Doğal gazın yanması endüstriyel uygulamaları ve bir kazana dönüşümünün incelenmesi
Başlık çevirisi mevcut değil.
- Tez No: 11462
- Danışmanlar: DOÇ. DR. MUHİDDİN CAN
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1991
- Dil: Türkçe
- Üniversite: Uludağ Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 126
Özet
Özet yok.
Özet (Çeviri)
11 ABSTRACT - The petrolium crisis happened in 1973, have made a requtrtment to the researches of an alternative energy sourses by having petrolium's place and using it more efficiency in the industrialised and developing countries At the end of these reseaches natural gas has been determined as the most usable energy by having petrol's place. Today, the ratio 'of the use of natural gas, in the usable energy sources, is 20 % in the world. - The advantages that natural gas brings, has been taken at enifiion and as in the fifth five- years developing plan, Turkey has made a chose of long period about using na tural gas. - The problems of turning natural gas to burn in both the stream tanks used in industry and the hotwater tanks used for heatinginthe houses, the prevention systems and the technical and economical being of this operation are the subjects which are given too much attention by the sector that produce and operate the tanks. - For heating buildings, the use of natural gas will have a great ratio in our general energy consumption. 43 % of the Consumed energy in our country is used for buildings. 85 % of this ratio is directly used for is observed Just for buildings, the only subject that is being discussed in the âgende of our country is turning the heating systems into natural gas.
Benzer Tezler
- Cam laminasyon otoklavında sızdırmazlık için kullanılan kapak contasının sonlu elemanlar yöntemi ile analiz edilmesi ve geometrisinin belirlenmesi
Analysis and determination of the gasket geometry by using finite element method for sealing on the door of glass lamination autoclave
CENGİZ BEYÇAYİRİ
Yüksek Lisans
Türkçe
2019
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ZEYNEP PARLAR
- Sabit yataklı yakma sistemlerinde yanmada kömür neminin emisyonlara etkisinin deneysel incelenmesi
Experimental investigations of effect of moisture on the emissions in fixed bed compustion appliances
NALAN ERDÖL AYDIN
- Anaerobik sistemlerde biyogaz içeriğinin enerji üretim sistemlerine etkisi
The effect of biogas content in anaerobic systems on energy production systems
KÜBRA SORGULU
Yüksek Lisans
Türkçe
2020
Çevre MühendisliğiYıldız Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. AHMET DEMİR
- Calculation of nitrous oxide emissions of municipal wastewater treatment plants under dynamic loads with simulation models
Kentsel atıksu arıtma tesislerinin dinamik yükler altında nitröz oksit emisyonlarının simülasyon modelleri ile hesaplanması
HÜSEYİN NALBANTO
Yüksek Lisans
İngilizce
2024
Çevre Mühendisliğiİstanbul Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. HAYRETTİN GÜÇLÜ İNSEL
- İklim değişikliğinin Türkiye tarımına etkileri
Impacts of climate change on Turkey agriculture
KÜBRA DAĞ