Su jeti ile havalandırma sisteminde ağızlık tipinin havalandırma performansına etkisi
The Effect of nozzle type on aeration performance in plunging water jet aeration system
- Tez No: 96365
- Danışmanlar: PROF. DR. NUSRET ŞEKERDAĞ
- Tez Türü: Doktora
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2000
- Dil: Türkçe
- Üniversite: Fırat Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 89
Özet
Özet yok.
Özet (Çeviri)
In this study, for the plunging water jet aeration system using inclined different nozzle types, the flow characteristics such as the bubble penetration depth, air entrainment rate, oxygen transfer factor and aeration efficiency which changed depending on the jet velocity were evaluated in an air- water system. Numerous studies were conducted with circular nozzle. The present study describe new experiments performed with different nozzle types. Three types of nozzles i.e. circular, ellipse exit nozzle and rectangle duct with rounded ends exit nozzle were examined. Experimental results showed that these two types (ellipse and rectangle duct with rounded ends exit nozzle) of jet have very different flow characterizes and entrainment patterns on free jet surface and also submerged jet region within the receiving pool (tank). More aeration performance was observed by air entrainment rate and oxygen transfer efficiency in rectangle duct with rounded ends exit nozzle. But also bubble penetration depth is less and ellipse exit nozzle is indicated a rather high quality the way bubble penetration depth. From these results, it may be said that it is appropriate to be preferred ellipse exit nozzle on aeration of the deeper and rectangle duct with rounded ends exit nozzle in the practices which are needed like bubble concentration. Key Words : Plunging water jet, aeration, nozzle type
Benzer Tezler
- Kapaklı konduitli flotasyon hücreleri fiziksel parametrelerinin havalandırma performansına etkisi
The effect on aeration performance of physical parameters of head gated conduits flotation cells
AYÇA AYTAÇ
Yüksek Lisans
Türkçe
2017
İnşaat MühendisliğiFırat Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. MUHAMMED CİHAT TUNA
- Kapaklı konduitli flotasyon kolonlarının havalandırma performansının incelenmesi
Investigation of the aeration performance of flotation columns with heat gated conduits
BÜNYAMİN CANPOLAT
Yüksek Lisans
Türkçe
2017
Metalurji MühendisliğiFırat Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. MUHAMMED CİHAT TUNA
- Dikey dalan sıvı jeti için farklı jet çıkış geometrilerinin havalandırma miktarına etkisinin sayısal olarak incelenmesi
Investigation of the different nozzle geometries for vertical plunging water jet air entrainment with numerical methods
BURAK ALP KARAN
Yüksek Lisans
Türkçe
2017
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiMaden Mühendisliği Ana Bilim Dalı
DOÇ. DR. YAKUP ERHAN BÖKE
DR. ZAFER GEMİCİ
- Venturi aygıtı ile oluşturulan su jetinin havalandırma performansının incelenmesi
Study on the aeration performance of water jet which is formed by a venturi device
ŞERMİN KOÇYİĞİT
Yüksek Lisans
Türkçe
2004
İnşaat MühendisliğiFırat Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. EMİN EMİROĞLU
- Yüksek havalandırma verimine sahip su jeti ağızlıklarının geliştirilmesi
Development of nozzles possessed high aeration efficiency
BEGÜM KANTARCI ONAY
Yüksek Lisans
Türkçe
2017
İnşaat MühendisliğiFırat Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. FAHRİ ÖZKAN