Geri Dön

DA yüksek gerilim dirençsel bölücülerde ölçüm belirsizliğinin azaltılması için yeni yaklaşımlar

New approaches to reduce measurement uncertainity in HV DC resistive dividers

  1. Tez No: 135970
  2. Yazar: SERHAT YILMAZ
  3. Danışmanlar: PROF. DR. HASAN DİNÇER
  4. Tez Türü: Doktora
  5. Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
  6. Anahtar Kelimeler: YG dirençsel bölücüler, YG ölçüm standartları, ölçüm belirsizlikleri, PID denetim, bulanık denetim, YSA denetim
  7. Yıl: 2003
  8. Dil: Türkçe
  9. Üniversite: Kocaeli Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Elektronik ve Haberleşme Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 231

Özet

DA YÜKSEK GERİLİM DİRENÇSEL BÖLÜCÜLERDE ÖLÇÜM BELİRSİZLİĞİNİN AZALTBLMASI İÇİN YENİ YAKLAŞIMLAR Serhat YILMAZ

Özet (Çeviri)

NEW APPROACHES TO REDUCE MEASUREMENT UNCERTAINTY IN HV DC RESISTIVE DIVIDERS Serhat YILMAZ Index Terms: HV resistive dividers, HV measurement standarts, measurement uncertainties, PID control, fuzzy control, neural control In this study, design and realization of a dc voltage standart divider for highly precise measurement up to 5 kV is described. As to the effects of self heating of the resistors, chaotic distribution of this heat, leakage currents and corona effects are caused to error in measurements. Uncertainties arisen from the last two effects may be reduced by arrangements in design and construction of voltage divider systems. However, the self heating of the resistors and any temperature gradient along the resistor column is the major error source in precise measurements. New approaches are suggested and used in the system to reduce uncertainties in measurement. Thermal stabilisation of the device reduces the uncertainty in measurement on a large scale. Computer aided control of peltier cooling elements are added to keep the temperature at some certain degree and computer aided control of the circulation motor is added to approximate the temperature gradient to insignificant values. Several control methods are applied to eliminate the self-heating and heat gradient effects in the DC HV Resistive Divider. PID control, fuzzy control and neural network control programs are developed to control these effects of the system. Heat dispersion (conduction and convection) of the system is modelled to determine the number and place of the points of temperature data. Temperature sensors are placed to these suitable points for each state variables. Control outputs determine voltage of the peltier cooler and the circulation motor speed. The measurement uncertainty sourced by the heat effects are reduced to the values between 5-11 ppm. Accurate measurements of DC voltages at values above 10 V and calibrating other dividers are achieved by standart voltage dividers. The device that was realized has been the prototype of 1 00 kV DC Voltage Resistive Divider which is prepeared in TÜBİTAK-National Metrology Institute to be the DC high voltage standart of Turkey. m

Benzer Tezler

  1. An automation of high voltage impulse generator

    Yüksek darbe gerilimi üretecinin otomasyonu

    FARİD ABDOLALİZADEHGHAREHVERAN

    Yüksek Lisans

    İngilizce

    İngilizce

    2013

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    PROF. DR. AYDOĞAN ÖZDEMİR

  2. A 16-b 32 MSPS CMOS voltage output DAC in 0.18 um with 80+ dB simulated SFDR at 1 MHz output frequency

    1 MHz çıkış frekansında 80+ dB SFDR başarımı elde eden 0.18 um 16-b 32 MSPS CMOS gerilim çıkışlı sayısal-analog çevirici tasarımı

    ÇAĞLAR ÖZDAĞ

    Yüksek Lisans

    İngilizce

    İngilizce

    2015

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektronik ve Haberleşme Mühendisliği Ana Bilim Dalı

    DOÇ. DR. TÜRKER KÜYEL

  3. Senkron alçaltan çeviricide farklı anahtarlarla başarım karşılaştırılması

    A comparison of different types of switches used in synchronous buck converter design

    GÖZDE YILDIRIM KUYUMCU

    Yüksek Lisans

    Türkçe

    Türkçe

    2017

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. DERYA AHMET KOCABAŞ

  4. Yüksek gerilim labaratuvarlarının tasarımı ve deney devrelerinin incelenmesi

    Design of high voltage laboratories and analysis of test circuits

    MEHMET BAYRAK

    Yüksek Lisans

    Türkçe

    Türkçe

    1993

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Y.DOÇ.DR. ÖZCAN KALENDERLİ

  5. Silisyum karbür mosfet'ler için kontrollü aktif kapı sürücü tasarımı

    Controlled active gate driver design for silicon carbide mosfets

    OZAN GÜNEY DÜŞMEZER

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Elektrik ve Elektronik MühendisliğiHacettepe Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. DİNÇER GÖKCEN