired position and to perform the swing-up control of the system showed effective performance.

Benzer Tezler

  1. Analysis and control of body attached underactuated spring mass runner morphologies

    Eksik tahrikli gövdeli yaylı kütle koşucu morfolojilerinin analizi ve kontrolü

    İZEL SEVER GÖKMEN

    Yüksek Lisans

    İngilizce

    İngilizce

    2022

    Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ MUSTAFA MERT ANKARALI

    PROF. DR. ULUÇ SARANLI

  2. Nicemli kontrol girişi ile ters sarkaç yukarı kaldırma benzetimi

    Inverted pendulum swing-up simulation with quantized control inputs

    ZUHAİR SHAKOR MAHMOOD

    Yüksek Lisans

    Türkçe

    Türkçe

    2012

    Elektrik ve Elektronik MühendisliğiEskişehir Osmangazi Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    PROF. DR. ABDURRAHMAN KARAMANCIOĞLU

  3. Kayma kipli kontrol yaklaşımlarının ters sarkaç sistemine uygulanması

    Controlling an inverted pendulum system using sliding mode control techniques

    AHMET YAZICI

    Yüksek Lisans

    Türkçe

    Türkçe

    2000

    Elektrik ve Elektronik MühendisliğiEskişehir Osmangazi Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    DOÇ.DR. ABDURRAHMAN KARAMANCIOĞLU

  4. Yürüme döngüsünün ters sarkaç ile analizi

    Analysis of the gait cycle with an inverted pendulum model

    AYSEL GİZEM ÖZCAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2025

    Makine Mühendisliğiİstanbul Üniversitesi-Cerrahpaşa

    Makine Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ NURAY KORKMAZ CAN

  5. Analysis and control of a running spring-mass model with an upright trunk based on virtual pendulum concept

    Sanal sarkaç kavramına dayalı dik gövde ile koşan yay-kütle modelinin analizi ve kontrolü

    OSMAN KAAN KARAGÖZ

    Yüksek Lisans

    İngilizce

    İngilizce

    2020

    Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ MUSTAFA MERT ANKARALI

    PROF. DR. ULUÇ SARANLI