Geri Dön

Beyazlatma işlemi sonrasında uygulanan farklı antioksidanların rezin dentin bağlanma dayanımına etkisinin değerlendirilmesi

Evaluation of the effect of applications of different antioxidant agents on the resin dentine bond strength after bleaching precedures

  1. Tez No: 1023204
  2. Yazar: MÜRÜVVET ÇAĞLAR
  3. Danışmanlar: DOÇ. DR. GÜNEŞ BULUT EYÜBOĞLU
  4. Tez Türü: Diş Hekimliği Uzmanlık
  5. Konular: Diş Hekimliği, Dentistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2026
  8. Dil: Türkçe
  9. Üniversite: Karadeniz Teknik Üniversitesi
  10. Enstitü: Diş Hekimliği Fakültesi
  11. Ana Bilim Dalı: Restoratif Diş Tedavisi Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Bu in vitro tez çalışmasının amacı; hidrojen peroksit (HP) ile beyazlatma işlemi sonrasında, dentin yüzeylerine farklı sürelerde uygulanan üç antioksidan olan sodyum askorbat (SA), yeşil çay (YÇ) ve resveratrolün (RES), iki aşamalı bir self-etch adeziv sistemin dentine makaslama bağlanma dayanımına (MBD) etkisinin değerlendirilmesidir. Bu çalışmada daimi insan molar dişlerinden elde edilen dentin örnekleri rastgele olarak iki kontrol ve dokuz deney grubuna ayrıldı (n:10). Deney gruplarında dentin yüzeylerine HP uygulamasından sonra %10'luk SA, %10'luk YÇ ve %10'luk RES antioksidan solüsyonları farklı sürelerde (1dk, 5 dk, 10 dk) uygulandı. Tüm örneklere Clearfil SE Bond ve kompozit rezin üretici talimatlarına uygun şekilde uygulanarak ışıkla polimerize edildi. Daha sonra tüm örneklere MBD testi yapıldı. Elde edilen verilerin incelenmesinde tek yönlü varyans analizi ve Tukey HSD post-hoc testi ile Welch ANOVA ve Games-Howell post-hoc testi kullanılmıştır (p<0,05). Hidrojen peroksit uygulanan gruptaki MBD değerleri, yalnızca CSE grubuna göre anlamlı derecede düşük bulundu (p<0,05). Sodyum askorbat uygulanan gruplarda uygulama süresinin artmasıyla MBD değerlerinde artış görüldü. 5 dk SA uygulanan grup, 1 dk SA uygulanan gruba göre daha yüksek MBD değeri gösterdi (p<0,05). Yeşil çay uygulanan gruplarda da süre artışıyla MBD değerlerinde artış izlendi ve 10 dk YÇ uygulanan grubun MBD değeri, 1 dk YÇ uygulanan gruba göre anlamlı derecede yüksek bulundu (p<0,05). Resveratrol uygulanan gruplarda ise tüm uygulama sürelerinde diğer deney gruplarına göre daha yüksek MBD değerleri elde edildi ve süreler arasında anlamlı farklılık saptanmadı. Bu in vitro çalışmanın bulgularına göre; HP ile yapılan beyazlatma işlemi dentin ile self-etch adeziv sistem arasındaki MBD'yi olumsuz yönde etkilemektedir. Beyazlatma sonrası uygulanan sodyum askorbat, yeşil çay ve resveratrol antioksidanlarının bu olumsuz etkiyi azaltarak MBD değerlerini artırdığı görülmüştür. Bu çalışmanın sınırları içerisinde, HP ile beyazlatma işlemi sonrasında rezin-dentin bağlanma dayanımının artırılması amacıyla SA, YÇ ve RES antioksidan ajanlarının kullanımı önerilebilir.

