Aktif çamur arıtma tesisinin tasarımı, yağ sanayii atık sularına uyarlanması ve maliyet hesabı
Design of active mud treatment facility and its application on waste water of oil industry with related feasibility study
- Tez No: 134381
- Danışmanlar: PROF. DR. MAHMUT BAYRAMOĞLU
- Tez Türü: Yüksek Lisans
- Konular: Çevre Mühendisliği, Environmental Engineering
- Anahtar Kelimeler: Aktif çamur, Arıtma, Arıtma tesisleri, Bitkisel yağlar, Biyolojik arıtma, Özütleme, Activated sludge, Treatment, Treatment plants, Plant oils, Biological treatment, Extraction
- Yıl: 2003
- Dil: Türkçe
- Üniversite: Gebze Yüksek Teknoloji Enstitüsü
- Enstitü: Mühendislik ve Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Çevre Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
ÖZET \5^-^ Bu çalışmada şu konulara değinilmiştir :Bitkisel yağ sanayi üretiminde uygulanan yöntemler ekstraksiyon yöntemi, direkt ekstraksiyon yöntemi vb. Yöntemlerdir. Diğer taraftan Bitkisel yağ sanayi atıksularının arıtımında kullanılan yöntemler ise membran fıltrasyon yöntemi,yağ ayırma yöntemleri ve diğer yöntemlerdir. Ayrıca biyolojik arıtma tesisinin tasarımı, havalandırma ünitesinin alternatifleri ve maliyet analizi bu tezde değinilen diğer önemli konulardır. Bu çalışmada iki farklı havalandırma ünitesi karşılaştırılmıştır.Bunlar jet havalandırma sistemi ve difuzör sistemidir. Jet havlandırma sistemlerinin ilk yatırım maliyeti difüzörlü sistemlerin ilk yatırım maliyetinden daha ucuzdur. Jet havalandırıcıların çalışma sistemi difuzör sistemden daha kolaydır. Jet havalandırıcılı sistemlerde arıza olduğunda difüzörlü sistemler göre daha kolay tamir edilir. Diğer yandan difüzörlü sistemlerin çalışması jet havalandırmalı sistemlerden daha verimlidir ve de difüzörlü sistemler jet aeratörlü sistemlerden daha az elektrik harcarlar. Ayrıca difüzörlü sistem havalandırma tankında homojen havalandırmayı sağlar.
Özet (Çeviri)
SUMMARY These topics were explained in scope of the present work: Some methods are applied in the production of the vegetal oil industry, which are extraction method, direct extraction method and etc. On the other hand, some methods are applied for treating the vegetal oil industry wastewater, that are biological treatment, membrane filtration, oil separation and etc. In addition, other important topics are design of the biological wastewater treatment plant, alternating of the aeration unity and analysis of the cost in this thesis. Two different aeration unities were compared in this thesis, which are jet aeration system and diffusion system. The first investment coast in jet aeration system is cheaper than in the first investment coast in diffusion system. Working system in jet aeration is easier than in diffusion system. When the aeration system is broken down in jet aeration system is repaired easier than according to diffusion system. On the other hand, the working of diffusion system is more productive than jet aeration system. And also, the spending of the electric in diffusion system is less than in jet aeration system. In addition; the diffusion system is provided the homogeneous aeration in the aeration tank.
Benzer Tezler
- Kentsel atıksu arıtma tesisi anaerobik çamur çürütücülerinin dinamik proses modelleme yaklaşımı ile analizi
Analysis with dynamic process modeling approach of anaerobic sludge digesters of the urban wastewater treatment plant
KERİM EKİCİ
Yüksek Lisans
Türkçe
2018
Çevre Mühendisliğiİstanbul Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. HAYRETTİN GÜÇLÜ İNSEL
- Effect of high process temperature on carbon and nutrient removal mechanisms in activated sludge system
Aktif çamur sistemlerinde yüksek proses sıcaklığının karbon ve besi maddesi giderim mekanizmaları üzerine etkisi
NİLAY SAYI UÇAR
Doktora
İngilizce
2017
Çevre Mühendisliğiİstanbul Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. HAYRETTİN GÜÇLÜ İNSEL
- Marmara Bölgesinde kentsel atıksu arıtma tesislerinde aktif çamur modeli kullanarak proses optimizasyonu: Pilot ölçekli çalışma
Process optimization using activated sludge model in municipal wastewater treatment plants in Marmara Region: Pilot scale study
ELİF BURCU ATÇI
Doktora
Türkçe
2024
Çevre MühendisliğiYıldız Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. SELAMİ DEMİR
- Mathematical modelling and computer aided design of wastewater treatment plant
Atıksu arıtma tesisinin modellenmesi ve bilgisayar destekli dizaynı
TOLGA TUNCAL
Yüksek Lisans
İngilizce
2001
Çevre MühendisliğiDokuz Eylül ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. DAVUT ÖZDAĞLAR
- Modelling of the leachate treatment plant with membrane bioreactor process
Membran bioreaktör procesli bir sızıntı suyu arıtma tesisinin modellenmesi
CANSU DELİBAŞ
Yüksek Lisans
İngilizce
2022
Çevre Mühendisliğiİstanbul Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. İZZET ÖZTÜRK