Özet (Çeviri)

The aim of this in vitro thesis study was to evaluate the effect of three antioxidants—sodium ascorbate (SA), green tea (GT), and resveratrol (RES)—applied to dentin surfaces for different durations after bleaching with hydrogen peroxide (HP), on the shear bond strength (SBS) of a two-step self-etch adhesive system to dentin. In this study, dentin specimens obtained from permanent human molar teeth were randomly divided into two control groups and nine experimental groups (n=10). In the experimental groups, after HP application to the dentin surfaces, 10% SA, 10% GT, and 10% RES antioxidant solutions were applied for different durations: 1 minute, 5 minutes, and 10 minutes. Clearfil SE Bond and composite resin were applied to all specimens according to the manufacturers' instructions and polymerized with light. Subsequently, all specimens were subjected to the SBS test. The obtained data were analyzed using one-way analysis of variance and Tukey HSD post-hoc test, as well as Welch ANOVA and Games-Howell post-hoc test (p<0.05). The SBS values in the hydrogen peroxide-treated group were found to be significantly lower only compared with the CSE group (p<0.05). In the sodium ascorbate groups, SBS values increased as the application time increased. The group treated with SA for 5 minutes showed a significantly higher SBS value than the group treated with SA for 1 minute (p<0.05). In the green tea groups, SBS values also increased with longer application times, and the SBS value of the group treated with GT for 10 minutes was significantly higher than that of the group treated with GT for 1 minute (p<0.05). In the resveratrol groups, higher SBS values were obtained at all application times compared with the other experimental groups, and no significant difference was detected among the different application durations. According to the findings of this in vitro study, bleaching with HP negatively affects the SBS between dentin and the self-etch adhesive system. It was observed that sodium ascorbate, green tea, and resveratrol antioxidants applied after bleaching reduced this negative effect and increased SBS values. Within the limitations of this study, the use of SA, GT, and RES antioxidant agents may be recommended to improve resin–dentin bond strength after bleaching with HP.

Benzer Tezler

  1. Farklı CAD-CAM materyalleri kullanılarak beyazlatılmış dişlere uygulanan laminate veneer restorasyonlarının kırılma dayanımlarının in-vitro olarak incelenmesi

    In-vitro investigation of the fracture strength of laminate veneer restorations applied to bleached teeth using different CAD-CAM materials

    ZELİHA TAŞTAN

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2022

    Diş HekimliğiMarmara Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. ŞEBNEM BEGÜM TÜRKER

  2. Beyazlatma ajanlarının estetik restoratif materyallerin yüzey özellikleri üzerine etkisi

    Effect of bleaching agents on surface properties of esthettic restorative materials

    PELİN İNAN KURUGÖL

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2016

    Diş Hekimliğiİstanbul Medipol Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    DOÇ. DR. HALUK BARIŞ KARA

  3. Deneysel beyazlatma ajanının fiziksel özelliklerinin In-Vitro olarak incelenmesi ve remineralizasyon açısından geliştirilmesi

    In-Vitro investigation of physical properties of an experimental whitening agent and its development in terms of remineralization

    KHANIM ISMAYILOVA

    Doktora

    Türkçe

    Türkçe

    2025

    Diş HekimliğiEge Üniversitesi

    Restoratif Diş Tedavisi Ana Bilim Dalı

    DOÇ. DR. HANDE KEMALOĞLU

  4. ER-YAG lazerin tam seramik desimantasyonunda kullanılmasında farklı diş doku yüzeylerindeki ve tekrar simantasyon sonrasındaki makaslama bağlanma değerlerine etkisi

    The Evaluation of Re-bonding Strengths of Leucite and Lithium disilicate Veneers Debonded with Er:YAG Laser on Enamel and Dentin Surfaces: An In- Vitro Study

    MERVE KARAGÖZ YILDIRAK

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2018

    Diş HekimliğiMarmara Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    DOÇ. DR. RİFAT GÖZNELİ

  5. Ağartma ajanlarının, seromer ve porselenlerin renk stabilitesi ve yüzey pürüzlülüğü üzerine etkisi

    Effects of bleaching agents on surface roughness and colour stability of ceromer and porcelains.

    HALUK BARIŞ KARA

    Doktora

    Türkçe

    Türkçe

    2010

    Diş HekimliğiSelçuk Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. FİLİZ AYKENT